Discover » Gadgets
by
JoshuaHarker
My iPhone 5 case. The jaw serves as a clip for your pocket, pack strap, purse, belt, sock, underpants, or karate head band, etc. You can also stuff cash, credit cards, business cards, etc under the skull. The shapes reference the 6 primitives used in digital modeling. RIP Steve Jobs
by
be_on_edge
Flip Key Bottom Shell for Nissan Qashqai, with Nissan logo socket, plain clear New V4 Model.
This is a V4 bottom shell, so must be ordered with a V4 top shell.
Chiave a scatto per Nissan Qashqai guscio inferiore con sede per logo Nissan. Nuovo modello V4.
Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&
This is a V4 bottom shell, so must be ordered with a V4 top shell.
Chiave a scatto per Nissan Qashqai guscio inferiore con sede per logo Nissan. Nuovo modello V4.
Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&
by
virtox
A triply model, composed of three interlocked but separate matrices, which is nearly impossible to make without 3d printing!
Suitable as pendant, key fob or fidget toy :-)
Also available as a pair of earrings(including silver hooks).
Designed for the Strong and Flexible materials.
Strut thickness : 1mm.
Hole size 4-5 mm.
Big available here: here it is.
Suitable as pendant, key fob or fidget toy :-)
Also available as a pair of earrings(including silver hooks).
Designed for the Strong and Flexible materials.
Strut thickness : 1mm.
Hole size 4-5 mm.
Big available here: here it is.
by
be_on_edge
Flip Key Top Shell for Nissan Qashqai, with cutted logo New V4 Model.
This is a V4 top shell, so must be ordered with a V4 bottom shell.
Chiave a scatto per Nissan Qashqai guscio superiore con scritta Qashqai scavata. Nuovo modello V4.
Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&
This is a V4 top shell, so must be ordered with a V4 bottom shell.
Chiave a scatto per Nissan Qashqai guscio superiore con scritta Qashqai scavata. Nuovo modello V4.
Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&
by
shengchiehchang
Protective and decorative case for iPhone 5. It is a monocoque with double layered "brain cell" structures.
by
be_on_edge
This is Top Shell V4 combined with Bottom Sheel V4 logo.
This make you easy to place order and also save around $5 compared to individual purchase !!! (on Black strong & flexible material)
Parts will need to be separated before assembly.
Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&
This make you easy to place order and also save around $5 compared to individual purchase !!! (on Black strong & flexible material)
Parts will need to be separated before assembly.
Note: have a look at the instructions page here: http://www.shapeways.com/forum/index.php?t=msg&th=3964&start=0&
by
grigr
grigorusha Elemental Cube - world's smallest Rubik's Cube 8mm
world's smallest Rubik's Cube - for sale
its full functionaly Rubik's cube in small size (8mm)
forum link - http://www.twistypuzzles.com/forum/viewtopic.php?f=15&t=21839
youtube review video - http://www.youtube.com/watch?v=Q0UN50FLwtc
My puzzle Ten Cube world's smallest Rubik's Cube 10mm (same as Microbic Rubik's Cube 12mm) got into the Guinness Book! and I'm absolutely nothing to do did not do;)
http://www.guinessworldrecords.com/Search/Details/Smallest-Rubik's-Cube/74256.htm
very interesting: 8*8 mm cube placed in a 08/08 day
how to assemble this Cube:
http://www.shapeways.com/forum/index.php?t=msg&goto=33589
world's smallest Rubik's Cube - for sale
its full functionaly Rubik's cube in small size (8mm)
forum link - http://www.twistypuzzles.com/forum/viewtopic.php?f=15&t=21839
youtube review video - http://www.youtube.com/watch?v=Q0UN50FLwtc
My puzzle Ten Cube world's smallest Rubik's Cube 10mm (same as Microbic Rubik's Cube 12mm) got into the Guinness Book! and I'm absolutely nothing to do did not do;)
http://www.guinessworldrecords.com/Search/Details/Smallest-Rubik's-Cube/74256.htm
very interesting: 8*8 mm cube placed in a 08/08 day
how to assemble this Cube:
http://www.shapeways.com/forum/index.php?t=msg&goto=33589
by
curvecreative
Bugle for iPhone 4 / 4S
Enjoy your music louder with the Bugle
The Bugle is a natural acoustic amplifier for your iPhone that fits snuggly over the speaker, acts as a stand and makes your music sound better and louder. The Bugle is curved to provide a natural flex that assures a snug fit on your iPhone.
