My 3D printed small mesh purse (3.8 x 5.3 x 1.8 inches, closed) featuring a sturdy, flexible mesh design and a recloseable clasp. See my larger Medium Mesh Purse. Two sizes of carrying straps are available separately: 45-inch chain strap, or 36-inch chain strap.
View more 3D printed bags and purses here: VertigoPolka - Bags and Purses.
Due to size limitations, colors are no longer an option for this product. :(

---

Want to get a set

(small purse and 36-inch strap)?

+

---

Want to get a set

(small purse and 45-inch strap)??

+

---

The molar teeth-shaped Brush'eM ! Kids is a funny toothbrush-holder with holes, which in it's own little way might contribute to the dental care awareness of kids.

This work is copyright © Novastar Design, Netherlands, 2011-2012. All rights reserved.

DNA double helix, for use in a keychain, to be used in complement to the moebius DNA pendant and bracelet. Check out my shop for more.

DJI Phantom Landing Gear Kit, includes the Leg Mounts, Compass Mount and 4 Leg Ends.

These mounts fit directly to your Phantom, using the stock screws, and replace your stock landing gear. You provide your own 6mm tubing (preferably carbon fibre or aluminium), cut to the desired length, to give you the height you want, in order to allow for dampening set ups/gimbals/bigger cameras and so on. I have found 5" tube to be an ideal length for my set up, with gimbal and GoPro.

Please note, that the tubing is not included in the listing, they are to show what the assembled kit looks like on the leg extensions. The kit includes 4 Leg Mounts, 1 Compass Mount and 4 Leg Ends.

These are a beefed up version of the previous Leg Mounts I made, and use in the video, showing how I made the set up on my Phantom.

Updated, so tubing can be pushed into the holes (which are slightly cones), and secured with a 3mm fixing screw (not included). The mounts are directional, like your props. see pictures above for reference or check out this video of how I assembled mine http://vimeo.com/simensays/phantom

This is a simple DIY mod that replaces the stock landing gear, allowing you to easily make your Phantom taller, more stable, save weight (depending on how long you want your legs and what type of tubing you use) and a better overall look and stance. Only basic tools are needed. I am setting up a blog on my website, where I will post info, videos etc on other mods I have done to my quad, including how to make the leg extensions. www.simensays.com

Beware to mount your Compass correctly, to maintain optimal flight characteristics on your Phantom. It should be mounted perpendicular to the body, in a vertical position. The included compass Mounts makes this very easy when using these legs. I use velcro on to fasten my compass.

This iphone 5 case Contains the Following:
Tank Iphone 5 Case (stronger case that protects most of the phone)
Card Holder 2 Credit Cards and 1 ID (wallet)
Money Clip
Bottle Opener Opening

It does not contain:
metal bottle opener Attachment
Earphone Organizer
Build in Kick stand


** metal piece for the bottle opener has been created but it will only be available for purchase for those who have purchased my case. You will need to provide the order number by email for verification purposes.

Go to http://www.amznfx.com/shopping-cart/
**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
 the bikini Wallet

*** I made a quick video that shows how to put on and take off my cases. Also i have gotten some complains that depending on the printer, material or color material the kickstand comes stuck and it doesnt seem to work. So i made a quick video that shows how to loosen the support material on the hinges or sides using an exacto knife or safety pin so please watch this instructional video http://youtu.be/gfImxHyhfi0

Inspired by stone age weaponry, this arrow tip is an archetype charm that gives it's wearer strength and power to withstand the challenges of our everyday lifes.
Antique Bronze Matte, Stainless Steel or Gold Plated Matte are our personal favorites, as they emphasize the design with an authentic look and feel.
We recommend using a leather or rubber necklace. (Diameter of the hole is 4 mm, so any necklace of your choice should fit)
Also designed to be used as a key fob.

Dock-it for iPhone 5

Dock your iPhone 5 and give it a spot on your desk, table or nightstand!
Dock-it holds, syncs and charges your iPhone 5 to prepare it for your next journey.

