by
SamAbbott
IPhone 5 Cover that was designed in hell! All the hallmarks of something evil, 666, goats skulls, pentagrams the message of Ave Satani (Hail Satan) and much more.
by
MichielCornelissen
This is a wholesale offer of 8 units of the US version of The Wrap, a handy cable organiser accessory for the iPhone charger, at reduced prices. Note that these products are shipped in basic Shapeways packaging. For more information on The Wrap, go here.
This version works with iPhone chargers and cables up to those of iPhone 4 and 4S. There is no version of The Wrap available for iPhone 5.
This version works with iPhone chargers and cables up to those of iPhone 4 and 4S. There is no version of The Wrap available for iPhone 5.
by
WelshDesigns
EA6B Jet Aircraft shaped cookie cutter. Also can be used on clay or Play-Doh.
by
EasyAs314159
A simple tripod mount for the iPhone 4 and 4S. Requires a single 1/4-20 Hex nut fitted into the base which you can easily obtain at your local hardware store. Due to manufacturing tolerances the fit can be somewhat tight. I have confirmed that the strong and flexible material will not leave any marks on the iPhone glass.
by
barbecuesteve
A version of the Magsafe Clip that allows you to tether the clip with a string or rubber band rather than clipping it to the cord.
The adapter is designed for a VERY snug fit. In fact, when you insert the adapter into the clip, you will remove a small amount of material from the inside corners of the clip. It will take some work and patience to get the adapter into the clip. But once it's in, it will be very snug, and should hold for a lifetime of usage.
by
Oskar_van_Deventer
Gerardo's Cube is a Rubik's Cube without edges. The suggestor and name giver of this puzzle is an active contributor to the Twisty Puzzles Forum. He uses this puzzle as his avatar. It used to be a conceptual puzzle. Now it is real.
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
Please contact Oskar directly if you are interested in obtaining a fully colored, stickered and assembled sample of this puzzle.
by
sfugleberg@verizon.net
This is a Live-View hood for the Canon 5D MKII. It snaps together and uses a loupe purchased at Harbor Freight (not included). This item is just the hood bellow, two other printed pieces shown in the shop are required. Use the Live-View hood to video in bright light, review photos, and/or adjust settings. Camera and Tripod shown in the photo are not included.
by
aeron203
This model turbine is not a replica of any particular engine design, but is largely inspired by those in early Russian MIG aircraft.
by
sidnaique
Ball Maze iPhone Case
Low battery ? dying of boredom but can’t play games on your iPhone ? Well there is something interesting at the back of your phone… A Dual Ball-Maze Game !!!
This iPhone Case has a dual ball-maze game and both are connected so that the balls can travel from one maze to another … long lasting fun! You will get three plastic balls with this case but metal balls are HIGHLY RECOMMENDED. You can use bearing balls.
The balls never fall out from the maze. To add or to remove the balls, simply remove your phone from the case and you will see two holes on the inside of the case. Just drop the balls in the hole and place your phone back in the case. This will keep the balls locked inside the maze.
The case grabs all four corners and the belly of your phone. The gap in between these claws keeps the lateral keys from being scratched while you push your phone in.
more iPhone Cases
by
{DF}
Voronoi bracelet #1 (MEDIUM)
Inspired by the use of Voronoi diagrams in a large number of fields ranging from Astronomy to Zoology, we created various artifacts featuring complex voronoi structures.
Voronoi diagrams have been used by anthropologists to describe regions of influence of different cultures; by crystallographers to explain the structure of certain crystals and metals; by ecologists to study competition between plants; and by economists to model markets in the U.S. economy. [David Austin, Grand Valley State University]
In mathematics, a Voronoi diagram is a special kind of decomposition of a metric space, determined by distances to a specified family of objects (subsets) in the space. [Wikipedia]
Design
Internal diameter is 52 mm. The Strong & Flexible material that is provided by Shapeways is flexible enough to fit almost any medium wrist.
Also available in LARGE size.
The best way to measure your wrist is to wrap a piece of string around your wrist, mark it and then measure its diameter. Please contact for a custom size.
Materials
Recommended material for purchase: Strong & Flexible (any color).
Make sure that you check under 'Select Material' for currently available color options.
