by
TerraCotta
If M.C. Escher had owned fidget toys, he would have worn "One ring to rule the ball" as a pendant. A single, continuous line contains a small ball that makes orbit after mesmerizing orbit but cannot escape, always held down in four directions. Available in solid, durable stainless steel with optional antique bronze and gold plated finishes to fit any context, "One ring to rule the ball" now also includes a free rubber necklace so that you can confuse your mind any time the fancy strikes you! One customer echoes many others in saying, "I couldn't put it down. This thing is just too fun!"
Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com
Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com
by
CW&T
Pen not included. This sleeve is for Kickstarter backers of the Pen Type-A campaign. If you bought a USA made version of the pen at shop.cwandt.com, it'll fit, but it will not be a snug fit.
These sleeves sometimes comes with some extra powder in it, please make sure you get it all out. Video of powder removal -> https://vimeo.com/47323037
by
onetruecathal
Update: Dremelfuge is now provisionally available in the "Strong and Flexible" material, after some basic testing. No guarantee of safety is given, as always. The "Strong & Flexible" material Dremelfuge creates more vibration in use, which may indicate less stability than the "Grey Robust" (ABS) material.
Caveat Emptor: As always, Dremelfuge is sold as an ornament, and any use as a tool is a risk entirely taken by the purchaser/user. I accept no responsibility for the safety of Dremelfuge.
DremelFuge is a centrifuge rotor for use with a rotary tool such as the popular "Dremel". As an Open-Source Hardware, DIYbio-inspired design it is intended to enable and inspire scientists world-wide.
At a rotary speed of 33,000rpm (the top speed for a standard Dremel 300), Dremelfuge can deliver up to 52,000g/rcf (1g = the force of Earth's gravity) on a sample in a standard 1.5ml microcentrifuge tube, measured halfway down the tube. This far exceeds the speeds typically used in lab protocols.
Dremelfuge can be used to collect bacteria, proteins, DNA or anything else suspended in a sample. Dremelfuge can be used to extract plasmids from cultures, to purify and cleanse DNA after enzymatic reactions, to remove precipitated impurities or for any other task calling for a powerful centrifuge.
It requires only the 5mm cutting tool holder that comes with the Dremel 300.
For safety reasons, Dremelfuge is sold as an ornament or curio; although demonstrated to be effective and reliable for routine lab tasks, use of Dremelfuge for any task other than as a decorative item is performed entirely at the risk of the buyer. It is suggested that all appropriate safety precautions be taken in such cases, including but not limited to eye protection.
The source files for Dremelfuge are hosted on Thingiverse here:
http://www.thingiverse.com/thing:1483
DremelFuge is a centrifuge rotor for use with a rotary tool such as the popular "Dremel". As an Open-Source Hardware, DIYbio-inspired design it is intended to enable and inspire scientists world-wide.
At a rotary speed of 33,000rpm (the top speed for a standard Dremel 300), Dremelfuge can deliver up to 52,000g/rcf (1g = the force of Earth's gravity) on a sample in a standard 1.5ml microcentrifuge tube, measured halfway down the tube. This far exceeds the speeds typically used in lab protocols.
Dremelfuge can be used to collect bacteria, proteins, DNA or anything else suspended in a sample. Dremelfuge can be used to extract plasmids from cultures, to purify and cleanse DNA after enzymatic reactions, to remove precipitated impurities or for any other task calling for a powerful centrifuge.
It requires only the 5mm cutting tool holder that comes with the Dremel 300.
For safety reasons, Dremelfuge is sold as an ornament or curio; although demonstrated to be effective and reliable for routine lab tasks, use of Dremelfuge for any task other than as a decorative item is performed entirely at the risk of the buyer. It is suggested that all appropriate safety precautions be taken in such cases, including but not limited to eye protection.
The source files for Dremelfuge are hosted on Thingiverse here:
http://www.thingiverse.com/thing:1483
by
Bathsheba
This is part 1 of a snap-fit puzzle machine. When you turn the knob, it generates fun! This is the deluxe model, there's a smaller version here.
Here's all the parts:
+
+
+
+
+
+
+
+
I designed this for the SME Rapid 2011 trade show. The STL files are available free for use (the show logos have been stripped).
Here's all the parts:
+
+
+
+
+
+
+
+
I designed this for the SME Rapid 2011 trade show. The STL files are available free for use (the show logos have been stripped).
by
Andrewelee
Pen tube that takes a standard Bic Cristal tip.
*** I have only tried the pen in the Strong & Flexible material. Feel free to try other materials, but do so at your own risk. I cannot guarantee they will turn out okay. ***
*** I have only tried the pen in the Strong & Flexible material. Feel free to try other materials, but do so at your own risk. I cannot guarantee they will turn out okay. ***
by
BrianH
Latest revision of the Andraxis project!