A great solution for bringing anywhere and requires no batteries. Just chuck it in your bag and use it for music at the park, for watching a film, or for sharing a youtube video
iPhone 5 version available here
by
boustalahit
This figurine is a fan art inspired by the great game "Day of the Tentacles" back in the nineties. This one is the nice and gentle green tentacle, who like to play guitar (but he doesn't have arms... HOW DOES HE DO ?)
I really recommand you the game if you find it somewhere (it's a collector now).
Please note that I don't do any markup on the price. I'd love your comment on your order too :)
by
tomatenfisch
Thinkpad Caddy for Micro SATA to 44pin IDE Adapter
This caddy is designed to carry a Micro-SATA to IDE Adapter (purchase from www.microsatacables.com) and a 1.8" SSD or HDD of 5mm height. It is useful for updating oldschool Thinkpads (e.g. T42) having an IDE interface with modern SATA SSDs. The caddy has the size and shape of a 2.5" HDD mounted into a Thinkpad HDD caddy (thus, the original Thinkpad HDD caddy is not needed any more).
How to use
Order caddy, adapter and 1.8" SSD (5mm high). Please, note: You will get the caddy only from here. Assemble as described below and replace original HDD. In case you do not know how to replace the old HDD: Let it be done from the next Thinkpad addict you can catch or downlad your Thinkpads HMM (Hardware Maintenance Manual) from Lenovos website.
Assembly
1. Put the adapter in place: Insert it with the pins ahead slanted from above. Push it slightly down forward into the adapters holder.
2. Put the SSD in place: Slide it in from the caddys backside.
3. In case, you worry about possible disengagement of the SSD from the adapter you might fix the SSD with tape (wrap it around the back beam).
This caddy is designed to carry a Micro-SATA to IDE Adapter (purchase from www.microsatacables.com) and a 1.8" SSD or HDD of 5mm height. It is useful for updating oldschool Thinkpads (e.g. T42) having an IDE interface with modern SATA SSDs. The caddy has the size and shape of a 2.5" HDD mounted into a Thinkpad HDD caddy (thus, the original Thinkpad HDD caddy is not needed any more).
How to use
Order caddy, adapter and 1.8" SSD (5mm high). Please, note: You will get the caddy only from here. Assemble as described below and replace original HDD. In case you do not know how to replace the old HDD: Let it be done from the next Thinkpad addict you can catch or downlad your Thinkpads HMM (Hardware Maintenance Manual) from Lenovos website.
Assembly
1. Put the adapter in place: Insert it with the pins ahead slanted from above. Push it slightly down forward into the adapters holder.
2. Put the SSD in place: Slide it in from the caddys backside.
3. In case, you worry about possible disengagement of the SSD from the adapter you might fix the SSD with tape (wrap it around the back beam).
by
Kidmechano
Build and customize your own Action Bot!- Modular, upgradeable, figure kit- highly poseable, snap-fit, ball joint construction! **This figure includes both knife and sheath accessories.** You can see a video showing how the figure assembles in the product pictures embedded above and a turnable 3d viewer of the model at- http://skfb.ly/5k4hedcb Enjoy!
by
joabaldwin
Endless motherf$#&ing bacon! A full color, delicious strip of bacon, twisted around itself, having only one side.
All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.
-- Kosher. Vegan friendly. --
Disclaimer for idiots: Don't eat it.
All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.
-- Kosher. Vegan friendly. --
Disclaimer for idiots: Don't eat it.
by
Mstyle183
This is an iphone 4/4s case
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card organizer, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. ** This Design has been printed and tested.. You can now safely purchase it.
** metal piece for the bottle opener has been created but it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.
Go to http://www.amznfx.com/shopping-cart/
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card organizer, money clip.. and YES a bottle OPENER.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials.. ** This Design has been printed and tested.. You can now safely purchase it.
