Discover » Gadgets » Accessories

by xxdaggerxx
A BlackBerry 9000 case inspired by the Human Fingerprint.

Case has been tested for everyday use and holds up nicely.

Looks best in WSF Polished.

Pieces fit together securely and can be removed with out much hassle.

All Ports and buttons are accessible.

*This item on sale does not come with the name "Aaron" on the back.

 
(17)  
  •  
From: $41.32
 
by swirlingbrain
I've attached a ball to the rolling ball sculpture with the idea that you cut it off and sand it and it should work as the marble. The marble is 5/8 inch so it should work with regular glass or wooden marbles too. Yea it works! See the video!
 
(6)  
  •  
From: $11.42
 
by WelshDesigns
This is a cookie cutter, it can also be used for clay or Play-Doh.
 
(9)  
  •  
From: $12.73
 
by aeron203
This bottle opener is styled convincingly like an old key. This can be worn on a lanyard, belt or wallet chain, but at four inches long, it may not blend-in well on your key chain.
 
(16)  
  •  
From: $42.97
 
by moflo
Mustachio-me!
 
(2)  
  •  
From: $16.50
 
by lab02
The Lightcip is an ambient light accessory for your iPhone. Just slide it over your iPhone, and use any of the free flashlight apps.

The Lightclip was designed specifically for 3D printing in White Strong and Flexible. This material is very strong (obviously), affordable and an excellent light diffuser. The Lightclip emits a beautiful ambient light, which is evenly distributed and very easy on the eyes. Use it as a nightlight, at a camping trip or when in need of a superhero!

Please note that colors other than white block quite a bit of the light, but look amazing in a dark room and the Bat Signal is extremely bright!

Enjoy!
 
(2)  
  •  
From: $16.85
 
by JoshuaHarker
fits iPhone 4 & 4S
 
(0)  
  •  
From: $50.00
 
by SaGaDesign
The first of a series of fitness-inspired accessories from SaGa Design. It is inspired by the Finnish concept of "Sisu", which roughly translates as "determination" or "grit". The design appears to defy gravity, with the human figure being much smaller than the device he is supporting. Through this seemingly intense struggle, the device is forced upright and the design symbolizes the infinite determination each of us is capable of summoning to overcome hardship.
 
(1)  
  •  
From: $161.60
 
by Magic
The Ring'n'Roll is made of two portions of spheres, one inside the other. The outer ring can turn freely around the inner one.
The internal diameter is 20 mm (ask me if you need other dimensions). The inner ring can turn inside the outer shell (the clearance between the ring is 0.75mm, the thickness of each ring is 2 mm)

SUCESSFULLY PRINTED in Alumide. Unfortunatelly Metal is not possible (movable parts). A version with holes (less expensive) is also available.

Very very addictive...
 
(2)  
  •  
From: $13.90
 
by ransu
Ear horn (trumpet) for the hearing impaired!
 
(0)  
  •  
From: $68.49
 
by kspaho
Me metodat me të fundit së prodhimit dixhital, ju sjell pran jush një (iphone case) për të mbrojtur celularin tuaj. Metoda a prodhimit quhet (3d-printing) për të cilën mund të shihni një vidio to shkurtër duke klikuar linkun e poshtëm: http://www.youtube.com/watch?feature=player_detailpage&v=wD9-QEo-qDk Shëmbulli i sipërm ësht prodhuar duke përdorur materialin plastik që quhet (white strong and flexible polished) i cili ësht tepër i lëmuar. Produkti mund të prodhohet me ngjyra të tjera që mund ti zgjithni tek (select materials) në të djathte të faqes. Në qoftë se ini të interesuar në ky produkt, mund ta blini direkt në këtë website. Prodhimi filllon me një herë mbas blerjes dhe vjen me postë kudo qe te ndodheni në botë, për 15-25 dite (varet ku banoni) Faleminderit per interesin tuaj, dhe ta gezoni!
 
(9)  
  •  
From: $20.00
 
by purligar
iPhone 4 bike mount for 1 1/4" bars provides unparalleled protection from bumps, impacts and drops, while also delivering a very high degree of dust, liquid and water resistance.

Update: iPhone 4S owners, please use iPhone 4S bike mount 1 1/4"

Inside the cover frame there is place to insert a 0.3-0.5mm PVC foil as water protection. The touch display will still work through this foil.

Please note: the cover is not neccessary needed. This part is optional for more protection. Video at: http://www.youtube.com/watch?v=AHDGJ_1NVUk

If you have a 1" bar (24-26mm) please use: iPhone bike mount for 1" bar

All necessary parts except PVC foil are included in this assembly.

