Discover » For Your Home
by
JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Small is pictured sitting in the hand. See pic of all 3 sizes together for comparison.
by
Gijs
Do you want to order more than 1 in a single color? Check out this set of 2, or this set of 4 to save some money
This eggcup is printed on demand in laser sintered polyamide. The eggcup can hold a medium egg and due to the flexible nature of the printing material, it will adapt its shape to larger eggs as well.
This eggcup is printed on demand in laser sintered polyamide. The eggcup can hold a medium egg and due to the flexible nature of the printing material, it will adapt its shape to larger eggs as well.
by
JoshuaHarker
Scaled down version without the jaw of the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time.
by
Whystler
The nocturnal (or nocturlabe) is a very old instrument for telling time at night by measuring the stars. While concept is ancient, this design is all original. It is fully functional (all dials move properly) and meant to be worn as a pendant. This is now available for sale, as it has been tested and works nicely.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
by
Gijs
This set of 4 eggcups is printed on demand in laser sintered polyamide. The eggcup can hold a medium egg and due to the flexible nature of the printing material, it will adapt its shape to larger eggs as well.
The product will be shipped in standard Shapeways packaging and delivered within 10 working days.
Shipping costs vary upon destination, and will be calculated when checking out.
The available colors will vary by season and are therefore time limited.
The product will be shipped in standard Shapeways packaging and delivered within 10 working days.
Shipping costs vary upon destination, and will be calculated when checking out.
The available colors will vary by season and are therefore time limited.
by
Dotsan
No1 in the series of animal heads, a smaller version of the 570mm high Stag Head (which is not available on Shapeways)
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
There is also a 75mm version here and a 300mm version here
The Animal Head Collection.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
No 5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination.
Please send your pictures and share your thoughts on the design.
by
JoshuaHarker
The filigree design over the skull symbolizes the ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Medium is between life-size & small version. See pic of 3 sizes together for comparison.
by
MichielCornelissen
Both a tribute to ubiquitous, and lovely, hexagonal colour pencils, and a representation of what was coined by Joris Peels as 'combinatory manufacturing'.
Combine the connector piece with any set of 36 standard hexagonal pencils of about 7.0 mm cross section (measured at the smallest diameter). These types of sets are available around the world from many department stores and art supply stores - I’ve seen good sets for as little as 5 euro.
Examples of pencils that fit are Stabilo Aquacolor 1600, and Caran d’Ache Prismalo I, but there are many more. I’ve recently heard that in the US, Prismacolor Verithin Colored Pencils (available from Amazon and others) work well. Normal black pencils often have the same size and shape and can be used too.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy). Assembly may leave slight marks on pencils. For more information on this or other products, please visit www.michielcornelissen.com.
Combine the connector piece with any set of 36 standard hexagonal pencils of about 7.0 mm cross section (measured at the smallest diameter). These types of sets are available around the world from many department stores and art supply stores - I’ve seen good sets for as little as 5 euro.
Examples of pencils that fit are Stabilo Aquacolor 1600, and Caran d’Ache Prismalo I, but there are many more. I’ve recently heard that in the US, Prismacolor Verithin Colored Pencils (available from Amazon and others) work well. Normal black pencils often have the same size and shape and can be used too.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy). Assembly may leave slight marks on pencils. For more information on this or other products, please visit www.michielcornelissen.com.
by
nervoussystem
The Hyphae lamp is a series of organic table lamps based on how veins form in leaves. Each lamp is a completely one-of-a-kind design 3D-printed in nylon plastic. The lamps are lit by eco-friendly LED's and cast dramatic branching shadows on the wall and ceiling.
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp
About Hyphae
Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.
Lighting Specifications
The lamp comes with an eco-friendly 3-watt 200 lumen LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and works off a 120V or 240V outlet.
Please contact us at http://n-e-r-v-o-u-s.com/contact.php to receive the lighting components for the lamp. We will send them to you free of charge if you purchase the lamp shade.
by
Gijs
This set of 2 eggcups is printed on demand in laser sintered polyamide. The eggcup can hold a medium egg and due to the flexible nature of the printing material, it will adapt its shape to larger eggs as well.
The product will be shipped in standard Shapeways packaging and delivered within 10 working days.
Shipping costs vary upon destination, and will be calculated when checking out.
The available colors will vary by season and are therefore time limited.
The product will be shipped in standard Shapeways packaging and delivered within 10 working days.
Shipping costs vary upon destination, and will be calculated when checking out.