** metal piece for the bottle opener has been created but it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.
Go to http://www.amznfx.com/shopping-cart/
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
by
juniortan
A satire on superheroes, gadgets, consumerism and small caliber arms. As featured on Gizmodo, the Revolver iPhone is as irreverent, silly, amusing and provocative as ever.
http://gizmodo.com/#!5551267/irevolver
Please note that the model has been updated with a lot less material needed for printing (cheaper), and now incorporates a slot and space for an original iPhone USB cable, so you don't have to dismount the phone to charge/sync.
This iPhone case is designed to only fit the iPhone 4, and fit is by press fit; you may need to sand the inner surface to hold the iPhone properly.
IMPORTANT:
You need to order the USB cradle separately.
http://www.shapeways.com/model/230215/iphone4_ruger___usb_cradle.html?gid=ug40945
http://gizmodo.com/#!5551267/irevolver
Please note that the model has been updated with a lot less material needed for printing (cheaper), and now incorporates a slot and space for an original iPhone USB cable, so you don't have to dismount the phone to charge/sync.
This iPhone case is designed to only fit the iPhone 4, and fit is by press fit; you may need to sand the inner surface to hold the iPhone properly.
IMPORTANT:
You need to order the USB cradle separately.
http://www.shapeways.com/model/230215/iphone4_ruger___usb_cradle.html?gid=ug40945
by
tedk727
iphone4 bumper snap fits. Protect your iphone with distinctive style. Thin profile minimizes extra volume on your iphone.
*Updated on 4/20/2011. Design has been modified for easy fit & release. Lock key is added.
*Updated on 4/20/2011. Design has been modified for easy fit & release. Lock key is added.
by
curvecreative
Headbuddy
Apple headphones are great. Stylish, iconic and there when you need them. But we like to run and our Apple headphones don't.
The Headbuddy is a simple and affordable solution that means you can use your existing Apple headphones in a more effective way while running.
Just loop your headphones into the Headbuddy and you're good to go. The earbuds are held securely in such a way that retains the sound quality. Also works with handsfree.
Suitable for nearly all size and shape heads. Available in a range of colors
Click here to visit our site
Or click here to keep up to date on Facebook
by
cinemo
This pencil and pen holder is made of first 500 digits of Pi (actually 546 exactly), the numbers are arranged along a spiral path. As you can see from the photos, the printing (Black Strong &Flexible) is very delicate and detailed. This desk accessory is both useful and decorative.
by
noesis
The CardCase is now customizable! See Below
The CardCase for the IPhone 4 does what other card carrying IPhone cases can do and then some!
The sleek, patent pending, snap-on case not only protects your IPhone, but can also replaces your wallet or current business card holder and the integrated card slot on the side allows you to use any available card as an instant stand in portrait or landscape mode! Perfect for watching movies on the go, Facetime chatting, or using your IPhone as an alarm clock!
The CardCase can comfortably hold 2 credit or ID cards, or 4-5 business cards, and works perfectly with either the AT&T or Verizon IPhone versions.
And the CardCase is now customizable! When ordering you can change the side text to anything you'd like up to 15 characters (company name, twitter username, real name etc.) you can also choose the text orientation and alignment.
Designed by Noesis Design Lab and manufactured by Shapeways, this durable nylon polyamide case has a unique look and grippy feel to help keep your IPhone (and cards) safe.
The case is shipped worldwide directly from Shapeways.
Available in a multitude of colors If you don't specify a color, the default is white
The CardCase for the IPhone 4 does what other card carrying IPhone cases can do and then some!
The sleek, patent pending, snap-on case not only protects your IPhone, but can also replaces your wallet or current business card holder and the integrated card slot on the side allows you to use any available card as an instant stand in portrait or landscape mode! Perfect for watching movies on the go, Facetime chatting, or using your IPhone as an alarm clock!
The CardCase can comfortably hold 2 credit or ID cards, or 4-5 business cards, and works perfectly with either the AT&T or Verizon IPhone versions.
And the CardCase is now customizable! When ordering you can change the side text to anything you'd like up to 15 characters (company name, twitter username, real name etc.) you can also choose the text orientation and alignment.
Designed by Noesis Design Lab and manufactured by Shapeways, this durable nylon polyamide case has a unique look and grippy feel to help keep your IPhone (and cards) safe.
