These brackets allow the discrete fitting of LED micro-extrusion to IKEA GRUNDTAL shelves to create a nice downlighting effect. http://www.ikea.com/gb/en/catalog/products/00011428/ http://www.mr-resistor.co.uk/item.aspx?g=10&t=1466&r=1467&i=7896&a=

Adapter ring for helix lamp and E27 bulb socket.

This part can be downloaded and modified if necessary.

I must go down to the seas again, to the lonely sea and the sky. And all I ask is a tall ship and a star to steer her by. And the wheel's kick and the wind's song and the white sail's shaking, and a gray mist on the sea's face, and a gray dawn breaking.

http://www.ikea.com/us/en/search/?query=JANSJ%C3%96+LED+work+lamp
This Part mates the Jansjö lamp to Steelworks or other material with holes on 1-inch centers, freeing up desk/workbench space that would otherwise be taken by desk lamp(s). Having the lamps anchored solidly also makes repositioning a one-handed affair.
Instructions
The angle iron on this bench has 0.4" holes for 5/16" bolts. 5/16" was a bit beefy for this little part and I already had a nice-fitting hex-head recess for 1/4" bolts, so I used that. The result is that the bolt fit in the holes is sloppy, but the protrusion in the center of the back of the part engages a 0.4" hole snugly and holds the part in position. The holes are slightly below center to match the alignment of the angle iron and look more aesthetically pleasing. The hole on the end is a somewhat frivolous and not too well thought-out cable grommet so you can feed the Janjsö's power cord through it. Unfortunately there's a switch and a big plug on the cord so to feed it through the hole you need to cut and splice the cable. It's low-voltage so there's not much safety risk, but you do have to get the polarity right since this is after all an LED lamp.

Ikea Jansjö Lamp Mount by JuliaDee is licensed under the Attribution - Share Alike - Creative Commons license. Ikea Jansjö Lamp Mount (JuliaDee) / CC BY-SA 3.0
201.696.58 20169658

This is a microscope ring light. Add 28 5 mm LEDs (Nichia NSPW500GS-K1 for example) and current regulators. I used LM317 based CC sources with 5-6 LEDs connected in series. 24V power supply. Fits a 50 mm microscope barrel. This is actually just an example - design your own based on this idea.

Makes dark oven displays bright again

Use sugru to fasten these to your home, and use paracord to attach garland to the clips. For more info: http://swampcastle.blogspot.com/2012/01/garland-attached-to-brick.html

A lovely little vase or LED tealight lamp.

Loveis Candle holder Taken From a passage in the bible: Love is long-suffering and kind. Love is not jealous, it does not brag, does not get puffed up, does not behave indecently, does not look for its own interests, does not become provoked. It does not keep account of the injury. It does not rejoice over unrighteousness, but rejoices with the truth. It bears all things, believes all things, hopes all things, endures all things. Love never fails.

Cad exercise, too expensive to print.. Lamp shade - to be used with the standard external fittings - hole at top for wire.