Scaled down version without the jaw of the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time.

The nocturnal (or nocturlabe) is a very old instrument for telling time at night by measuring the stars. While concept is ancient, this design is all original. It is fully functional (all dials move properly) and meant to be worn as a pendant. This is now available for sale, as it has been tested and works nicely.

How to Use the Nocturnal:

The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.

Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.

Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.

Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.

Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.

So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.

Both a tribute to ubiquitous, and lovely, hexagonal colour pencils, and a representation of what was coined by Joris Peels as 'combinatory manufacturing'.

Combine the connector piece with any set of 36 standard hexagonal pencils of about 7.0 mm cross section (measured at the smallest diameter). These types of sets are available around the world from many department stores and art supply stores - I’ve seen good sets for as little as 5 euro.

Examples of pencils that fit are Stabilo Aquacolor 1600, and Caran d’Ache Prismalo I, but there are many more. I’ve recently heard that in the US, Prismacolor Verithin Colored Pencils (available from Amazon and others) work well. Normal black pencils often have the same size and shape and can be used too.

If you are new to the Shapeways website: to order you will be asked to create an account (it's easy). Assembly may leave slight marks on pencils. For more information on this or other products, please visit www.michielcornelissen.com.

This set of 2 eggcups is printed on demand in laser sintered polyamide. The eggcup can hold a medium egg and due to the flexible nature of the printing material, it will adapt its shape to larger eggs as well.

The product will be shipped in standard Shapeways packaging and delivered within 10 working days.

Shipping costs vary upon destination, and will be calculated when checking out.

The available colors will vary by season and are therefore time limited.

It's a cute little bird, but there's more to it. Merry Bird is an example of a product that can only be manufactured with 3d-printing technology. ?Take a close look: the bird and its hinged (!) swing are printed right inside the cage - no post-production assembly is necessary.

Originally designed as a Christmas ornament, Merry Bird looks good enough to display all year round.

Merry Bird is also available in design stores worldwide through designlabel Soonsalon; mail Sheila for information on the nearest shop to buy, and wholesale options.

The design is based on the classic Celtic-style knot symbol for the World Tree from Norse mythology, Yggdrasil.

Inside the leaves you can see a small sphere of blue. If you look reaaally carefully, you could notice that the continents in the blue ball are in the shape of Pangea and not our current distribution.

NEW! All in one integrated power pack for iPhone5. Order the KIT version here through Shapeways OR order completely assembled versions through our website at www.custompowersolar.com. Simple: Just slide your phone into the charger - it immediately starts charging your phone, plus you're free to continue using your phone while its charging without dangling wires to an external charger. When done, just grab the top of your phone and pull it out! No extra pieces to snap in, charger hold phone firmly in place while charging. Case holds iPhone, extended life 5000mah battery, and electronics to extend operating time an additional 3X. Includes electronics, replaceable battery and external rapid charger. iPhone 5 slips into top of case, and the charger and battery are hidden behind phone. Solar module option re-charges anywhere in full sun. Easy to carry solution for extending iPhone 5 battery life. White and black in stock. Kit version includes battery & electronics with self-adhesive backings that incorporate into case. Some assembly required, assembles in seconds. No tools required.
IMPORTANT! MUST fill out shipping address in order to have battery & electronics sent to you. Go to www.custompowersolar.com/contacts.htm Copy & paste link to your browser. Weight 138g

This design was inspired by the swirling seed heads of Clematis flowers. When I first saw the seed pods, the first thought that came to my mind was, "The flower is dancing." This model took me longer than expected to finish. My first model was a chaotic tangle of lines. (It looked like the flower went mad instead... hahaha) I went back to look at references to try to capture the original lightness and motion of the flower seeds. At the end, the model was tweaked further to make sure none of the tails intersect each other.

Phamora Ceramics!

Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!

A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.

Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.


Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.

Detailed Raven Mask Necklace Charm. Please contact for a customized version of this model. :) ancienteyes(@)shaw.ca Only $39.99 in Gold Plated Glossy. Successfully printed in a variety of materials, bars are approximately 2-3 mm.

A design inspired by starfish dancing together in the ocean, this fluid, intricate pendant deserves a place close to the heart--yours or a loved one's. Available in solid, durable stainless steel for lasting quality in a variety of finishes; black and white glass for a classic, delicate look; or sterling silver for a refined elegance that will feel comfortable at any occasion. Matching earrings available at http://www.shapeways.com/model/52035/starfish_kanga_earrings.html

To learn more, visit our website at http://www.terracottapf.com

Endless motherf$#&ing bacon! A full color, delicious strip of bacon, twisted around itself, having only one side.