Click here to see more Jewelry >>
Inspired by the use of Voronoi diagrams in a large number of fields ranging from Astronomy to Zoology, we created various artifacts featuring complex voronoi structures.
Voronoi diagrams have been used by anthropologists to describe regions of influence of different cultures; by crystallographers to explain the structure of certain crystals and metals; by ecologists to study competition between plants; and by economists to model markets in the U.S. economy. [David Austin, Grand Valley State University]
In mathematics, a Voronoi diagram is a special kind of decomposition of a metric space, determined by distances to a specified family of objects (subsets) in the space. [Wikipedia]
Design
Internal diameter is 52 mm. The Strong & Flexible material that is provided by Shapeways is flexible enough to fit almost any medium wrist.
Also available in LARGE size.
The best way to measure your wrist is to wrap a piece of string around your wrist, mark it and then measure its diameter. Please contact for a custom size.
Materials
Recommended material for purchase: Strong & Flexible (any color).
Make sure that you check under 'Select Material' for currently available color options.
Click here to see more Jewelry >>
by
byShapeways
This is replacement for your standard gear indicator. You can personalize the interior of your car by change the look of your gear shifter. It’s on a very central spot inside the car and will have a nice shine RVS look. You can decide what people will look at by simply uploading a picture.
by
maikelsdesign
DJI Phantom wide Landing gear & parallel Battery mount Upgrade-kit.
Give your DJI Phantom a custom look with this beautiful landing gear and upgrade your in flight battery capacity with the integrated battery mount, which allows you to mount two (standard size and larger size) batteries in a parallel setup for longer flight times.
Depending on your Phantom (Naza-M) voltage settings you can get 12 to 20 minutes of flight-time in parallel setup.
If you are using or want to use a small gimbal or camera see also the slim version of the landing gear Upgrade-kit.
Main Features:
Lighter and nicer landing gear
Parallel battery mounting
Suitable for use with a small, medium and large gimbal
Sturdy feet
Custom leg hight
See video and photos for an impression and building instructions.
Includes:
2 - 9,5 gram landing gear and battery mount frames (for 6mm tubing)
1 - 1 gram Compass Mount (for 6mm tubing)
4 - 1 gram Leg Ends (for 6mm tubing)
Not included but required:
4 - 6mm aluminum or carbon tubing (choose your own length)
8 - 2mm screws (unless you use an adhesive)
Velcro tape (for locking horizontal battery movements)
Velcro (for easy battery mounting)
Additional comments:
For loosening and fastening the phantom compass don't use a screwdriver with a magnetic head!! And make sure that you mount the compass perpendicular to the body, in a vertical position for best flight performance.
If you decide to go for the color white, than keep in mind that this color can become discolored over time (sun, dirt, touch etc.).
Additional Upgrade:
Power Battery door Upgrade-Kit
If you have any comments or questions please leave a comment below.
And if you like this product please leave a Star-rating (at the top of this page) or a comment (at the bottom of the page).
Thanks and have Fun flying your Phantom!!
Give your DJI Phantom a custom look with this beautiful landing gear and upgrade your in flight battery capacity with the integrated battery mount, which allows you to mount two (standard size and larger size) batteries in a parallel setup for longer flight times.
Depending on your Phantom (Naza-M) voltage settings you can get 12 to 20 minutes of flight-time in parallel setup.
If you are using or want to use a small gimbal or camera see also the slim version of the landing gear Upgrade-kit.
Main Features:
See video and photos for an impression and building instructions.
Includes:
Not included but required:
Additional comments:
Additional Upgrade:
If you have any comments or questions please leave a comment below.
And if you like this product please leave a Star-rating (at the top of this page) or a comment (at the bottom of the page).
Thanks and have Fun flying your Phantom!!
by
barbecuesteve
A version of the Magsafe Clip that allows you to tether the clip with a string or rubber band rather than clipping it to the cord. The adapter is designed for a VERY snug fit. In fact, when you insert the adapter into the clip, you will remove a small amount of material from the inside corners of the clip. It will take some work and patience to get the adapter into the clip. But once it's in, it will be very snug, and should hold for a lifetime of usage.
by
mkermol
This is a small and light sculpture, that's perfect as an egg cup.
