by
WillLaPuerta
Six sided die made from a tangled bunch of octopi. Each octopus holds one to six little spheres to mark the number of the side.
by
notnorm
This is a 4 pack of female Mining gang members. They carry revolvers. Their height is actually 31mm which, oddly enough, has become pretty standard for 28mm scale. Their belts are equipped with grenades and pouches to face battle in a post apocalyptic future. They are attached at the feet by a double sprue which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm gaming base (not included) in order for them to stand properly. To include the base would have dramatically increased the printing cost. Suggestions and critiques are welcome and appreciated.
by
snowfox01
The venerable U-2 Spy plane in 1/285th scale. Imagine this baby flying over your wargame board, we did that's why we made them.
by
fasaxc
Set of 8 accessory 'meeple' follower pieces to be used with the game Carcassonne. These are standard-sized meeples.
I just received mine in indigo strong and flexible. I'm really pleased with the result. I can barely see the layers from the SLS process and the colour is great.
by
WillLaPuerta
Four, six, eight, ten, twelve, and twenty sided dice with gears surrounding each number. The gears do not move.
The sizes have been adjusted so that they match each other better than for the individually sold dice. The larger dice have been reduced and the six sided has been increased. These are no longer available in metal due to concerns over wall thickness.
by
josmar
Outline Chess - Bishop
Available in;
White Strong & Flexible
Black Strong & Flexible
Available in;
White Strong & Flexible
Black Strong & Flexible
Original Bounds
In: 0.8 w x 0.8 d x 3.2 h Cm: 2.1 w x 2.1 d x 8.1 hOriented Bounds (used for determining printability)
In: 0.8 w x 0.8 d x 3.2 h Cm: 2.1 w x 2.1 d x 8.1 h Vol: 0.49 cm³File Status
v3: BISHOP_1_1.STL - Uploaded on 14 Nov 2012 [Success] v2: BISHOP_1_1.STL - Uploaded on 22 Oct 2012 [Success] v1: BISHOP_1_1.STL - Uploaded on 19 Oct 2012 [Success] v0: Bishops_1_1.STL - Uploaded on 4 Aug 2011 Update this 3D file... Meters Inches MillimetersAllow downloads | Make this model a Co-Creator
by
ciskje
Chopper live a Harley D.
Best with paininting: White Strong
Best looking: White Detail
by
TOPO
The BBF bulk freighter is a medium cargo ship present in almost every transport fleet near the standard cargo containers. The ship can be used with or without the side containers, you can even use it with only two containers and use the other two as blocking terrain.
This model will work pretty well on a 8x8cm base and will be a great replacement for the Senator Shuttle in the escorting scenarios (forward movement must be "speed 1" only becouse with the larger base it is somehow faster than the shuttle).
I tryed my best to make it as cheap as possible. I've updated containers with a lot less material so it can be cheaper to get it.
Side docking points are compatible with the current and previous version of the containers.
IT IS HIGHLY RECOMENDED TO GET THE FULL SET OF 4 CONTAINERS AND AT LEAST THE 8X8cm BASE FOR THE SHIP.
+ 
+ 
+
This model will work pretty well on a 8x8cm base and will be a great replacement for the Senator Shuttle in the escorting scenarios (forward movement must be "speed 1" only becouse with the larger base it is somehow faster than the shuttle).
I tryed my best to make it as cheap as possible. I've updated containers with a lot less material so it can be cheaper to get it.
Side docking points are compatible with the current and previous version of the containers.
IT IS HIGHLY RECOMENDED TO GET THE FULL SET OF 4 CONTAINERS AND AT LEAST THE 8X8cm BASE FOR THE SHIP.
Want to get a set?
+ + + 
by
fasaxc
A set of accessory playing pieces for use with Carcassonne. Includes barn, cart, mayor, large meeple, pig and builder. (The pieces from "The Festival", "Traders and Builders", "Abbey and Mayor" and "Inn and Cathedral".)
by
Woetra
This piece was designed to be printed in stainless steel for use as a monopoly piece.
It is very small, and in stainless steel the tolerances have been pushed to their limits, causing some fused edges.
It is available in WSF and Detail materials, but I just love it in steel, for all that it has its flaws it is still desirably cute.
I hope you like it!
It is very small, and in stainless steel the tolerances have been pushed to their limits, causing some fused edges.
It is available in WSF and Detail materials, but I just love it in steel, for all that it has its flaws it is still desirably cute.
I hope you like it!
by
Odieoni
"You think the Brass Beetles are badass? Try clearing out infected tunnels protected by nothing but leather and cloth!"