All the textures are raised and carved onto the surface, the colors are bright and clear, and the edges have a scrumptious wavy twist. The material is thin enough to be semi-translucent, and of undeniable baconness.

-- Kosher. Vegan friendly. --

Disclaimer for idiots: Don't eat it.

Flower Pump is inspired by the muscle of love,
...every artery leads straight to the heart ....

Print size is 16.6cm high. Scale 1/10.
Altogether in one single piece.
Hollowed out inside, not colored.

Stands up without requiring stand.
Stand separately available @ http://www.shapeways.com/model/164605/figurine__hana___stand_.html
Or get the experimental universal figurine stand @ http://www.shapeways.com/model/168187/universal_figurine_stand.html

Also, check out this full color figurine, for only less than double the price! http://www.shapeways.com/model/190101/_santa_girl__figure__full_color_.html

Trouble with parents who want to see what's in that package you ordered? Add some PC fan grills to your order, that you can show them instead http://www.shapeways.com/model/170978/fan_grill_80mm.html (also available personalized)!

A design inspired by starfish dancing together in the ocean, these fun, intricate earrings will let you carry the beach with you. Available in stainless steel with optional bronzing or gold plating for daily wear with heirloom-level durability; or in elegant and refined sterling silver for special occasions. Matching pendant available at http://www.shapeways.com/model/52034/starfish_kanga_pendant.html Silver plated earring hooks included. To learn more, visit our website at http://www.terracottapf.com

A flower-shaped tea-light holder. Suited for approx. 4cm diameter tea-lights.

UPDATE 11 November 2012: Thicker walls - Should now work with polished and dyed Strong&Flexible

Julianna fractal lace,  fractal model, with a loop at the top for hanging.
Wear as a pendant , hang it on a wall, or near a window.

15.3cm X 9.5cm

The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu

Depicting the bittersweet experience of love & loss as well as suggesting that love is what you make of it. The anchor & chain are intended to symbolize the security of steadfast loyalty in stormy seas & that which keeps you from becoming aimlessly adrift. The arrow is love's tool of capture & the weeping tear symbolizes the pain of loss. The suspended ring demonstrates the promise of commitment. The skull is the symbol of the end of us all & the reminder of living in the present. See here for 3D Viewer

This little guy is a fox and proud of it.

This incarnation is best suited to use as a decorative object, but we're open to suggestions for how you'd like to see it modified for your use!

The two most interesting uses we've found so far are using the WSF (polished) version as a surprisingly striking little glow bulb if you shine a light inside it, and possibly using the (pleasantly hefty) stainless steel version as an imposing game board piece.


To the customer who recently ordered this in Antique Bronze Matte, we would love to hear from you as to how your order turns out! Please consider sharing a photo or your thoughts on it if you find the time. :)

This version is for metal or other materials that need additional thickness

This shade can be clicked directly on to a fluorescent light tube. The variation in thickness makes for a nice translucent effect. Inspiration for this design came from phototaxis: the attraction to light that insects such as moths have. That, and the observation that the boring 'bare' light tube in my girlfriend's kitchen could use a touch of creativity.

This version is fit for T8-tubes (1" in diameter). More versions, including other butterflies will follow.

An ornament in the shape of a tree, with some of the roots creating a garland around it. This ornament can stand on a surface or be hung in a window, in a tree or on a door. The branches produce a beautiful pattern regardless of which angle you view it in. All the lines is flowing and come together in harmony. Please note that the "White Strong & Flexible" material will turn yellowish if you leave it in the sun. If you're going to hang it in a window, make sure it faces the side of the building with most shadow.

Five intersecting tetrahedra with an icosahedron inside them.  There is just enough space between all the pieces that it will print as 6 separate objects.  The edge length of the tetrahedron is 7.5cm, it stands 8.6 cm high, about the size of a tennis ball.

This is a large somewhat abstract version of a dandelion. It's very cool in person, and would probalby look very interesting with designer lighting placed on it. It's a great addition to a room for someone that has everything, becasue I'm sure they don't have this yet. Check it out on youTube as well. http://www.youtube.com/watch?v=-mLc6lftEFE