by
whiteykidz
arc reactor ring lights this piece connects to the base
*This piece was updated today since I saw what i have to fix based on its arrival today the wall thickness was thickened to 1.7 I believe.
by
whiteykidz
arc reactor base pieces that connect are the base holders, inner details and ring lights
*This piece was updated today since I saw what i have to fix based on its arrival today
by
duann
A variation on the Elevation Lightning Dock posted to correct wall thickness issues. http://www.shapeways.com/model/720997/
we are 3D printing now, to test in dock. will update with info ASAP.
$1 from all sales goes to hurricane Sandy Relief
by
Luma3Dprint
Both top and bottom parts are included in this model. Loads more info can be found on my website here; http://fusionweld.squarespace.com/blog/2012/3/8/raspberry-pi-custard.html. Spray it up yellow if you dare!
by
edjza80
Finally the official release of the SkyLight SBG Digital Brushless Gimbal for GoPro Hero 2 HD Cameras!!
Designed for the AlexMos SImple Brushless Gimbal Control (SBGC) board, the SkyLight open source gimbal project offers full 360deg 2 axis stabilisation capable gimbal, specifically for the GoPro Hero 2 HD camera (Hero 3 coming soon!). cheap, light, strong, and fully balanced and ready to go "out of the box / off the printer"
by
duann
Nokia has become the first major manufacturer to release 3D printable files so their customers can download, modify and 3D print components for their phone. Read about it on the Shapeways Blog.
This part has been printed in Nylon as supplied by Nokia. This model does not include the buttons which were too thin. I will modify this file a little and upload another version with buttons soon. Stay tuned
This is the Rear shell for Nokia Lumia 820 shell with all parts. It is available for 3D printing as is in Nylon, or you can download and modify the file with any cosmetic or functional feature you like.
Nokia has released this file under a Creative Commons License
You can read more about their file on the Nokia Developer site.
Please read Nokia's terms and conditions, and sharing protocol.
by
ValerianoGarciaGonzalez
Funda sencilla para Iphone 4 con protección extra en las esquinas.
by
7777773
Key
There's an interesting story behind this model, the file was made from a digital photograph of a handcuff key.
Read about it here: http://blackbag.nl/?p=940
There's an interesting story behind this model, the file was made from a digital photograph of a handcuff key.
Read about it here: http://blackbag.nl/?p=940
by
alexicon3000
This is a mounting solution for attaching a Primesense Asus Xtion Pro or Asus Xtion Pro Live to a DSLR or other camera for hybrid depth sensor/HD video filmmaking. This mount is a part of the RGBDtoolkit project http://rgbdtoolkit.com
This mount is designed for use with a specific quick-release mechanism. Mountable on a standard 1/4-20 tripod mount, should have adequate clearance for normal tripods and larger video tripods.
Supplies needed:
Quick Release Adapter Set,
1/4"-20 x 1/4 Brad Hole Tee Nut,
1” 1/4"-20 flat head countersunk screw,
1/4-20 nut
by
kscoombs
5cm tall desk buddy I created years ago when I was first learning to use 3D modeling software. Had to make some adjustments to make him printable of course.
by
josullivan
***This is still being designed and tested***
This design is a case for a spectrophotometer on an iPhone case. There are three pieces that need to be printed as part of the design. You can download the case here and you can find the other ones by going to my profile or through these links.
Tube:
http://shpws.me/dxSV
Slide:
http://shpws.me/dxm6
You can print the designs through Shapeways. It is relatively cheap and you aren't paying any expenses to me.
*****IMPORTANT*****
In order to have the complete spectrophotometer, you need to have the three pieces printed and you also need to buy a linear diffraction grating (1000 lines/mm). You can find very cheap diffraction gratings on sites like ebay or amazon. Just search for linear diffraction gratings 1000 lines/mm and the gratings should be 2" X 2".
Here are some links to websites that sell them:
http://www.rainbowsymphonystore.com/difgratslidl.html
http://www.ebay.com/itm/Diffraction-Grating-Slide-Holographic-Linear-1000-lines-mm-Lamp-Laser-Spectrum-/270818868831
http://www.sciencestuff.com/prod/P-c/0529-L
http://www.cajunlasers.com/store/index.php?main_page=product_info&products_id=9
http://www.amazon.com/Diffraction-Grating-Slide-Excellent-demonstrating/dp/B006ZBG7XM/ref=pd_sxp_f_pt
*****IMPORTANT*****
It is easy to put together the 3 printed pieces and the diffraction grating. They all slide together and the iPhone case slips on right on top of an iPhone.
