Do you hate going to receptions and handing out bent business cards? Have you ever wanted to get a case for your cards but didn't like the same old style with a lid you had to open?

Meet the Card Carrier 2.0. Its legendary design not only holds up to 10 standard business cards while maintaining elegant aesthetics, but it also automatically dispenses a single card at the flick of a thumb! What could be better? Oh I know! Maybe the fact that it is also a template on the Shapeways Co-Creator platform!

With Shapeways Co-Creator you are able to download the PDF or JPG version of the template, Print it out, draw all over it, then upload back to this model for a 100% custom design. Actually, you don't even have to use a printer if you have MS Paint, Gimp or another free drawing software. Just download and digitally draw on the template however you want!

This would make a great gift for that special business person in your life! (Standard card size 2"x3.5")(It is recommended that this product be printed in WSF.)

PDF Download: http://jakedrews.webs.com/Shapeways%20Files/DRAWITCC2.pdf

JPG Download: http://jakedrews.webs.com/Shapeways%20Files/DRAWITCC2.JPG

Bugle for iPhone 5

AVAILABLE NOW!

Enjoy your music louder with the Bugle

The Bugle is a natural acoustic amplifier for your iPhone that fits snuggly over the speaker, acts as a stand and makes your music sound better and louder. The Bugle is curved to provide a natural flex that assures a snug fit on your iPhone.

A great solution for bringing anywhere and requires no batteries. Just chuck it in your bag and use it for music at the park, for watching a film, or for sharing a youtube video

Available for iPhone 4 / 4S here

 how to assemble this Cube:

Batarang Bottle Opener

Penholder for any Moleskine type notebook and sketchbook. Clips on the backside, behind the binding. For pens and pencils BETWEEN 8 AND 10 MM DIAMETER.

Hi guys while trying to model an android case similar to my iphone case i came out with a cool little wallet that can hold you up till i get the android case done.. This ultra Slim and minimalistic case is waterproof, sweat proof, small, portable, has a money clip, a working bottle opener, and holds 2 credit cards and 1 I.D. If you want to incorporate this to your existing phone case// all you need is a flat back and some strong double sided tape This Wallet is perfect to minimalistic people that need to carry as little as possible. This is a perfect wallet for cyclist and runners since it's only a bit bigger than .25 inches including credit cards. This is like the carbon fiber version of a wallet for all of your minimalistic needs.

** metal piece for the bottle opener has been created but it will only be available for purchase for those who have purchase my case. You will need to provide the order number by email for verification purposes.

Go to http://www.amznfx.com/shopping-cart/

This 5 cm nylon skeleton toy is an ideal gadget for Halloween or your keyboard's companion. Funny, tricky and cool

These are two knots linked together. The two knots turn though eachother in a gearing motion in a 2x3 ratio.

Watch the YouTube video

REMOTE DOCK

A tiny and elegant dock to store the beautifully designed Apple Remote.

The Apple Remote is a very nice product. It looks stunning and it is wonderfully designed & engineered. I found it a pity that my remote always was lying flat on my desk and that I had no elegant solution to store it. Since Apple is not offering a dock for this product I decided to design one myself and make it available to you.

The Remote dock is available in black & white to fit perfectly with your Mac and/or Apple TV.

This dock allows you to show your elegant remote.


Remote dock is manufactured by innovative 3D-printing in tough but lightweight polyamide. The surface has a fine texture. The product will be shipped in basic Shapeways packaging. Some powder residue from the 3D-printing process may be found on the product itself; if this is the case, it should be easy to clean off with small tooth sticks & brushes. For further information & support contact the Shapeways customer service.

The ''ShapeTool'' Multitool is a practical keychain accessory, useful for everyday tasks such as letter/cardboard box opening, cutting, scraping, screwing or puncturing.
''Shapetool'' specifications:
           
Length: 7,9 cm / Height: 2,1 cm / Width: 0,35 cm / Blade Length: 3,6 cm / Weight: 23gr

Available in several finishes and materials (Stainless Steel, Antique Bronze Matte, Antique Bronze Glossy, Gold Plated Matte, Gold Plated Glossy, Silver and Silver Glossy). Please choose from the right.

For safety reasons when carried in a pocket, a protective sheath is recommended and available here.

Note: The item you order may require cleaning of extra support material, polishing and sharpening. The item will be shipped unsharpened and the bladed side can be used as a scraper.

DJI Phantom Landing Gear Kit, includes the Leg Mounts, Compass Mount and 4 Leg Ends.

These mounts fit directly to your Phantom, using the stock screws, and replace your stock landing gear. You provide your own 6mm tubing (preferably carbon fibre or aluminium), cut to the desired length, to give you the height you want, in order to allow for dampening set ups/gimbals/bigger cameras and so on. I have found 5" tube to be an ideal length for my set up, with gimbal and GoPro.

Please note, that the tubing is not included in the listing, they are to show what the assembled kit looks like on the leg extensions. The kit includes 4 Leg Mounts, 1 Compass Mount and 4 Leg Ends.