The case is shipped worldwide directly from Shapeways.
Available in a multitude of colors If you don't specify a color, the default is white
by
solid_modeler
The first 3D Printed iPhone 5 Bumper designed to account for differences in outside temperatures that can make other 3D printed bumpers looser and tighter.
HeatLock is designed to be too small for your iPhone 5, which may sound strange, but is actually a revolutionary concept. As the bumper gets hotter, the plastic nylon it is made out of will expand, causing the bumper to get bigger. If the bumper starts too small for the phone, you could heat it up enough to get the case on, then as it cools it will fit perfectly.When your case arrives simply heat it up with a blow dryer or heat gun for a few seconds to expand the plastic. Slip the case on and allow a few minutes for it to cool off. The case should shrink down so that it is snug to your phone.
Prototyping is complete! Model will fit very snug on an iPhone 5 after heating!
Using your bumper:
1. Unpack from box
2. Heat corners of bumper
3. Stretch onto iPhone
4. Keep heating and stretching until bumper fits
5. Enjoy!
To undo case, reverse process. iPhone will not be damaged by added heat; however, Shapeways nor SolidWorks Tech Designs assumes responsibility for any damage done to your iPhone.
Heat Resistance Guide for Materials :
White Strong and Flexible or Colored : 176 Degrees F
White or Black Detail : 118.4 Degrees F
Frosted Plastics : 176 Degrees F
Updates :
10/14/2012 : Model complete. Anylasis inside SolidWorks with an iPhone 5 model confirms all sides overlap iPhone by about 1/30th of its width and height. Holes should align after heating and cooling. Model uploaded.
10/24/12: Model recieved, inaccuracies corrected. Overall size increases and hole location changes. Overall width increased. Ordered another prototype to test new changes.
11/13/12: 2nd Version received. Model is correct and will now work with a slight heat. Model price increased- no longer in prototype.
Please order this case if you are slightly interested and let me know how it turns out! Feel free to DM any messages or questions you may have about design. Stay tuned for future updates!
by
mu3d93
This is a fun gadget that you can have you in house to show your friends how the sphere was printed inside the rail and you can never detach it!
by
Mstyle183
This is an iphone 4/4s case
This is the cleaner and more sleek version of the all in one iphone case.. Main difference is that this one does not have a bottle opener. Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card holder, money clip, earphone organizer.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials..
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
This is the cleaner and more sleek version of the all in one iphone case.. Main difference is that this one does not have a bottle opener. Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card holder, money clip, earphone organizer.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials..
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
the bikini Wallet
by
COVO
Product Name "Ring of the gamer". Designed by Japan.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
by
onetruecathal
Update: Dremelfuge is now provisionally available in the "Strong and Flexible" material, after some basic testing. No guarantee of safety is given, as always. The "Strong & Flexible" material Dremelfuge creates more vibration in use, which may indicate less stability than the "Grey Robust" (ABS) material.
Caveat Emptor: As always, Dremelfuge is sold as an ornament, and any use as a tool is a risk entirely taken by the purchaser/user. I accept no responsibility for the safety of Dremelfuge.
DremelFuge is a centrifuge rotor for use with a rotary tool such as the popular "Dremel". As an Open-Source Hardware, DIYbio-inspired design it is intended to enable and inspire scientists world-wide.
At a rotary speed of 33,000rpm (the top speed for a standard Dremel 300), Dremelfuge can deliver up to 52,000g/rcf (1g = the force of Earth's gravity) on a sample in a standard 1.5ml microcentrifuge tube, measured halfway down the tube. This far exceeds the speeds typically used in lab protocols.
Dremelfuge can be used to collect bacteria, proteins, DNA or anything else suspended in a sample. Dremelfuge can be used to extract plasmids from cultures, to purify and cleanse DNA after enzymatic reactions, to remove precipitated impurities or for any other task calling for a powerful centrifuge.
It requires only the 5mm cutting tool holder that comes with the Dremel 300.
For safety reasons, Dremelfuge is sold as an ornament or curio; although demonstrated to be effective and reliable for routine lab tasks, use of Dremelfuge for any task other than as a decorative item is performed entirely at the risk of the buyer. It is suggested that all appropriate safety precautions be taken in such cases, including but not limited to eye protection.
