Discover » Gadgets
by
Mstyle183
This is an iphone 4/4s case
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card organizer, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. ** This Design has been printed and tested.. You can now safely purchase it.
** metal piece for the bottle opener has been created but it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.
Go to http://www.amznfx.com/shopping-cart/
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card organizer, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. ** This Design has been printed and tested.. You can now safely purchase it.
** metal piece for the bottle opener has been created but it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.
Go to http://www.amznfx.com/shopping-cart/
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
by
joabaldwin
Endless motherf$#&ing bacon! A full color, delicious strip of bacon, twisted around itself, having only one side.
All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.
-- Kosher. Vegan friendly. --
Disclaimer for idiots: Don't eat it.
All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.
-- Kosher. Vegan friendly. --
Disclaimer for idiots: Don't eat it.
by
juniortan
A satire on superheroes, gadgets, consumerism and small caliber arms. As featured on Gizmodo, the Revolver iPhone is as irreverent, silly, amusing and provocative as ever.
http://gizmodo.com/#!5551267/irevolver
Please note that the model has been updated with a lot less material needed for printing (cheaper), and now incorporates a slot and space for an original iPhone USB cable, so you don't have to dismount the phone to charge/sync.
This iPhone case is designed to only fit the iPhone 4, and fit is by press fit; you may need to sand the inner surface to hold the iPhone properly.
IMPORTANT:
You need to order the USB cradle separately.
http://www.shapeways.com/model/230215/iphone4_ruger___usb_cradle.html?gid=ug40945
http://gizmodo.com/#!5551267/irevolver
Please note that the model has been updated with a lot less material needed for printing (cheaper), and now incorporates a slot and space for an original iPhone USB cable, so you don't have to dismount the phone to charge/sync.
This iPhone case is designed to only fit the iPhone 4, and fit is by press fit; you may need to sand the inner surface to hold the iPhone properly.
IMPORTANT:
You need to order the USB cradle separately.
http://www.shapeways.com/model/230215/iphone4_ruger___usb_cradle.html?gid=ug40945
by
tedk727
iphone4 bumper snap fits. Protect your iphone with distinctive style. Thin profile minimizes extra volume on your iphone.
*Updated on 4/20/2011. Design has been modified for easy fit & release. Lock key is added.
*Updated on 4/20/2011. Design has been modified for easy fit & release. Lock key is added.
by
curvecreative
Headbuddy
Apple headphones are great. Stylish, iconic and there when you need them. But we like to run and our Apple headphones don't.
The Headbuddy is a simple and affordable solution that means you can use your existing Apple headphones in a more effective way while running.
Just loop your headphones into the Headbuddy and you're good to go. The earbuds are held securely in such a way that retains the sound quality. Also works with handsfree.
Suitable for nearly all size and shape heads. Available in a range of colors
Click here to visit our site
Or click here to keep up to date on Facebook
by
cinemo
This pencil and pen holder is made of first 500 digits of Pi (actually 546 exactly), the numbers are arranged along a spiral path. As you can see from the photos, the printing (Black Strong &Flexible) is very delicate and detailed. This desk accessory is both useful and decorative.
by
noesis
The CardCase is now customizable! See Below
The CardCase for the IPhone 4 does what other card carrying IPhone cases can do and then some!
The sleek, patent pending, snap-on case not only protects your IPhone, but can also replaces your wallet or current business card holder and the integrated card slot on the side allows you to use any available card as an instant stand in portrait or landscape mode! Perfect for watching movies on the go, Facetime chatting, or using your IPhone as an alarm clock!
The CardCase can comfortably hold 2 credit or ID cards, or 4-5 business cards, and works perfectly with either the AT&T or Verizon IPhone versions.
And the CardCase is now customizable! When ordering you can change the side text to anything you'd like up to 15 characters (company name, twitter username, real name etc.) you can also choose the text orientation and alignment.
Designed by Noesis Design Lab and manufactured by Shapeways, this durable nylon polyamide case has a unique look and grippy feel to help keep your IPhone (and cards) safe.
The case is shipped worldwide directly from Shapeways.
Available in a multitude of colors If you don't specify a color, the default is white
The CardCase for the IPhone 4 does what other card carrying IPhone cases can do and then some!
The sleek, patent pending, snap-on case not only protects your IPhone, but can also replaces your wallet or current business card holder and the integrated card slot on the side allows you to use any available card as an instant stand in portrait or landscape mode! Perfect for watching movies on the go, Facetime chatting, or using your IPhone as an alarm clock!
The CardCase can comfortably hold 2 credit or ID cards, or 4-5 business cards, and works perfectly with either the AT&T or Verizon IPhone versions.
And the CardCase is now customizable! When ordering you can change the side text to anything you'd like up to 15 characters (company name, twitter username, real name etc.) you can also choose the text orientation and alignment.
Designed by Noesis Design Lab and manufactured by Shapeways, this durable nylon polyamide case has a unique look and grippy feel to help keep your IPhone (and cards) safe.
The case is shipped worldwide directly from Shapeways.
Available in a multitude of colors If you don't specify a color, the default is white
by
solid_modeler
The first 3D Printed iPhone 5 Bumper designed to account for differences in outside temperatures that can make other 3D printed bumpers looser and tighter.