These are a beefed up version of the previous Leg Mounts I made, and use in the video, showing how I made the set up on my Phantom.

Updated, so tubing can be pushed into the holes (which are slightly cones), and secured with a 3mm fixing screw (not included). The mounts are directional, like your props. see pictures above for reference or check out this video of how I assembled mine http://vimeo.com/simensays/phantom

This is a simple DIY mod that replaces the stock landing gear, allowing you to easily make your Phantom taller, more stable, save weight (depending on how long you want your legs and what type of tubing you use) and a better overall look and stance. Only basic tools are needed. I am setting up a blog on my website, where I will post info, videos etc on other mods I have done to my quad, including how to make the leg extensions. www.simensays.com

Beware to mount your Compass correctly, to maintain optimal flight characteristics on your Phantom. It should be mounted perpendicular to the body, in a vertical position. The included compass Mounts makes this very easy when using these legs. I use velcro on to fasten my compass.

What makes this bumper incredible? - you might ask.
It is thin. Incredibly thin. We use less than 1 millimeter of polyamide to cover the iPhone's antenna system - the thickest part of this bumper measures 0.7 millimeters. This allows to plug in the 30 pin "dock"-connector without removing the bumper. Aditionally, there is a tiny rim around the glass sections of the iPhone to avoid contact of the glass with a surface the iPhone is put on.
The Strong & Flexible material from shapeways is so durable that this thin layer will keep your iPhone completely safe when dropped.
In contrast to other iPhone-cases, this bumper emphasizes the elegant design of the iPhone 4 instead of concealing or disturbing it.
The incredible bumper was designed following Apple's strict guidelines for iPhone cases - this assures a precise and tight fit and unconstrained functionality.
In everyday use, the incredible bumper almost feels like it isn't there - but when your iPhone needs to be protected, it is.
The Strong & Flexible material is dishwasher-safe. If your bumper gets a little dirty over time just put it in your dishwasher and it will look like new!

We recommend the white polished material, as it has a really nice surface.
iPhone 4 CDMA and iPhone 4S bumpers coming soon!

This is a very small RBS. The ball was supposed to be attached to the top and to the side but the stick that attached it was so small it disappeared with printing. The rest of the sculpture arrived OK. I found the ball rolling around the bottom of the box. Hey, it works, though! Yea! See the video! http://www.youtube.com/watch?v=KGdUFg_X8mE

Reduced price on WSF!

---

Display your crayons loud and proud. Don't throw them in a dingy box, stick them in the Porcupine Crayon Holder. Great for kids, art students, and anyone who likes crayons and is proud of it.

Puzzle Case will set your iPhone apart from all the rest. Order this one-of-a-kind design with your choice of color for the top and bottom pieces. This is the top piece. Be sure to also order at least one Puzzle Case Bottom piece. http://www.shapeways.com/model/362223/puzzle_case_bottom.html

This fully articulated and anatomically correct wolf spider model can be posed in a variety of positions. Now you can have a specimen collection without harming live animals! Please have a look at the other designs in my shop!

*The default material is frosted ultra detail plastic. The model is also available in strong+flexible plastic, but the joints aren't guaranteed to move in this option.

This one was very difficult to achieve. It is composed of 12 independent and entangled parts.

A plate which can be attached to your keychain with a braille message. The text can contain up to 22 characters.

The Marble Cage is a cage to turn a 7/8" marble into a keychain.
The cage is to be closed with a keyring.
Unfortunately, due to moving parts, this model cannot be printed in Metal anymore.

Read this post for more information
A new version is also available.

Marble, keyring or necklace not included.

PadFoot is the popular viewing stand for iPad 2, iPad 3 and iPad 4; for more information, go here.

Buy a wholesale pack of 4 PadFoots at up to 30% lower prices from this page. Product is shipped in basic Shapeways packaging.

Headphone Jack Accessory.
Fits in the 3.5mm headphone jack.

Dress up and prettify your iPods, smartphones, and music players.

It prevents dirt from getting into the earphone jack.

My latest invention.. Earbud adapters for the earpods from apple.. For those that run hard and work hard.. These will help you keep your earbuds in place..
These tiny attachments use the curves in your ears to help you keep the earpods in place even when they are being pulled. These add instant value to your earphones and fixes the only flaw i see with apple's earpods.

** these also work with older ear buds provided by apple Check out my other products at shapeways.com/shops/amznfx

Multitools seem to be following a trend of getting progressively larger and more complex. The Head Turner, on the other hand, is simple and down-to-earth. The name says it all: this tool is made to turn heads— bolts or otherwise. Tools: 5mm wide Phillips screwdriver, 5mm wide flathead screwdriver, 5mm Allen key, 4mm Allen key, 10mm wrench.

Works for many doors. Key reads "13" in roman numerals on the 666 side & "7" when flipped to 777 side (via roman numeral subtratcion). Needle not included (too thin to reliably print). Has a small hole in end to accept needle or pin to complete the piece. Hole will vary with material choice & may need to be opened with small drill.