The source files for Dremelfuge are hosted on Thingiverse here:
http://www.thingiverse.com/thing:1483
DremelFuge is a centrifuge rotor for use with a rotary tool such as the popular "Dremel". As an Open-Source Hardware, DIYbio-inspired design it is intended to enable and inspire scientists world-wide.
At a rotary speed of 33,000rpm (the top speed for a standard Dremel 300), Dremelfuge can deliver up to 52,000g/rcf (1g = the force of Earth's gravity) on a sample in a standard 1.5ml microcentrifuge tube, measured halfway down the tube. This far exceeds the speeds typically used in lab protocols.
Dremelfuge can be used to collect bacteria, proteins, DNA or anything else suspended in a sample. Dremelfuge can be used to extract plasmids from cultures, to purify and cleanse DNA after enzymatic reactions, to remove precipitated impurities or for any other task calling for a powerful centrifuge.
It requires only the 5mm cutting tool holder that comes with the Dremel 300.
For safety reasons, Dremelfuge is sold as an ornament or curio; although demonstrated to be effective and reliable for routine lab tasks, use of Dremelfuge for any task other than as a decorative item is performed entirely at the risk of the buyer. It is suggested that all appropriate safety precautions be taken in such cases, including but not limited to eye protection.
The source files for Dremelfuge are hosted on Thingiverse here:
http://www.thingiverse.com/thing:1483
by
jayfisher
A detailed full color model of each of the first six planets (out to Saturn) and major moons of the Solar system, to (logrithmic) scale.
(Note: the full Solar System set of planets and moons is available as a set here)
All surfaces are reproduced from NASA imaging.
For size reference, Jupiter is 22mm (0.9 inch) diameter, and Earth is 11mm (0.45 inch) diameter.
This set is designed for use in orrery or other models of the solar system, and so to best present all planets while preserving scale, the scale has been compressed - a logrithmic scale instead of a linear scale. This means that if the model of a moon of Jupiter is larger than the model of Mercury but smaller than Mars, then you know that the real moon really is larger than Mercury and smaller than Mars, But the size diference is compressed - Jupiter, which is really more than ten times Earth's diameter, becomes only twice Earth's diameter, etc. This logrithmic scale allows all planets to be clearly visible together, while at the same time still indicating their sizes relative to each other.
The set contains six planets, and nine moons:
[In order of appearance in the photo above, right to left]
Mercury
Venus
Earth
- Moon / Luna
Mars
Jupiter
- Ganymede
- Callisto
- Io
- Europa (attempt no landing there)
Saturn
- rings of Saturn
- Titan
- Rhea
- Iapetus
- Dione
All objects have a 1.3mm (0.05 inch) hole at the south pole, about 3mm deep, for a brass axle (or a toothpick).
What color is a planet - is it color of its surface materials, or the colour of its atmosphere from space, or the color of the surface being colored by the atmosphere filtering light from the sun? The appearance in this set attempts to be that of the surface with moderate atmospheric influence, (with the gas giants depicted as the atmosphere and surface being the same thing). For example, this means that Venus depicts the features of its surface, but they are tinted somewhat by its atmosphere. Similarly, Earth and Titan show ground features, but some areas are tinted and obscured by atmosphere.
In areas where the model surface is more detailed than the most detailed NASA photography, the overall surface appearance conforms to what is known, but finer textural details are speculative. (Or, if there is an atmosphere, it is shown as particularly thick and opaque over the unmapped area.)
Due to hard limitations of the Shapeways 3D printer, the moon Dione is using the surface map of Rhea. I chose Dione because the surface is very similar to Rhea, and it is the most minor moon in the set. The alternative was simply to remove an object, but I preferred the set to include four of Saturn moons, like it does for Jupiter.
(Note: the full Solar System set of planets and moons is available as a set here)
All surfaces are reproduced from NASA imaging.
For size reference, Jupiter is 22mm (0.9 inch) diameter, and Earth is 11mm (0.45 inch) diameter.