Part of our ongoing easter series this was designed as an atypical way to hold your egg for consumption.
Some easter traditions see the children weaving makeshift nests so the easter bunny could place eggs and gifts in them just after sunrise(usually leaving the kids wondering how in gods name did he get past them without anyone noticing).
This particular nest will also do nicely as a way to expose an easter egg that you particularly fancy in way that's both traditional and with a flare of modern design.
by
thomashuang.net
Nomad Panohead Yasuhara Madoka 180 NEX X
Visit thomashuang.net for more information.
The Yasuhara Madoka 180 fisheye lens is currently the only lens for the Sony NEX system that offers a complete circular image. Compact and lightweight, the Nomad Panohead for the Madoka 180 lens is quick and simple to use for creating spherical panoramic photos in 4 shots, an comes in 2 versions, a fixed tilt and multi-tilt version. The Nomad Panohead body and fasteners are sold and shipped separately, due to the production process. You need to purchase fasteners to operate the Nomad Panohead.
- Multi-tilt X version (0°, ±4°, ±8°, ±12°, & reversed +19mm offset)
- Fixed position at NPP for horizon (except reversed offset)
- Rotator at 15° increments, marks for 4 + 6 divisions
- Flip rotator over for smooth rotation
- Material: PA2200 Nylon, strong and durable
- 3/8"-16 thread mount (1/4"-20 adapter not included)
- 6000 x 3000 px resolution when used with 16mp APS-C camera
This purchase is for the panohead body ONLY. Fasteners are sold and shipped separately. You MUST purchase fasteners to operate the Nomad Panohead. 取り付けに必要なネジ類は別売りです。 パンヘッド本体とは別送となります。 Camera, lens mount adapter, lens, tripod, monopod, thread adapter, tape, knife, bags, and other accessories in photos and videos are not included and need to be purchased on your own.
Compatible with:
- Sony NEX-7, NEX-6, NEX-5R, NEX-F3(+8°, +12° with grip up or sideways)
- Sony NEX-5n, NEX-5 (+8°, +12° with grip up or sideways)
- NEX-c3, NEX-3
by
simensays
DJI Phantom Landing Gear Kit V3, includes the Leg Mounts, Compass Mount and 4 Leg Ends. Now with ever wider stance than earlier.
These mounts fit directly to your Phantom, using the stock screws, and replace your stock landing gear. You provide your own 6mm tubing (preferably carbon fibre or aluminium), cut to the desired length, to give you the height you want, in order to allow for taller gimbals/camera set up/dampening mounts and so on. I have found 5" tube to be an ideal length for my set up, with gimbal and GoPro.
Please note, that the tubing is not included in the listing, they are to show what the assembled kit looks like on the leg extensions. The kit includes 4 Leg Mounts, 1 Compass Mount and 4 Leg Ends.
The leg mounts are directional, and there is now a small marking under each leg, to easily identify (1-4 dimples refering to the arm number as in the manual). 1 = front left arm, 2 = rear Left arm, 3 = rear right arm, 4 = front right arm. This is when the Phantom is viewed from the front.
These are a beefed up version of the previous Leg Mounts I made, and use in the video, showing how I made the set up on my Phantom. Updated, so tubing can be pushed into the holes (which are slightly cones), and secured with a 3mm fixing screw (not included). The mounts are directional, like your props. see pictures above for reference or check out this video of how I assembled mine http://vimeo.com/simensays/phantom This is a simple DIY mod that replaces the stock landing gear, allowing you to easily make your Phantom taller, more stable, save weight (depending on how long you want your legs and what type of tubing you use) and a better overall look and stance. Only basic tools are needed. I am setting up a blog on my website, where I will post info, videos etc on other mods I have done to my quad, including how to make the leg extensions. www.simensays.com Beware to mount your Compass correctly, to maintain optimal flight characteristics on your Phantom. It should be mounted perpendicular to the body, in a vertical position. The included compass Mounts makes this very easy when using these legs. I use velcro on to fasten my compass.
The leg mounts are directional, and there is now a small marking under each leg, to easily identify (1-4 dimples refering to the arm number as in the manual). 1 = front left arm, 2 = rear Left arm, 3 = rear right arm, 4 = front right arm. This is when the Phantom is viewed from the front.