When the British Empire moved to retake irradiated europe they found the infected hives had survived under ground. So began a grueling process of tunnel sweeping with armoured suit known as 'Brass Beetles'. To support these units the Royal marine corps had special infantry 'sealed' suits (made of leather and rubber). Armed with powerful clockwork reloader rifles these man weren't expected to be on the front lines but due to the shifting nature of the hives tunnels often are...
28mm figure
by
direwolf
The Nakajima Ki-43 Hayabusa (or Oscar) was one of the most common fighters for the Japanese Army. Like many Japanese fighters it was nimble but poorly armored. However, it was a succesful design that was responsible for shooting down more Allied aircraft than any other Japanese fighter. (Note: You may need a razor or knife to carefully remove the sprue from the models)
by
NBriggsDesign
A small die suspended within an outer frame. **NOTE** Please keep in mind the minimum detail of the material you choose to have this printed in as the numbers are only 0.4mm thick.
by
snowfox01
Easy-to-finish model ideal for both wargaming and the aircraft collector. The first twin-engine fighter to enter service with the USN, it also provided photo-reconnaissance and electronic warfare. The Tiger served in Korea and might be usable in Luftwaffe '46 scenarios. Over 350 were built.
by
josmar
Outline Chess - Knight
Available in;
White Strong & Flexible / Polished
Black Strong & Flexible
Available in;
White Strong & Flexible / Polished
Black Strong & Flexible
Original Bounds
In: -- w x -- d x -- h Cm: -- w x -- d x -- hOriented Bounds (used for determining printability)
In: 1.1 w x 0.8 d x 2.0 h Cm: 2.7 w x 2.1 d x 5.1 h Vol: 0.46 cm³File Status
v0: Knight_1_1.STL - Uploaded on 4 Aug 2011 [Success] Update this 3D file... Meters Inches MillimetersAllow downloads | Make this model a Co-Creator
by
snowfox01
The only J-7 available in 6mm scale. Easy-to-finish model ideal for both wargaming and the aircraft collector. Development of the MiG-21F serving primarily as an interceptor. Over 2400 built by Chengdu, including the F-7 export variant used by Iran, Pakistan, and other countries.
by
zankapfel
Eight dice, including d2, d4, d6, d8, 2d10, d12, and d20. These dice are about half the size of regular dice, the largest measuring only 2.25cm corner-to-corner. Each die is marked with pips. circular pips denote a one, rectangular pips denote a five.
One d10 is marked as the decader. The d4 is read by process of elimination; the bottom face is the number rolled. It may be a bit more form over function, but given the space constraints, it was the simplest way to make it.
One d10 is marked as the decader. The d4 is read by process of elimination; the bottom face is the number rolled. It may be a bit more form over function, but given the space constraints, it was the simplest way to make it.
by
snowfox01
Easy-to-finish model ideal for both wargaming and the aircraft collector. The Shenyang J-8 Finback is a twin-engined interceptor used by the People's Liberation Army and Navy Air Forces. Almost 400 are in service, including the F-8 export version.
by
Odieoni
The Mycanide spore spread incredibly quickly through the local air and water ways however after the 1950's, when it was largely decimated by nuclear bombs, Europe became increasing hostile to all life forms. In order to spread the super-evolutionary Mycanide developed creature capable of carrying small complete colonies away from the main hives in order to access various tunnels, caves and sewers that it was now infesting. -- 28mm scale mushroom based monster, part of the steampocalypse board game.
by
goebat
This knight is the showpiece from my Classic Chess set. The piece stands at around 3.5cm tall, and is solid apart from a recess in the base.
by
TOPO
Bases for your favorite Star Fighting Game. This ones are Fighter sized (4x4cm) and they're a cheaper version, with huge empty holes.
by
WillLaPuerta
All four the the six sided elemental dice including:
Wind Die based loosely on the symbols that represent wind speeds.
Fire Die with vertical wavy lines that resemble flames and smoke.
Water Die with horizontal wavy lines.
Earth Die with rigid horizontal lines representing layers of rock and dirt.
Wind Die based loosely on the symbols that represent wind speeds.
Fire Die with vertical wavy lines that resemble flames and smoke.
Water Die with horizontal wavy lines.
Earth Die with rigid horizontal lines representing layers of rock and dirt.
by
TOPO
Bases for your favorite Star Fighting Game. This ones are really big sized (8x8cm) and they're a cheaper version, with huge empty holes.
These are suitable for big custom/scratch build ships.