This set is designed for use in orrery or other models of the solar system, and so to best present all planets while preserving scale, the scale has been compressed - a logrithmic scale instead of a linear scale. This means that if the model of a moon of Jupiter is larger than the model of Mercury but smaller than Mars, then you know that the real moon really is larger than Mercury and smaller than Mars, But the size diference is compressed - Jupiter, which is really more than ten times Earth's diameter, becomes only twice Earth's diameter, etc. This logrithmic scale allows all planets to be clearly visible together, while at the same time still indicating their sizes relative to each other.
The set contains six planets, and nine moons:
[In order of appearance in the photo above, right to left]
Mercury
Venus
Earth
- Moon / Luna
Mars
Jupiter
- Ganymede
- Callisto
- Io
- Europa (attempt no landing there)
Saturn
- rings of Saturn
- Titan
- Rhea
- Iapetus
- Dione
All objects have a 1.3mm (0.05 inch) hole at the south pole, about 3mm deep, for a brass axle (or a toothpick).
What color is a planet - is it color of its surface materials, or the colour of its atmosphere from space, or the color of the surface being colored by the atmosphere filtering light from the sun? The appearance in this set attempts to be that of the surface with moderate atmospheric influence, (with the gas giants depicted as the atmosphere and surface being the same thing). For example, this means that Venus depicts the features of its surface, but they are tinted somewhat by its atmosphere. Similarly, Earth and Titan show ground features, but some areas are tinted and obscured by atmosphere.
In areas where the model surface is more detailed than the most detailed NASA photography, the overall surface appearance conforms to what is known, but finer textural details are speculative. (Or, if there is an atmosphere, it is shown as particularly thick and opaque over the unmapped area.)
Due to hard limitations of the Shapeways 3D printer, the moon Dione is using the surface map of Rhea. I chose Dione because the surface is very similar to Rhea, and it is the most minor moon in the set. The alternative was simply to remove an object, but I preferred the set to include four of Saturn moons, like it does for Jupiter.
by
MichielCornelissen
This version of PadFoot is compatible with iPad 1. For PadFoot for iPad 2, go here.
PadFoot is a viewing stand for iPad, designed to match the iPad's simplicity and elegance. Great for watching slideshows, clips and movies, as well as for (retail) displays and presentations. PadFoot gives your iPad about 11 degrees backward tilt and can be used in both portrait and landscape mode.
Strong as it is, PadFoot adds less than 15 (!) grams of weight to your bag.
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
Always make sure you use PadFoot on a stable and horizontal surface, and that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. Product ships in basic Shapeways packaging. For more information about my work, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot is one of fastcodesign’s most wanted products of 2010
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
PadFoot is a viewing stand for iPad, designed to match the iPad's simplicity and elegance. Great for watching slideshows, clips and movies, as well as for (retail) displays and presentations. PadFoot gives your iPad about 11 degrees backward tilt and can be used in both portrait and landscape mode.
Strong as it is, PadFoot adds less than 15 (!) grams of weight to your bag.
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
Always make sure you use PadFoot on a stable and horizontal surface, and that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. Product ships in basic Shapeways packaging. For more information about my work, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot is one of fastcodesign’s most wanted products of 2010
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
by
Whystler
Here is an attractive and educationally useful pendant for the scholar, astronomer, steampunk enthusiast, or the lover of the unique and celestial.
The tellurion is a model of how the earth and the moon move in space. You will see that the eath rotates freely on its axis, orbited by the moon. Orbit the whole thing around a candle or lightbulb, and you have a full feldged model of the earth, the moon and the sun.
There is some talk that if you spin the little moon on this pendant around the earth with the right conditions, that you can travel forward and back in time! ;)
ASSEMBLY REQUIRED:
If you want a challenge, order this piece inexpensively here on Shapeways, and assemble it yourself at home. Assembly is not complex, but it does require some careful dexterity and a little strength. Disclaimer: If you order this model here and assemble it yourself, Whystler is not responsible for any damage you may cause to it. If you assemble this piece with care and patience, then you will have a nice piece of jewelry.
Watch for the assembly video. In the meantime, check out the showcase video below!
The tellurion is a model of how the earth and the moon move in space. You will see that the eath rotates freely on its axis, orbited by the moon. Orbit the whole thing around a candle or lightbulb, and you have a full feldged model of the earth, the moon and the sun.