These are a beefed up version of the previous Leg Mounts I made, and use in the video, showing how I made the set up on my Phantom. Updated, so tubing can be pushed into the holes (which are slightly cones), and secured with a 3mm fixing screw (not included). The mounts are directional, like your props. see pictures above for reference or check out this video of how I assembled mine http://vimeo.com/simensays/phantom This is a simple DIY mod that replaces the stock landing gear, allowing you to easily make your Phantom taller, more stable, save weight (depending on how long you want your legs and what type of tubing you use) and a better overall look and stance. Only basic tools are needed. I am setting up a blog on my website, where I will post info, videos etc on other mods I have done to my quad, including how to make the leg extensions. www.simensays.com Beware to mount your Compass correctly, to maintain optimal flight characteristics on your Phantom. It should be mounted perpendicular to the body, in a vertical position. The included compass Mounts makes this very easy when using these legs. I use velcro on to fasten my compass.
by
moloko
minimalist design, great functionality.
This shaker is conveniently filled from the top through it's big funnel-shaped opening. There is no plug, no lid - just this one hole does the trick.
The internal design of the shaker allows individual and precise dispensing from first to last serving.
Choose between black or white glazed ceramics, the only food safe-tested materials on Shapeways.
This shaker is conveniently filled from the top through it's big funnel-shaped opening. There is no plug, no lid - just this one hole does the trick.
The internal design of the shaker allows individual and precise dispensing from first to last serving.
Choose between black or white glazed ceramics, the only food safe-tested materials on Shapeways.
by
jet
This is a mount for attaching an Microsoft Kinect sensor to a standard 1/4"x20tpi tripod screw. It requires no modification to your Kinect -- it clamps around the base instead of requiring you to tap screws into the bottom of the Kinect.
You will need a single 1/4"x20tpi jam nut to use this mount. Assembly instructions are here: http://www.thingiverse.com/thing:6930.
IMPORTANT: The holes for the jam nut and screw are deliberately undersized due to the variations in tripod mounts and jam nuts. You'll need to use a hobby knife to open it up and make it fit your particular rig.
This version is for installations where the Kinect is mostly in the normaly horizontal plane. We are working on a new version to handle 90 degree and 180 degree (upside down) installations.
You will need a single 1/4"x20tpi jam nut to use this mount. Assembly instructions are here: http://www.thingiverse.com/thing:6930.
IMPORTANT: The holes for the jam nut and screw are deliberately undersized due to the variations in tripod mounts and jam nuts. You'll need to use a hobby knife to open it up and make it fit your particular rig.
This version is for installations where the Kinect is mostly in the normaly horizontal plane. We are working on a new version to handle 90 degree and 180 degree (upside down) installations.
by
ZeusRage
Miniature of a futuristic heavy infantry soldier armed with a dual proyectiles/laser cannon and a shield capable of deflecting artillery shots. Ideal to put on the desktop. 5cm tall.
by
vertigopolka
Double Infinity Wedding Keepsake designed especially for my brother's wedding, but available now as a commemorative wedding keepsake to help celebrate your special moment with others. Price is for a single printed keepsake; does not include ring.
by
JamesSaunders
Now available in new colors!
This is a smaller version of my Porcupine Crayon Holder for use with colored pencils.
by
GowStar
L size ring.
US size: 9
Asian size : 18
Size M, S, XS is also available.
US size: 9
Asian size : 18
Size M, S, XS is also available.
by
IHeartEngineering
This is a servo mount for the Point Grey Flea2 and Chameleon Cameras. These cameras are fairly popular for robotics since they have a global shutter which is often critical for machine vision tasks.
Designed for HiTec HS-325HB Servo.
The mounting plate can be connected to the servo using M1.6 screws or M2x6mm screws with nuts. You could probably modify the design to work with imperial sizes if you wanted to.
Designed for HiTec HS-325HB Servo.
The mounting plate can be connected to the servo using M1.6 screws or M2x6mm screws with nuts. You could probably modify the design to work with imperial sizes if you wanted to.
by
Propex
Notestand two is a simple stand for cards and small notes. It is a hollow cube with five slots in an angle. It is suitable for home, offices and shop environments. Use it for organizing and displaying your notes or cards.