Dock-it makes use of your new Apple Lightning Connector to USB cable. Simply snap it in and lock it with the Dock-it tray (separately available and included when you order the set: dock + tray)

ATTENTION: The Dock-it tray is needed for this product and available here:
Dock-it tray
When you order your Dock-it for the first time, then always order the set: dock + tray.

Dock-it is usable vertical and horizontal so you can do FaceTime and watch video’s with ease. The design has special airtunnels inside to amplify the phones speaker and makes sure you have good access to your phones microphone.

The Apple Lightning to USB cable is not included, it works with the one that came with your phone. You can also buy an extra one to use it specially with Dock-it.


Dock-it is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. It might be wise to clear the airtunnels with compressed air to operate optimal for speaker & mic access. For further information & support contact the Shapeways customer service.

Buy the set: dock + tray

+

---

First figure of my original character Cpt. Kraken. Set in a spoof world of video games, this first statue in a series visits Mario's mushroom kingdom!

Every Team Fortress 2 Engineers must have tool; the Sentry Gun!

Been busy taking out enemies? Time to upgrade your sentry then to the it's most powerful state; Level 3!

This model contains parts needed to build the "level 3" sentry gun. You will also either need to have already purchased the parts for "level 1" and "level 2" or purchase them along with these parts before you can build the level 3 gun. Once assembled with the previous levels, the model will be approximately 9.5cm x 11cm x 9.5cm from it's longest points.

Links to the level 1 and 2 parts can be found below.

Level 1
Level 2

The YouTube video linked demonstrates the assembly of all levels along with some additional information.

Please also consider visiting my website: www.psychobob.co.uk

PLEASE NOTE:
- This item does not come pre-painted.
- For "level 2", you need to purchase the parts for "level 1". For "level 3", you will need to purchase the parts for "level 1" and "level 2".

DISCLAIMER:
This is intended as a desktop model and not as a toy for children. There are small parts that can be snapped off and potentially swallowed, so please do not buy this with the intention of giving it to a young child as a toy.

My latest invention.. Earbud adapters for the earpods from apple.. For those that run hard and work hard.. These will help you keep your earbuds in place..
These tiny attachments use the curves in your ears to help you keep the earpods in place even when they are being pulled. These add instant value to your earphones and fixes the only flaw i see with apple's earpods.

** these also work with older ear buds provided by apple Check out my other products at shapeways.com/shops/amznfx

Simensays Foldable Landing Gear Kit for the DJI Phantom. A smart, modular design that can be folded up in seconds without the need for any tools, any length for the leg extensions (height of the Phantom) for the gimbal of choose or any additional fear you might be mounting.

Easy to assemble and light weight (the parts in the kit weighs 33 grams), yet strong and very stable. Check out this assembly video for how to put it all together. This kit includes the white parts you see in the pictures, and you provide the carbon fibre tubing yourself (list & links below). I recommend making a small 2.5mm hole on each side of the battery trey, as seen in the video, to mount the 3rd screw, that secures a strong mount for the landing gear. Tap out the hole, using a 3mm screw before mounting it all. I also used a M3 lock nut on the inside for optimal strength.

Parts needed

2x M4 Screws, length 35-40mm Hexagonal Head Screw
2x M4 Wing Nut
9x M3 Screws, for fixing legs etc

A small bit of Velcro to secure compass to mount
1 Q-tip for antenna arm

Carbon Tubes

Most finer hobby shops have carbon fibre tube in these dimensions. I ordered the carbon fibre tubing from eBay (links below):

6mm Carbon Fibre Tube (for skids).
12mm Carbon Fibre Tube (for leg extensions)

Materials

I recommend White Strong & Flexible Polished. To make the parts stay clean and a fresh white, I recommend spray them with a coat of white paint. I used cheap automotive spray can, and it looks great.

Videos of more mods to my Phantom

Check out my website www.simensays.com for more pics & videos of mods I have made to my Phantom.

Disclaimer

This is a DIY kit, so some minor adjustments might be needed.