For more information, news, pictures and updates, see the official XDA developers discussion thread:
http://forum.xda-developers.com/showthread.php?t=1476571
by
webmaster_duann
Downloadable 3D Printable Bumper for the iPhone 5. As per Apple's dimensions and we have checked the corners on the iPhone 5 against an existing case and it fits perfectly. You can download this file to customize and 3D Print for yourself. Sides and back have 1.4mm wall thickness so you can emboss or engrave. I have restricted the materials to our Nylon range as they are best suited for iPhone cases.
by
ruzkin
5.2cm tall creeper keychain, hollow inside with a 1.3mm wall. Textured on all sides, with a 5mm loop to fit your key ring. Does not sneak up on you. Does not explode.
by
dformer
a spacy, extraterrestrial object for keychains, the car, your bathroom, whatever : )
by
Bathsheba
This is part 2 of a snap-fit puzzle machine. When you turn the knob, it generates fun! This is the deluxe model, there's a smaller version here.
Here's all the parts:
+
+
+
+
+
+
+
+
Here's all the parts:
+
+
+
+
+
+
+
+
by
Bathsheba
This is part 4 of a snap-fit puzzle machine. When you turn the knob, it generates fun! This is the deluxe model, there's a smaller version here.
Here's all the parts:
+
+
+
+
+
+
+
+
Here's all the parts:
+
+
+
+
+
+
+
+
by
Bathsheba
This is part 3 of a snap-fit puzzle machine. When you turn the knob, it generates fun! This is the deluxe model, there's a smaller version here.
Here's all the parts:
+
+
+
+
+
+
+
+
Here's all the parts:
+
+
+
+
+
+
+
+
by
Bathsheba
This is part 5 of a snap-fit puzzle machine. When you turn the knob, it generates fun! This is the deluxe model, there's a smaller version here.
Here's all the parts:
+
+
+
+
+
+
+
+
Here's all the parts:
+
+
+
+
+
+
+
+
by
webmaster_duann
Downloadable 3D Printable Case for the iPhone 5.
As per Apple's dimensions and we have checked the corners on the iPhone 5 against an existing case and it fits perfectly. You can download this file to customize and 3D Print for yourself. Sides and back have 1.4mm wall thickness so you can emboss or engrave. I have restricted the materials to our Nylon range as they are best suited for iPhone cases.
by
mobileapes.industries
Part to be used as support for the light foam wheel. - part of the quadcopter frame (under development)
by
whiteykidz
arc reactor ring holder for the base holders
*This piece was updated today since I saw what i have to fix based on its arrival today
by
InnerbreedFX
DiaLFonZo produced the first prototype for his V-Tail copter frames in March 2012. This was one of two main size V-Tail frames he soon when on to produce. following the 500 size frame was the 400 size. To compliment this exception quadcopter frame 'InnerbreedFX has developed a canopy for it available for you to buy. for info on the canopy please contact: theinnerbreed@hotmail.co.uk for info on the V-Tail quadcopter frame itself please contact info@dialfonzo-copter.com
by
whiteykidz
arc reactor ring lights this piece connects to the base
*This piece was updated today since I saw what i have to fix based on its arrival today the wall thickness was thickened to 1.7 I believe.
by
whiteykidz
arc reactor base pieces that connect are the base holders, inner details and ring lights
*This piece was updated today since I saw what i have to fix based on its arrival today
by
duann
A variation on the Elevation Lightning Dock posted to correct wall thickness issues. http://www.shapeways.com/model/720997/
we are 3D printing now, to test in dock. will update with info ASAP.
$1 from all sales goes to hurricane Sandy Relief
by
Luma3Dprint
Both top and bottom parts are included in this model. Loads more info can be found on my website here; http://fusionweld.squarespace.com/blog/2012/3/8/raspberry-pi-custard.html. Spray it up yellow if you dare!
by
edjza80
Finally the official release of the SkyLight SBG Digital Brushless Gimbal for GoPro Hero 2 HD Cameras!!
Designed for the AlexMos SImple Brushless Gimbal Control (SBGC) board, the SkyLight open source gimbal project offers full 360deg 2 axis stabilisation capable gimbal, specifically for the GoPro Hero 2 HD camera (Hero 3 coming soon!). cheap, light, strong, and fully balanced and ready to go "out of the box / off the printer"
by
duann
Nokia has become the first major manufacturer to release 3D printable files so their customers can download, modify and 3D print components for their phone. Read about it on the Shapeways Blog.
This part has been printed in Nylon as supplied by Nokia. This model does not include the buttons which were too thin. I will modify this file a little and upload another version with buttons soon. Stay tuned
This is the Rear shell for Nokia Lumia 820 shell with all parts. It is available for 3D printing as is in Nylon, or you can download and modify the file with any cosmetic or functional feature you like.
Nokia has released this file under a Creative Commons License
You can read more about their file on the Nokia Developer site.
Please read Nokia's terms and conditions, and sharing protocol.
by
ValerianoGarciaGonzalez
Funda sencilla para Iphone 4 con protección extra en las esquinas.
by
7777773
Key
There's an interesting story behind this model, the file was made from a digital photograph of a handcuff key.
Read about it here: http://blackbag.nl/?p=940
There's an interesting story behind this model, the file was made from a digital photograph of a handcuff key.
Read about it here: http://blackbag.nl/?p=940