The complete case is very lightweight and is easy to use. I highly recommend using the black plastic material to make the printed pieces. This is so extraneous light doesn't make its way into the tube. Don't use any translucent building material.
With this case and diffraction grating you will be able to point the end of the case at any object and you will be able to see the spectral lines for the light being emitted or reflected off of that object. You can point it at a fluorescent light, for example, and see the spectral lines for the light being emitted. You can take pictures of the spectrum with the camera on your iPhone and use them for whatever you want. You could also use it as a colorful background picture.
This design is a case for a spectrophotometer on an iPhone case. There are three pieces that need to be printed as part of the design. You can download the case here and you can find the other ones by going to my profile or through these links.
Tube:
http://shpws.me/dxSV
Slide:
http://shpws.me/dxm6
You can print the designs through Shapeways. It is relatively cheap and you aren't paying any expenses to me.
*****IMPORTANT*****
In order to have the complete spectrophotometer, you need to have the three pieces printed and you also need to buy a linear diffraction grating (1000 lines/mm). You can find very cheap diffraction gratings on sites like ebay or amazon. Just search for linear diffraction gratings 1000 lines/mm and the gratings should be 2" X 2".
Here are some links to websites that sell them:
http://www.rainbowsymphonystore.com/difgratslidl.html
http://www.ebay.com/itm/Diffraction-Grating-Slide-Holographic-Linear-1000-lines-mm-Lamp-Laser-Spectrum-/270818868831
http://www.sciencestuff.com/prod/P-c/0529-L
http://www.cajunlasers.com/store/index.php?main_page=product_info&products_id=9
http://www.amazon.com/Diffraction-Grating-Slide-Excellent-demonstrating/dp/B006ZBG7XM/ref=pd_sxp_f_pt
*****IMPORTANT*****
It is easy to put together the 3 printed pieces and the diffraction grating. They all slide together and the iPhone case slips on right on top of an iPhone.
The complete case is very lightweight and is easy to use. I highly recommend using the black plastic material to make the printed pieces. This is so extraneous light doesn't make its way into the tube. Don't use any translucent building material.
With this case and diffraction grating you will be able to point the end of the case at any object and you will be able to see the spectral lines for the light being emitted or reflected off of that object. You can point it at a fluorescent light, for example, and see the spectral lines for the light being emitted. You can take pictures of the spectrum with the camera on your iPhone and use them for whatever you want. You could also use it as a colorful background picture.
by
marsman12019
4-in-1 European Chain Mail modeled with the parametric Grasshopper plugin for Rhino 4.
The rings have a diameter of 8.32mm, and are made of 1.62mm diameter wire, so you can print in polished Alumide (which looks incredible, by the way).
by
josullivan
***This is still being designed and tested***
This design is the tube for a spectrophotometer on an iPhone case. There are three pieces that need to be printed as part of the design. You can download the tube here and you can find the other two by going to my profile or through these links.
Case:
http://shpws.me/dxR8
Slide:
http://shpws.me/dxm6
You can print the designs through Shapeways. It is relatively cheap and you aren't paying any expenses to me.
*****IMPORTANT*****
In order to have the complete spectrophotometer, you need to have the three pieces printed and you also need to buy a linear diffraction grating (1000 lines/mm). You can find very cheap diffraction gratings on sites like ebay or amazon. Just search for linear diffraction gratings 1000 lines/mm and the gratings should be 2" X 2".
Here are some links to websites that sell them:
http://www.rainbowsymphonystore.com/difgratslidl.html
http://www.ebay.com/itm/Diffraction-Grating-Slide-Holographic-Linear-1000-lines-mm-Lamp-Laser-Spectrum-/270818868831
http://www.sciencestuff.com/prod/P-c/0529-L
http://www.cajunlasers.com/store/index.php?main_page=product_info&products_id=9
http://www.amazon.com/Diffraction-Grating-Slide-Excellent-demonstrating/dp/B006ZBG7XM/ref=pd_sxp_f_pt
*****IMPORTANT*****
It is easy to put together the 3 printed pieces and the diffraction grating. They all slide together and the iPhone case slips on right on top of an iPhone.
The complete case is very lightweight and is easy to use. I highly recommend using the black plastic material to make the printed pieces. This is so extraneous light doesn't make its way into the tube. Don't use any translucent building material.
With this case and diffraction grating you will be able to point the end of the case at any object and you will be able to see the spectral lines for the light being emitted or reflected off of that object. You can point it at a fluorescent light, for example, and see the spectral lines for the light being emitted. You can take pictures of the spectrum with the camera on your iPhone and use them for whatever you want. You could also use it as a colorful background picture.