The available colors will vary by season and are therefore time limited.
by
rosethun@yahoo.com
Happy Valentines Day pendant,
or Wedding Favors,
Jewelry, key chain, or
Tschotske for your desk
Sculpture for your place
Be sure to look at all 3 dimensions!
by
Bathsheba
There are six regular convex polytopes in 4D, which are analogous to
the five Platonic solids in 3D. This is the fifth, the
hyperdodecahedron, a remarkably beautiful object brought to my
attention by George Hart.
Here it's shown in a Schlegel diagram so you can see all 120 dodecahedral cells, though most are transformed by perspective: in this projection, the only regular dodecahedra are the biggest one on the outside and the tiniest one at the center.
A smaller model is here.
Here it's shown in a Schlegel diagram so you can see all 120 dodecahedral cells, though most are transformed by perspective: in this projection, the only regular dodecahedra are the biggest one on the outside and the tiniest one at the center.
A smaller model is here.
by
MichielCornelissen
It's a cute little bird, but there's more to it. Merry Bird is an example of a product that can only be manufactured with 3d-printing technology. ?Take a close look: the bird and its hinged (!) swing are printed right inside the cage - no post-production assembly is necessary.
Originally designed as a Christmas ornament, Merry Bird looks good enough to display all year round.
Merry Bird is also available in design stores worldwide through designlabel Soonsalon; mail Sheila for information on the nearest shop to buy, and wholesale options.
by
joabaldwin
The design is based on the classic Celtic-style knot symbol for the World Tree from Norse mythology, Yggdrasil.
Inside the leaves you can see a small sphere of blue. If you look reaaally carefully, you could notice that the continents in the blue ball are in the shape of Pangea and not our current distribution.
Inside the leaves you can see a small sphere of blue. If you look reaaally carefully, you could notice that the continents in the blue ball are in the shape of Pangea and not our current distribution.
by
stefdevos
This detailed model of the moon is hollow and therefore very price efficient. It will balance on a small gap on the bottom. You can also hang it on a wire using a bent paperclip. See video and images. Made for full color sandstone.
by
tomrust
NEW! All in one integrated power pack for iPhone5. Order the KIT version here through Shapeways OR order completely assembled versions through our website at www.custompowersolar.com. Simple: Just slide your phone into the charger - it immediately starts charging your phone, plus you're free to continue using your phone while its charging without dangling wires to an external charger. When done, just grab the top of your phone and pull it out! No extra pieces to snap in, charger hold phone firmly in place while charging. Case holds iPhone, extended life 5000mah battery, and electronics to extend operating time an additional 3X. Includes electronics, replaceable battery and external rapid charger. iPhone 5 slips into top of case, and the charger and battery are hidden behind phone. Solar module option re-charges anywhere in full sun. Easy to carry solution for extending iPhone 5 battery life. White and black in stock. Kit version includes battery & electronics with self-adhesive backings that incorporate into case. Some assembly required, assembles in seconds. No tools required.
IMPORTANT! MUST fill out shipping address in order to have battery & electronics sent to you. Go to www.custompowersolar.com/contacts.htm Copy & paste link to your browser. Weight 138g
IMPORTANT! MUST fill out shipping address in order to have battery & electronics sent to you. Go to www.custompowersolar.com/contacts.htm Copy & paste link to your browser. Weight 138g
by
kspaho
Ever lose the little plate with nowhere to put your cup of espresso? It's confusing. Designed to eliminate the need for a plate or coaster, the plateless espresso cup can sit directly on the table without leaving a ring behind. Without the plate, you can move from room to room with your espresso and still have one free hand. You'll find yourself wondering why espresso cups ever got involved with the little plates in the first place. Can hold up to 90ml.
by
yanying
This design was inspired by the swirling seed heads of Clematis flowers. When I first saw the seed pods, the first thought that came to my mind was, "The flower is dancing." This model took me longer than expected to finish. My first model was a chaotic tangle of lines. (It looked like the flower went mad instead... hahaha) I went back to look at references to try to capture the original lightness and motion of the flower seeds. At the end, the model was tweaked further to make sure none of the tails intersect each other.
by
cunicode
one cup a day
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics
View the collection
new: available in Black Ceramics
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics
View the collection
new: available in Black Ceramics
by
virtox
Phamora Ceramics!
Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!
A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.
Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.
Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.
Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!
A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.
Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.
Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.
by
MichielCornelissen
Using 30 standard-sized pencils, and this kit, you can create an icosahedron-shaped object of about 38 cm or 15 inch in diameter. Use it as a cool lampshade, or just as fun and educational object to have around.
Fits standard hexagonal (colour) pencils of about 7.0 mm cross section - measured at the smallest diameter. Any length of the pencils will work, as long as they're all the same.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
Please note that the available colours are subject to what Shapeways offers, and may be different from those shown in the images here. Please refer to the support section for available colors. Assembly may leave slight indents on pencils.