There is some talk that if you spin the little moon on this pendant around the earth with the right conditions, that you can travel forward and back in time! ;)
ASSEMBLY REQUIRED:
If you want a challenge, order this piece inexpensively here on Shapeways, and assemble it yourself at home. Assembly is not complex, but it does require some careful dexterity and a little strength. Disclaimer: If you order this model here and assemble it yourself, Whystler is not responsible for any damage you may cause to it. If you assemble this piece with care and patience, then you will have a nice piece of jewelry.
Watch for the assembly video. In the meantime, check out the showcase video below!
by
ArnaudCouturier
Put it with your keys on a key ring,
hang it on a chain / rope,
or lay it on a flat surface.
The hole for the chain / ring is 4.5 mm wide in diameter.
To be fair, in the renders, I simulated the printing lines you may have with steel, bronze and gold.
Original design.
----------------------
The price includes shipping + shipping taxes, but not local taxes that may apply in your country upon reception.
Please read the materials page, here on Shapeways, before choosing a material for this model.
Go to "create-> materials" at the top of this page.
hang it on a chain / rope,
or lay it on a flat surface.
The hole for the chain / ring is 4.5 mm wide in diameter.
To be fair, in the renders, I simulated the printing lines you may have with steel, bronze and gold.
Original design.
----------------------
The price includes shipping + shipping taxes, but not local taxes that may apply in your country upon reception.
Please read the materials page, here on Shapeways, before choosing a material for this model.
Go to "create-> materials" at the top of this page.
by
COVO
Product Name "Screwdriver Ring". Designed by Japan.
Available in either stainless steel (antique bronze & gold plated)
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
Available in either stainless steel (antique bronze & gold plated)
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
by
jes1111
This is the top part of the OpenPilot CopterControl case. You also need the bottom part and (optionally) the base.
More info here: http://wiki.openpilot.org/display/Doc/CopterControl+case
IMPORTANT NOTE: Due to some very slight dimensional differences, this case needs some minor modifications with a knife/file to fit the CC3D. A separate version is available for the CC3D.
More info here: http://wiki.openpilot.org/display/Doc/CopterControl+case
IMPORTANT NOTE: Due to some very slight dimensional differences, this case needs some minor modifications with a knife/file to fit the CC3D. A separate version is available for the CC3D.
by
COVO
Product Name "Brick Ring". Designed by Japan.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
The brick can be attached by all the sizes.
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
The brick can be attached by all the sizes.
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
by
joabaldwin
The bony skeletal structure of an origami paper crane. Created following the traditional crane model, for any lovers or the art of paper folding out there.
The detail is incredible, you can see textures and complex shapes even inside of the rib cage. The poor contorted crane has legs and feet, they are folded into its torso in true origami fashion. And vertebrae on the tail you say? What else did you expect?
The detail is incredible, you can see textures and complex shapes even inside of the rib cage. The poor contorted crane has legs and feet, they are folded into its torso in true origami fashion. And vertebrae on the tail you say? What else did you expect?
by
virtox
A pair of dangly Triple Matrix earrings.
A mesmerizing shape, composed of three growing, interlocked but still movable matrices.
Nearly impossible to create without 3d printing.
When you order, you will get a pair of these earrings complete with silver hooks, courtesy of Shapeways!
More earrings
A mesmerizing shape, composed of three growing, interlocked but still movable matrices.
Nearly impossible to create without 3d printing.
When you order, you will get a pair of these earrings complete with silver hooks, courtesy of Shapeways!
More earrings
by
curvecreative
Nanolet
Everyone's wearing their Nano on their wrist nowadays, now you can wear it on a one part 3D printed nano bracelet.
The NANOLET simply wraps around your wrist and fits snugly up to your hand which is perfect for running and everyday use. An alternative to the plethora of nano watches that are around now.
Suitable for large sized wrists. Available in a range of colors
Large is for a wrist of circumference 185mm - 205mm. The best way to measure your wrist is to wrap a piece of string around your wrist, mark it and then measure it. More sizes coming soon.
Click here for all sizes
Click here to visit our site
Or click here to keep up to date on Facebook
