This is a shawm, the loud medieval ancestor of the oboe. This shawm is about the same size as a tenor recorder.

You will need to make a drinking straw reed, from a straw of 4 - 5mm diameter. This is quite easy, here are instructions.

Use blue teflon plumber's tape to make a tight seal between the two segments.

Fingering chart and further information.

A trombone mouthpiece loosely based of a blessing 12c. May play very well or or not at all, it is very experimental.

This is a soprano flute with a fingering system similar to the penny-whistle. The tapered bore produces a mellow tone.

I had Shapeways make this model from "strong & flexible" material, and it worked perfectly right out of the box.

The software I wrote to design this is available as Python package "demakein": http://www.logarithmic.net/pfh/design

A hybrid between the Native American style flute and a recorder (two chambered, fipple flute without block) decorated when printed in Full Color Sandstone with an image of hands decorated with henna patterns. Six holed flute accurately tuned to the minor pentatonic scale with a high C5 fundamental note. Gets two upper octave notes. Color materials are water reactive! Exposure to moisture from breath will cause the material to dissolve, first ruining the color, then compromising structural integrity. Seal with water-resistant finish if you wish for this to be more than decorative.

12 pipe panflute tuned to the "Mojave" scale (Natural minor, Melodic Minor (Descending) Scale: semitones 2-1-2-2-1-2). The low note is D4 (whole step above middle C on a piano). The panpipes are around 11 inches in length from top to bottom of the longest pipe. Decorated (Full Color Sandstone) with an image of the Milky Way Galaxy. Color materials are water reactive! Seal with water-resistant finish (e.g., shellac, polyurethane) if you wish for this to be more than decorative. The pipes are tuned to the indicated scale, and thus can be played. Videos and sound of 3D printed panflutes: Anasazi tuned http://www.youtube.com/watch?v=wNz78ZM1tfE Japanese Hirajoshi Tuned http://www.youtube.com/watch?v=2LCpC1lw8GY Middle Eastern Hijaz-Kar tuned: http://www.youtube.com/watch?v=tFm-DoOzQbs Minor Pentatonic: http://www.youtube.com/watch?v=90q_jPz8zIU

12 pipe panflute tuned to the "Mojave" scale (Natural minor, Melodic Minor (Descending) Scale: semitones 2-1-2-2-1-2). The low note is D4 (whole step above middle C on a piano). The panpipes are around 11 inches in length from top to bottom of the longest pipe. Color materials are water reactive! Seal with water-resistant finish (e.g., shellac, polyurethane) if you wish for this to be more than decorative. The pipes are tuned to the indicated scale, and thus can be played. Videos and sound of 3D printed panflutes: Anasazi tuned http://www.youtube.com/watch?v=wNz78ZM1tfE Japanese Hirajoshi Tuned http://www.youtube.com/watch?v=2LCpC1lw8GY Middle Eastern Hijaz-Kar tuned: http://www.youtube.com/watch?v=tFm-DoOzQbs Minor Pentatonic: http://www.youtube.com/watch?v=90q_jPz8zIU

The Thumb Rail is a long thumb rest for a bass guitar that runs the length of the right hand playing surface (neck to near bridge) allowing for an endless amount of tone variation with a comfortable and familiar hand position. This eliminates the tone-limiting "thumb on the pickup" locations or hand stretching to get where you want to be to get the right tone and attack. Just play. Secures at standard pick guard screw locations using your existing screws, making it an easily reversible update to your bass. This unit is designed specifically for the Fender Geddy Lee Artist Series Jazz Bass and assumes the use of a pickguard (notice the indent on the back to accommodate the height change between the pickups). It may fit others, but has only been tested on the Geddy Lee model. Other Thumb Rail versions are being developed specific to other model basses as well. Be sure to check the whole store. Note, due to the length of the rail, this is only available in NON-polished black and white "Strong & Flexible" and "Alumide". Due to that, it has a textured surface. This ads some grip which keeps your thumb in place nicely. If you prefer a smooth surface, we are working on two-piece models that will allow for "Polished Strong & Flexible" material use...including colors. Also note, there has been three modifications to the design since this product photo was taken. The string side has been rounded just like the top side to eliminate your fingers hitting what was the cornered edge. Also, the neck-side screw hole has been lowered for the same reason. Lastly, to provide tactile thumb positioning indicators, indexing marks have been added on the top-side at the neck end, and over each of the front side of the pickups.

The original Rock Band guitars didn't have a ring around the Start button, making it very easy to accidentally halt game play by bumping the button. Later version of the guitar came with a ring around that button to prevent this. This model has six small rings that can be super-glued around the start button to provide this benefit. Because it's such a small piece, I included six of them in the model to split the shipping and handling across a larger number of them.

Custom neck pickup ring for a Les Paul (or similar). Fitting a humbucker sized route but cut-out made for mini-humbucker.

D4 (lowest note) Panpipes in the minor pentatonic scale (9 pipes). Decorated (Full Color Sandstone) with an image of a Native American art. Color materials are water reactive! Seal with water-resistant finish (e.g., shellac, polyurethane) if you wish for this to be more than decorative. The pipes are tuned to the indicated scale, and thus can be played.