Product page: www.viitasalo.com/juho/notestands.php
Design by: Juho Viitasalo - Propex Design - Osaka, Japan
Web: www.viitasalo.com/juho/
Product page: www.viitasalo.com/juho/notestands.php
Design by: Juho Viitasalo - Propex Design - Osaka, Japan
Web: www.viitasalo.com/juho/
by
opresco
• This model is the #2 variation of the EEB #3 (3-d Logotype) design that could be seen on this page:
http://www.shapeways.com/model/130353/2e1b__threedee_logotype__1_.html
http://www.shapeways.com/model/130353/2e1b__threedee_logotype__1_.html
by
antohneeo
Entry for My Keepon Challenge. Material: White Strong Flexible; Color: Feel free to paint the mask in any color combination you prefer!
by
AustinAustin
Suit Up!
From Mad Men to White Collar everyone loves a man in a suit.
“Suits are full of joy. They're the sartorial equivalent of a baby's smile.”
Barney Stintson How I Met Your Mother.
by
polychemy
An IPhone 4/4S case based on the traditional Maze.
A fun contemporary design. Meticulously sculpted in 3D . A true test of design complexity.
+Designed and Sculpted in 3D.
+Tried and tested for everyday use.
+Comes in 4 different colors.
+Easy access to all ports and slots on IPhone4/4S. Camera and flash cutouts.
+Made with Polyamide plastic. Textured to the touch.
+Delivery Time: 20 days
* Text not included
For a customizable option, visit us at : http://polychemy.com
If you like our work, please support our facebook page for product updates and news:
https://www.facebook.com/polychemy
A fun contemporary design. Meticulously sculpted in 3D . A true test of design complexity.
+Designed and Sculpted in 3D.
+Tried and tested for everyday use.
+Comes in 4 different colors.
+Easy access to all ports and slots on IPhone4/4S. Camera and flash cutouts.
+Made with Polyamide plastic. Textured to the touch.
+Delivery Time: 20 days
* Text not included
For a customizable option, visit us at : http://polychemy.com
If you like our work, please support our facebook page for product updates and news:
https://www.facebook.com/polychemy
by
unellenu
The Resonator collection by unellenu includes the following designs
Reverb Tag Pendant, inspired by reverb patterns and geometry, with echoing and overlapping lines.
Secure Access Tag Pendant, with Guilloché patterns. Patterns similar to this are often used for security on currency and documents. I like the idea that a tag like this could be a used as a key or a code for secure access, particularly in a sci-fi setting.
Angeldevil Tag Pendant, with an abstract winged entity on one side and a downward pointing motif on the other.
Spaceship Door Tag Pendant, with a complex symmetrical pattern radiating out from the centre.
unellenu website
http://unellenu.com
The unellenu store on shapeways
http://www.shapeways.com/shops/unellenu
twitter: unellenu
http://twitter.com/unellenu
facebook: unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu sculpture and homewares
http://www.facebook.com/pages/Unellenu/188186071212813
http://www.youtube.com/unellenu1
by
mechnologytech
Insert headphone jack through this spool and then plug jack into ipod or iphone. Reel in headphones as needed. Storage is convenient with headphones wound in reel.
by
lukas.suess
Background information:
http://en.wikipedia.org/wiki/Penrose_tiles
You need the 13 skinny rhombs too (preferably in an other color) to have a complete set. The tiles are 2mm thick and their edges have a length of 20mm.
The connecting rod is inteded to be cut off.
Results of my testprint in "Strong White and Flexible":
It comes as a wobbly snake and it takes one only five minutes to loosen the parts from the connecting rod.
still wating for the skinny rods
http://en.wikipedia.org/wiki/Penrose_tiles
You need the 13 skinny rhombs too (preferably in an other color) to have a complete set. The tiles are 2mm thick and their edges have a length of 20mm.
The connecting rod is inteded to be cut off.
Results of my testprint in "Strong White and Flexible":
It comes as a wobbly snake and it takes one only five minutes to loosen the parts from the connecting rod.
still wating for the skinny rods