Fits standard hexagonal (colour) pencils of about 7.0 mm cross section - measured at the smallest diameter. Any length of the pencils will work, as long as they're all the same.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
Please note that the available colours are subject to what Shapeways offers, and may be different from those shown in the images here. Please refer to the support section for available colors. Assembly may leave slight indents on pencils.
by
alienology
Clothoid.A lamp is created by a mathematical curve formula and then that spline is lofted in 3d CAD software. Resulting form is parametric and adjustable in almost infinite number of combinations.
You can imagine this 3D form as afterimage of one single point in space as it moves, self-intersecting and rotating around, creating this 3D object. Whole shade form is actually one single line... wrapping around itself. Whole 3d printed light shade is created in one piece.
This lamp is available for purchase now on Shapeways. What you will get from Shapeways is 3D printed lamp shade only.
NOTE: Lamp base will be sent separately. Use "contact designer" button on upper right of this page... or send us e-mail to > info (at) alienology.com
You can imagine this 3D form as afterimage of one single point in space as it moves, self-intersecting and rotating around, creating this 3D object. Whole shade form is actually one single line... wrapping around itself. Whole 3d printed light shade is created in one piece.
This lamp is available for purchase now on Shapeways. What you will get from Shapeways is 3D printed lamp shade only.
NOTE: Lamp base will be sent separately. Use "contact designer" button on upper right of this page... or send us e-mail to > info (at) alienology.com
by
OneSaveSolutions
This chess set re-imagines the bodies of the traditional chess pieces to incorporate each piece's name as the focal point of their design.
It should be noted that each color/material must be ordered separately. This does, however allow for mixing and matching.
by
tomorrowlab
Solo e Sola is an espresso cup that holds a single cigarette.
The Solo e Sola cup was inspired out of need, and could be used to build an entire business model... imagine a food truck offering single espresso shots with single cigarettes. Currently illegal, probably unhealthy, yet understandably desirable, Solo e Sola is a serving piece for a food truck, a cafe or a restaurant, or individuals.
A product of Tomorrow Lab’s CoBuilt process [ http://tomorrow-lab.com/cobuilt ], this cup was developed for a low cost using rapid fabrication processes including an inhouse MakerBot and Shapeways.com.
by
virtox
A hanging cup for your double espresso the morning after ;-)
It's in such a state that it cannot stand on it's own, so it really needs some support.
Luckily it has :-)
When you order, you will get the Hangover cup and the matching stand in glazed ceramics.
Printed Ceramics
With the current process, the round bottom on the cup will likely show some minor pits in the glazing from a small tripod it stands on during the baking.
And the bottom of the stand/saucer has rougher structure.
The rest of the glazing is fully covering, so it's safe to drink from.
Also available as a more sober version (standalone)
The cup is designed for a double espresso(60 ml), but can hold a maximum of about 90 ml.
Check out this photo of black version here
It's in such a state that it cannot stand on it's own, so it really needs some support.
Luckily it has :-)
When you order, you will get the Hangover cup and the matching stand in glazed ceramics.
Printed Ceramics
With the current process, the round bottom on the cup will likely show some minor pits in the glazing from a small tripod it stands on during the baking.
And the bottom of the stand/saucer has rougher structure.
The rest of the glazing is fully covering, so it's safe to drink from.
Also available as a more sober version (standalone)
The cup is designed for a double espresso(60 ml), but can hold a maximum of about 90 ml.
Check out this photo of black version here
by
Dotsan
No2 in the series of 3D printed animal heads.
The Animal Head Collection.
No 1 is a Stag head.
There is also a 75mm version here and a 300mm version here
No 3 is a Rhino.
No 4 is a Tiger.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination. The Zebra head works well, I've concentrated on only printing the black parts leaving the white empty. It is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
The Animal Head Collection.
No 1 is a Stag head.
There is also a 75mm version here and a 300mm version here
No 3 is a Rhino.
No 4 is a Tiger.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination. The Zebra head works well, I've concentrated on only printing the black parts leaving the white empty. It is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
by
SheilaMunro
Detailed Raven Mask Necklace Charm. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca Only $39.99 in Gold Plated Glossy. Successfully printed in a variety of materials, bars are approximately 2-3 mm.
by
MikeNaylor
A surprising arrangement of figures to create a mathematical form.
Please note that you must order TWO SETS to create the cube – each set includes two figures and four are necessary to create this sculpture. The figures are identical and snap together tightly hands to ankles to make this striking sculpture. Mix and match colors for your own effects. Or order more than two sets to experiment with other configurations.
This model is being exhibited at the Center for Arts Gallery at Towson University, June 30-July 28, 2012.