HeatLock is designed to be too small for your iPhone 5, which may sound strange, but is actually a revolutionary concept. As the bumper gets hotter, the plastic nylon it is made out of will expand, causing the bumper to get bigger. If the bumper starts too small for the phone, you could heat it up enough to get the case on, then as it cools it will fit perfectly.When your case arrives simply heat it up with a blow dryer or heat gun for a few seconds to expand the plastic. Slip the case on and allow a few minutes for it to cool off. The case should shrink down so that it is snug to your phone.
Prototyping is complete! Model will fit very snug on an iPhone 5 after heating!
Using your bumper:
1. Unpack from box
2. Heat corners of bumper
3. Stretch onto iPhone
4. Keep heating and stretching until bumper fits
5. Enjoy!
To undo case, reverse process. iPhone will not be damaged by added heat; however, Shapeways nor SolidWorks Tech Designs assumes responsibility for any damage done to your iPhone.
Heat Resistance Guide for Materials :
White Strong and Flexible or Colored : 176 Degrees F
White or Black Detail : 118.4 Degrees F
Frosted Plastics : 176 Degrees F
Updates :
10/14/2012 : Model complete. Anylasis inside SolidWorks with an iPhone 5 model confirms all sides overlap iPhone by about 1/30th of its width and height. Holes should align after heating and cooling. Model uploaded.
10/24/12: Model recieved, inaccuracies corrected. Overall size increases and hole location changes. Overall width increased. Ordered another prototype to test new changes.
11/13/12: 2nd Version received. Model is correct and will now work with a slight heat. Model price increased- no longer in prototype.
Please order this case if you are slightly interested and let me know how it turns out! Feel free to DM any messages or questions you may have about design. Stay tuned for future updates!
by
Mstyle183
This is an iphone 4/4s case
This is the cleaner and more sleek version of the all in one iphone case.. Main difference is that this one does not have a bottle opener. Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card holder, money clip, earphone organizer.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials..
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
This is the cleaner and more sleek version of the all in one iphone case.. Main difference is that this one does not have a bottle opener. Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card holder, money clip, earphone organizer.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials..
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
by
mu3d93
This is a fun gadget that you can have you in house to show your friends how the sphere was printed inside the rail and you can never detach it!
by
COVO
Product Name "Ring of the gamer". Designed by Japan.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
by
onetruecathal
Update: Dremelfuge is now provisionally available in the "Strong and Flexible" material, after some basic testing. No guarantee of safety is given, as always. The "Strong & Flexible" material Dremelfuge creates more vibration in use, which may indicate less stability than the "Grey Robust" (ABS) material.
Caveat Emptor: As always, Dremelfuge is sold as an ornament, and any use as a tool is a risk entirely taken by the purchaser/user. I accept no responsibility for the safety of Dremelfuge.
DremelFuge is a centrifuge rotor for use with a rotary tool such as the popular "Dremel". As an Open-Source Hardware, DIYbio-inspired design it is intended to enable and inspire scientists world-wide.
At a rotary speed of 33,000rpm (the top speed for a standard Dremel 300), Dremelfuge can deliver up to 52,000g/rcf (1g = the force of Earth's gravity) on a sample in a standard 1.5ml microcentrifuge tube, measured halfway down the tube. This far exceeds the speeds typically used in lab protocols.
Dremelfuge can be used to collect bacteria, proteins, DNA or anything else suspended in a sample. Dremelfuge can be used to extract plasmids from cultures, to purify and cleanse DNA after enzymatic reactions, to remove precipitated impurities or for any other task calling for a powerful centrifuge.
It requires only the 5mm cutting tool holder that comes with the Dremel 300.
For safety reasons, Dremelfuge is sold as an ornament or curio; although demonstrated to be effective and reliable for routine lab tasks, use of Dremelfuge for any task other than as a decorative item is performed entirely at the risk of the buyer. It is suggested that all appropriate safety precautions be taken in such cases, including but not limited to eye protection.
The source files for Dremelfuge are hosted on Thingiverse here:
http://www.thingiverse.com/thing:1483
DremelFuge is a centrifuge rotor for use with a rotary tool such as the popular "Dremel". As an Open-Source Hardware, DIYbio-inspired design it is intended to enable and inspire scientists world-wide.
At a rotary speed of 33,000rpm (the top speed for a standard Dremel 300), Dremelfuge can deliver up to 52,000g/rcf (1g = the force of Earth's gravity) on a sample in a standard 1.5ml microcentrifuge tube, measured halfway down the tube. This far exceeds the speeds typically used in lab protocols.
Dremelfuge can be used to collect bacteria, proteins, DNA or anything else suspended in a sample. Dremelfuge can be used to extract plasmids from cultures, to purify and cleanse DNA after enzymatic reactions, to remove precipitated impurities or for any other task calling for a powerful centrifuge.
It requires only the 5mm cutting tool holder that comes with the Dremel 300.
For safety reasons, Dremelfuge is sold as an ornament or curio; although demonstrated to be effective and reliable for routine lab tasks, use of Dremelfuge for any task other than as a decorative item is performed entirely at the risk of the buyer. It is suggested that all appropriate safety precautions be taken in such cases, including but not limited to eye protection.
The source files for Dremelfuge are hosted on Thingiverse here:
http://www.thingiverse.com/thing:1483