Bike mount an case has been tested for everyday use and holds up nicely. Pieces fit together securely and can be removed with out much hassle. All Ports and buttons are accessible.

This assembly includes the following uploads:
1 1/4inch bike mount
iPhone 4 bike mount (cover)
iPhone 4 bike mount (case)

 
(6)  
  •  
From: $69.02
 
by Emm@nuel
Quintrino 0,025.-6,8cm
Mathematical oddity (dodecahedral symmetry) discovered by B. Grossman.
 
(9)  
  •  
From: $40.82
 
by Mstyle183
This is an iphone 4/4s case
This is the cleaner and more sleek version of the all in one iphone case.. Main difference is that this one does not have a bottle opener or little bumps that work as headphone organizer. Also this version has extra side walls for extra protection. Are you tired of carrying a bunch of other stuff in your pockets? do you ever wonder i wish i could just get one item that does it all? Well after a lot of research and personal pocket experience i have ben able to design a product that covers pretty much everything you will need out in the road.. Wallet, credit card holder, id holder, bussiness card holder, money clip, earphone organizer.. all in a tiny very compact case that will also prevent damages to your iphone.. this is like the Macgyver of the iphone cases.. this is like the swiss army of wallets.. this is like the master of money clips.. this is insanity and this case can be yours for the cheap price of $$ **prices depend on the materials..

**If you want more space for more cards without the bulk i would suggest getting a slim wallet. They are extremely thin.
slim-minimalistic-wallet-money-clip-bottleopener
or
slim-minimalistic-wallet-with-money-clip
or for the ladies
 the bikini Wallet
 
(0)  
  •  
From: $30.76
 
by curvecreative

Nanoclip - Sports clip case for iPod Nano 7g

Putting the run back into nano and letting you wear your new nano how you want to.

The iPod nano used to be about running. It was perfect for it. Neat size, Nike plus, awesome clip for your clothes, light and just enough music.

Then the 7th gen Nano came around. It is even more awesome, now with bluetooth and a bigger screen. But we couldn’t help notice that this time around there was no clip. We love to run and the clip is the only thing that stops our shiny nano cracking itself on the floor.

Introducing the Nanoclip. This 3D printed, one part case for the new nano features a built in clip that fits snug over your sweatband, keeps your nano secure in your pocket, on your jacket sleeve or neck of your tee.

It puts the run back into nano and lets your wear your new nano anywhere. Paired with nike plus it’s as good as the nano ever was.

Click here to visit our site

Or click here to keep up to date on Facebook

 
(1)  
  •  
From: $25.97
 
by GabrielGullbergh
A old world Wizard or calabash style smoking pipe . Fully functional, intended for pipe tobacco use.

*Does not include actual bowl piece*
Click here for bowl piece


Want to get the set?

118x87_834234_738682_1357413296.jpg + 118x87_788088_738678_1357413273.jpg
addsetbutton.png



 
(1)  
  •  
From: $10.43
 
by Mr.Engineering.Design
 
(2)  
  •  
From: $19.99
 
by Ahead
 
(0)  
  •  
From: $20.21
 
by aeron203
The hyperbolic projector is a finely tuned expressive instrument worn on the end of a finger. It's capable of amplifying the dramatic content of your speech by up to twenty times. When worn on the index finger, it has a range of approximately 10 yards with a 15 degree beam angle.

It also works when pointed upward, as when used in traffic, and has been shown to effectively confuse and disorient the target for up to 15 seconds. Those with smaller fingers might wear the Hyperbolic Projector on their thumb, making it easy to conceal, and maintaining the element of surprise. Available in small, medium and large. Large size is roughly equal to a 17mm thimble.
 
(6)  
  •  
From: $50.00
 
by SaGaDesign
A user-friendly adjustment to our award-winning Siri design, this iPhone 4/4s case is adjusted so as not to obscure the screen and can also function as an iPhone stand.
 
(4)  
  •  
From: $83.50
 
by LasseKlein
This keychain can be used to unlock shopping carts without leaving the key in the cart. It is based on a Norwegian 10 kroner, but it is also tested to work with carts taking euros.
 
(1)  
  •  
From: $5.85
 
by sketchaholic
Battery tray for Oversky 3.7v 400mah 20c lipos
 
(0)  
  •  
From: $4.90
 
by Dmudd91
Nice little top, I bought mine in Stailless steel.  It can spin 30+ seconds, but the plastic one will most likely spin less.   
 