This design is the tube for a spectrophotometer on an iPhone case. There are three pieces that need to be printed as part of the design. You can download the tube here and you can find the other two by going to my profile or through these links.
Case:
http://shpws.me/dxR8
Slide:
http://shpws.me/dxm6
You can print the designs through Shapeways. It is relatively cheap and you aren't paying any expenses to me.
*****IMPORTANT*****
In order to have the complete spectrophotometer, you need to have the three pieces printed and you also need to buy a linear diffraction grating (1000 lines/mm). You can find very cheap diffraction gratings on sites like ebay or amazon. Just search for linear diffraction gratings 1000 lines/mm and the gratings should be 2" X 2".
Here are some links to websites that sell them:
http://www.rainbowsymphonystore.com/difgratslidl.html
http://www.ebay.com/itm/Diffraction-Grating-Slide-Holographic-Linear-1000-lines-mm-Lamp-Laser-Spectrum-/270818868831
http://www.sciencestuff.com/prod/P-c/0529-L
http://www.cajunlasers.com/store/index.php?main_page=product_info&products_id=9
http://www.amazon.com/Diffraction-Grating-Slide-Excellent-demonstrating/dp/B006ZBG7XM/ref=pd_sxp_f_pt
*****IMPORTANT*****
It is easy to put together the 3 printed pieces and the diffraction grating. They all slide together and the iPhone case slips on right on top of an iPhone.
The complete case is very lightweight and is easy to use. I highly recommend using the black plastic material to make the printed pieces. This is so extraneous light doesn't make its way into the tube. Don't use any translucent building material.
With this case and diffraction grating you will be able to point the end of the case at any object and you will be able to see the spectral lines for the light being emitted or reflected off of that object. You can point it at a fluorescent light, for example, and see the spectral lines for the light being emitted. You can take pictures of the spectrum with the camera on your iPhone and use them for whatever you want. You could also use it as a colorful background picture.
by
VeryWetPaint
This shopping-bag hook holds bags so they won't slide around the MINI's floor. It's also convenient for temporarily hanging small objects, keys, and drive-thru orders.
This attaches to the wire frame of the cup holder accessory, so it's compatible with MINI models that included a cup holder attached to the center stack:
Hardtop MINI Cooper (R50/R53) years 2002-2006
Convertible MINI Cooper (R52) years 2005-2008
by
thorwil
A connection piece to be used between the oversize clamp and Busch & Müller Ixon Bicycle Headlights. It's modeled based on the original part, but the top is put on in reverse. See http://thorwil.wordpress.com/2012/02/25/3d-printing-to-the-rescue/ for details
by
trearick
Part of a wire leg for a multirotor. Each leg needs two hinges. It is held to 1/2" (13mm) square arm with two zip ties. The hinge either holds the end of the wire leg or the wide end of the cross arm.
by
keitarusm
This is a basic bezel to fit over the TimeSquared watch made by adafruit industries. The watch is excellent by itself, but the LED matrix that makes up the face has very sharp edges.
by
sheridan
Customise your iPhone cases surface pattern online - copy and paste the link below into your browser:
http://thingsmaker.com/create/wizard?start_product=cd11206e-a81a-11e2-a7ca-1231393df550
:Then when you've done, copy the link to your product and send it to me @ info@designpartners.co.uk - also give me the words you want down the sides!
Any phone model by request.
iPhone Art Case
Adaptable Parameters in natural surface decorations.
by
bubby9534
This is a fun 1/16 music note that can be used to decorate in a music room or anything musical. It has been tested for sturdiness and is quite robust in WSF.
by
alexicon3000
For use in either handheld shooting scenarios where a tripod mount point is not needed or to attach to rail systems or camera rig, in which case you won’t need a QR adapter. If you are using this for the RGBDtoolkit workflow you will want to have a way to attach to a tripod for the purposes of calibration. Sensor: Primesense ASUS Xtion Pro & Xtion Pro Live Supplies needed: Quick Release Adapter Set, 1” 1/4-20 countersunk screw, 1/4-20 nut. This can easily be mounted on the hotshoe of your camera with a part like the 1/4"- 20 Tripod Screw to Hot Shoe Adapter.
by
purligar
Adapter ring for helix lamp and E27 bulb socket.
This part can be downloaded and modified if necessary.
This part can be downloaded and modified if necessary.
by
dhdecandia
4 required for whole assembly
This is the second bone, the middle, finger bone (not middle-finger bone), for all four fingers, including the pinky.
by
dhdecandia
4 required for whole assembly
This is the tip of the fingers, not the thumb, of the bob