Please note that you must order TWO SETS to create the cube – each set includes two figures and four are necessary to create this sculpture. The figures are identical and snap together tightly hands to ankles to make this striking sculpture. Mix and match colors for your own effects. Or order more than two sets to experiment with other configurations.
This model is being exhibited at the Center for Arts Gallery at Towson University, June 30-July 28, 2012.
by
TerraCotta
A design inspired by starfish dancing together in the ocean, this fluid, intricate pendant deserves a place close to the heart--yours or a loved one's. Available in solid, durable stainless steel for lasting quality in a variety of finishes; black and white glass for a classic, delicate look; or sterling silver for a refined elegance that will feel comfortable at any occasion. Matching earrings available at http://www.shapeways.com/model/52035/starfish_kanga_earrings.html
To learn more, visit our website at http://www.terracottapf.com
To learn more, visit our website at http://www.terracottapf.com
by
joabaldwin
Endless motherf$#&ing bacon! A full color, delicious strip of bacon, twisted around itself, having only one side.
All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.
-- Kosher. Vegan friendly. --
Disclaimer for idiots: Don't eat it.
All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.
-- Kosher. Vegan friendly. --
Disclaimer for idiots: Don't eat it.
by
s_f_x
A beautiful translucent tea candle light which will look great on any table. The sleek and simple design goes well with many styles. The petals are quite thin to let the light through, yet the model is not overly fragile.
This light has been successfully tested with standard sized tea candles. However, as this model is made of plastic, use the usual safety precautions when using with candles and fire - never leave unattended, keep away from combustible material, and keep out of the hands of children.
This light has been successfully tested with standard sized tea candles. However, as this model is made of plastic, use the usual safety precautions when using with candles and fire - never leave unattended, keep away from combustible material, and keep out of the hands of children.
by
Dotsan
This is a truly inspiring piece, designed to use the minimum material while keeping the cost low. This is large at 300mm high, it's a show stopper a head turner. Shapeways have been pushed to their limits to produce and ship this. It is strong but light and only needs small pin or nail to hang it. The fine 1.5mm wire structure comes together to create a wonderful majestic stag head and a wonderful balance of weight in the form while almost being invisible.
The Animal Head Collection
No 1 is a Stag Head.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
5 is an Elephant.
We have created an alternative 580mm high flat version
There is also a 75mm version here
The Animal Head Collection
No 1 is a Stag Head.
No 2 is a Zebra.
No 3 is a Rhino.
No 4 is a Tiger.
5 is an Elephant.
We have created an alternative 580mm high flat version
There is also a 75mm version here
by
lilys.
On Proper Usage and Inhibited Ingestion:
Why is it that we find the cup so unappetizing? Could it have originated from survival tactics where we relate our proximity to another's teeth as a threat of life, a reminder of predator and prey, poison and contamination?
Is this object then successful in its design to prevent gluttonous behavior should food and drink only be offered in the cup?
more information at http://lilysu.com
by
nervoussystem
This 7" pendant lamp is covered by ridges and valleys that transmit different amounts of light when illuminated; they furnish a striking pattern whether the lamp is on or off.
We created the form by simulating a process where two chemicals diffuse across a surface and react with one another to form stable patterns. This process, reaction-diffusion, can be used to explain the intricate patterns found on the skin of many types of animals, from the spots of leopards to the radiating stripes of angelfish. Growing a pattern with different parameters can produce dramatically different results.
Here, we orchestrated a pattern that twists elegantly towards the base of the lamp where it terminates in a gentle spiral. Lines diverge and converge along the contours of the sphere, blanketing the surface in many deep grooves. We think the pattern recalls the forms of sand dunes and hard corals.
Only the shade portion of the lamp is shipped by shapeways. The light fixture can be purchased separately from us, email us at hello@n-e-r-v-o-u-s.com
Light Fixture The lamp comes with an eco-friendly 3-watt LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and plugs into the wall.
We created the form by simulating a process where two chemicals diffuse across a surface and react with one another to form stable patterns. This process, reaction-diffusion, can be used to explain the intricate patterns found on the skin of many types of animals, from the spots of leopards to the radiating stripes of angelfish. Growing a pattern with different parameters can produce dramatically different results.
Here, we orchestrated a pattern that twists elegantly towards the base of the lamp where it terminates in a gentle spiral. Lines diverge and converge along the contours of the sphere, blanketing the surface in many deep grooves. We think the pattern recalls the forms of sand dunes and hard corals.
Only the shade portion of the lamp is shipped by shapeways. The light fixture can be purchased separately from us, email us at hello@n-e-r-v-o-u-s.com
Light Fixture The lamp comes with an eco-friendly 3-watt LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and plugs into the wall.