(1)  
  •  
From: $8.25
 
by AustinAustin
Suit Up! From Mad Men to White Collar everyone loves a man in a suit. “Suits are full of joy. They're the sartorial equivalent of a baby's smile.” Barney Stintson How I Met Your Mother. A great Groom, Bestman/ Groomsman gift. Pair it with the "Lace up" corset iphone cover for Brides in white & Bridesmaids in Pink.
 
(1)  
  •  
From: $27.44
 
by Vulpodrac
Turbinewheel for the FD 3/64 jetturbine, which was designed by Dipl.-Ing. Kurt Schreckling. The model was made according to the drawings contained in modell-technik-berater 20.

For liability reasons, this model is not endorsed for actual use by its creator, and any applications other than ornamental use are done entirely at the risk of the end user! This model, as with any high-speed rotary object, may cause personal harm or damage to property or persons in case of failure, and no guarantee, warranty, promise or suggestion of safety is made or offered by the creator.
 
(4)  
  •  
From: $8.79
 
by Salokannel
This is a snap case designed for iPhone 4.

Stripes are statement! Like in fashion stripes have always give strong message from it's owner. Scotch have it as national pattern, punks have also adopted them and it's basically always in fashion. Be proud and show it for the others!

You can get it in pure snow white or colored nylon (Black, Red, Gray, Indigo or shiny alumide). Nylon's nice rough texture gives a good grip for the phone. The material is also strong and flexible, to give the best support for you device.

Just order and enjoy your phone with a unique touch. iPhone 4 and wire are not included.

Questions and requests please contact straight to my personal e-mail: pekka.salokannel@gmail.com


 
(6)  
  •  
From: $25.88
 
by CodeCreations
This is a model used to test printing detail of various materials. To see a detailed key and a high resolution example printed in Stainless Steel, visit http://www.thefrankes.com/wp/?p=2138. This object is tiny and includes many details in the 0.0 to 1.0mm range; it many not print in all materials, but I've made it available in all in case you want to try.
 
(1)  
  •  
From: $4.07
 
by NeueFreunde
The perfect gift for all barbecue fans and steak lovers: the Texas Longhorn Toothpick Holder. This metal made bull skull holds one single toothpick at the time. The Texas Longhorn Toothpick Holder adds a nice and funny detail to your table arrangement at your next barbecue dinner.
 
(0)  
  •  
From: $21.09
 
by TravisRoske
A classic gyroscope.

Simply put a string throught the hole in the main shaft and wind it up. When your ready pull the string hard to get it spinning. Once its going it resists changes in its orientation, so try balancing it on a string or the edge of a table or even your own finger.


 
(7)  
  •  
From: $14.50
 
by purligar
The Bike Mount for iPhone lets you attach your iPhone 3G / 3GS to your bike’s handlebars so you can track your GPS position, your speed, or distance travelled, while you ride.

Easy to mount and remove by a bayonet nut connector.

The bike mount is designed for bikes with 1" (24-26.5mm) handlebars.

Portrait or landscape mode, it’s your choice (see the pictures).

Tested and used during the last months by several people.

Please take a look also on my other iPhone cover designs and the iPhone 4 bike mount

video available ... see youtube link below.
 
(6)  
  •  
From: $28.62
 
by WelshDesigns
Cookie cutter, or for Play-Doh.
 
(8)  
  •  
From: $14.43
 
by peter@tenonedesign.com
Puzzle Case will set your iPhone apart from all the rest. Order this one-of-a-kind design with your choice of color for the top and bottom pieces. This is the bottom piece. Be sure to also order at least one Puzzle Case Top piece. http://www.shapeways.com/model/362220/puzzle_case_top.html
 
(0)  
  •  
From: $10.01
 
by tedk727
Second version of iphone4 bumper snap fits. Protect your iphone with distinctive style. Thin profile minimizes extra volume on your iphone.
 
(12)  
  •  
From: $22.53
 
by IHeartEngineering
Metric Socket Set
Part # Size
26590 Set of 2.5mm 3mm 3.5mm 4mm 4.5mm 5mm 5.5mm 6mm

Requires 3 #6x1/2" wood screws for mounting. Grey Robust material is suggested.
 
(10)  
  •  
From: $13.22
 
by AnnexProducts
This part is just the locking collar (the blue part) of the Quad Lock Bike Mount Pro. Customise your Quad Lock Mount to match your bike or add some bling with a polished gold collar! For more information head to www.quadlockcase.com
 
(0)  
  •  
From: $10.00
 
by JANGO
 
(0)  
  •  
From: $7.19