by
xxdaggerxx
A BlackBerry 9000 case inspired by the Human Fingerprint.
Case has been tested for everyday use and holds up nicely.
Looks best in WSF Polished.
Pieces fit together securely and can be removed with out much hassle.
All Ports and buttons are accessible.
*This item on sale does not come with the name "Aaron" on the back.
by
swirlingbrain
I've attached a ball to the rolling ball sculpture with the idea that you cut it off and sand it and it should work as the marble. The marble is 5/8 inch so it should work with regular glass or wooden marbles too. Yea it works! See the video!
by
WelshDesigns
This is a cookie cutter, it can also be used for clay or Play-Doh.
by
aeron203
This bottle opener is styled convincingly like an old key. This can be worn on a lanyard, belt or wallet chain, but at four inches long, it may not blend-in well on your key chain.
by
lab02
The Lightcip is an ambient light accessory for your iPhone. Just slide it over your iPhone, and use any of the free flashlight apps.
The Lightclip was designed specifically for 3D printing in White Strong and Flexible. This material is very strong (obviously), affordable and an excellent light diffuser. The Lightclip emits a beautiful ambient light, which is evenly distributed and very easy on the eyes. Use it as a nightlight, at a camping trip or when in need of a superhero!
Please note that colors other than white block quite a bit of the light, but look amazing in a dark room and the Bat Signal is extremely bright!
Enjoy!
The Lightclip was designed specifically for 3D printing in White Strong and Flexible. This material is very strong (obviously), affordable and an excellent light diffuser. The Lightclip emits a beautiful ambient light, which is evenly distributed and very easy on the eyes. Use it as a nightlight, at a camping trip or when in need of a superhero!
Please note that colors other than white block quite a bit of the light, but look amazing in a dark room and the Bat Signal is extremely bright!
Enjoy!
by
SaGaDesign
The first of a series of fitness-inspired accessories from SaGa Design.
It is inspired by the Finnish concept of "Sisu", which roughly translates as "determination" or "grit". The design appears to defy gravity, with the human figure being much smaller than the device he is supporting.
Through this seemingly intense struggle, the device is forced upright and the design symbolizes the infinite determination each of us is capable of summoning to overcome hardship.
by
Magic
The Ring'n'Roll is made of two portions of spheres, one inside the other. The outer ring can turn freely around the inner one.
The internal diameter is 20 mm (ask me if you need other dimensions). The inner ring can turn inside the outer shell (the clearance between the ring is 0.75mm, the thickness of each ring is 2 mm)
SUCESSFULLY PRINTED in Alumide. Unfortunatelly Metal is not possible (movable parts). A version with holes (less expensive) is also available.
Very very addictive...
The internal diameter is 20 mm (ask me if you need other dimensions). The inner ring can turn inside the outer shell (the clearance between the ring is 0.75mm, the thickness of each ring is 2 mm)
SUCESSFULLY PRINTED in Alumide. Unfortunatelly Metal is not possible (movable parts). A version with holes (less expensive) is also available.
Very very addictive...
by
kspaho
Me metodat me të fundit së prodhimit dixhital, ju sjell pran jush një (iphone case) për të mbrojtur celularin tuaj. Metoda a prodhimit quhet (3d-printing) për të cilën mund të shihni një vidio to shkurtër duke klikuar linkun e poshtëm:
http://www.youtube.com/watch?feature=player_detailpage&v=wD9-QEo-qDk
Shëmbulli i sipërm ësht prodhuar duke përdorur materialin plastik që quhet (white strong and flexible polished) i cili ësht tepër i lëmuar. Produkti mund të prodhohet me ngjyra të tjera që mund ti zgjithni tek (select materials) në të djathte të faqes.
Në qoftë se ini të interesuar në ky produkt, mund ta blini direkt në këtë website. Prodhimi filllon me një herë mbas blerjes dhe vjen me postë kudo qe te ndodheni në botë, për 15-25 dite (varet ku banoni)
Faleminderit per interesin tuaj, dhe ta gezoni!
by
purligar
iPhone 4 bike mount for 1 1/4" bars provides unparalleled protection from bumps, impacts and drops, while also delivering a very high degree of dust, liquid and water resistance.
Update: iPhone 4S owners, please use iPhone 4S bike mount 1 1/4"
Inside the cover frame there is place to insert a 0.3-0.5mm PVC foil as water protection. The touch display will still work through this foil.
Please note: the cover is not neccessary needed. This part is optional for more protection. Video at: http://www.youtube.com/watch?v=AHDGJ_1NVUk
If you have a 1" bar (24-26mm) please use: iPhone bike mount for 1" bar
All necessary parts except PVC foil are included in this assembly.
Bike mount an case has been tested for everyday use and holds up nicely. Pieces fit together securely and can be removed with out much hassle. All Ports and buttons are accessible.
This assembly includes the following uploads:
1 1/4inch bike mount
iPhone 4 bike mount (cover)
iPhone 4 bike mount (case)
Update: iPhone 4S owners, please use iPhone 4S bike mount 1 1/4"
Inside the cover frame there is place to insert a 0.3-0.5mm PVC foil as water protection. The touch display will still work through this foil.
Please note: the cover is not neccessary needed. This part is optional for more protection. Video at: http://www.youtube.com/watch?v=AHDGJ_1NVUk
If you have a 1" bar (24-26mm) please use: iPhone bike mount for 1" bar
All necessary parts except PVC foil are included in this assembly.
Bike mount an case has been tested for everyday use and holds up nicely. Pieces fit together securely and can be removed with out much hassle. All Ports and buttons are accessible.
This assembly includes the following uploads:
1 1/4inch bike mount
iPhone 4 bike mount (cover)
iPhone 4 bike mount (case)
