The perfect modern easter home decoration. It holds one regular chicken egg.

This candle holder can be used with real candle or led candle, be careful for lighting the candle to light it before installing it ...! there is a hole underneath for better handling. If you are interested by a special color that shapeways doesn't sell, send me a message, we can find a good solution!

let see other led candle holder on my web site:
http://www.photophoreandco.com/

My second try on my yingyang soy-sauce bowl and I fell in love with it!!

While designing, it was important for me to focus on the meaning of asian numbers and modern design and to combine them with the Ying Yang.

I used 8 edges on the whole design. At the outside-top/bottem, inside, S-shape and at last on the two dots.

I hope you like it and enjoy your meal with it! :)

If you're interested in some bigger sizes, just mail me.


PS:
In the future there will be some more pictures of diffrent colours.

I've made a few changes to make the cooker easier to use. I've updated the handle and made the bottom flat so anyone could eat from it. I've added an extrusion near on the handle to stabilize the cooker in the base. Version 1 was very nice looking, and version 2 will keep most of the original design while adding stability.

It will be fun to collect every color of ceramic shapeways makes. So far I have white ceramic, avocado green, and glossy black with the other colors on their way. If you are looking to get just the cooker, here's the link.

If you want to customize this in any way please email me on shapeways or contact me via my facebook page: https://www.facebook.com/ZeroDistanceDesigns

This little cooker is designed around the lowly tealight. First meals have been with a standard tealight (38mm x 38mm x 16mm) as the heat source and safflower oil inside the cooking vessel with minced green tomatoes, Portuguese sausage, and sliced garlic. After those tasty results, I progressed to make a variety of dishes.

Tiny Dishes + other savory treats:
- roasted garlic
- cheese frying: ale cheddar, mozzerella
- melted milk chocolate
- fried bread dough
- baked a small spice cake ball
- melted marshmellow + milk chocolate for different smores variations.

other neat applications:
- Heats soy wax to 200 (need to blow out the candle at 185F) and made soy candles.

temperatures:
- heats water: 200F
- heats safflower oil: 300F

limitations:
- uneven heating causes glaze cracks. The latest design with a flattened bottom seems to prevent cracks, but the base can still get glaze cracks.

other oil tests:
- coconut oil, grapeseed oil, butter were all tested and work well.
- walnut oil was tested and I don't recommend it as the oil spattered a few feet in the air as it heated up.

What you are looking at is a 17cm x 17cm x 17cm Voronoi net of something called the Clebsch diagonal cubic surface. We are using it not for its mathematical properties per se, but to display custom jewelry at retail. For those of you who weren't able to order a sample in the White Glaze material, the print is solid and beautifully smooth, with a very high quality feel to it, completely suited to a professional display environment. Since the White Glaze material is not available right now, it is available here in White, Strong, and Flexible, including the optional colours. Learn more about this design at http://mathworld.wolfram.com/ClebschDiagonalCubic.html or visit our website at http://www.terracottapf.com

This tea-light lantern has an art nouveau styling and a mystical elven look. If you want to add some fantasy to your table setting, these are the tea-light holders to use!

These tea-light holders are extremely versatile. You can use them alone, but there something even more exciting you can do:

You can add a customizable paper lantern "hood"! Use any kind of paper you like. There is lots of patterned paper on the market. Whystler will also be publishing PDF files that you can download and print yourself, as well as an Inkscape template so you can design and print your own!

This item is a perfect way you can add your own creativity to your surroundings. Imagine a color scheme to match your decor... or your own motivational words. Special magical symbols written to enhance your mood perhaps? It's all up to you and where you draw your inspiration.

You can even paint these with sharpy markers... black .. pink .. gold ... silver ... what else? You decide.

**A Word About Wedding Use*** Several things make these holders suitable for weddings:

-great price for 3, so you can decorate all of your reception tables.

-Verstile design allows you to add personal shades that match your wedding colour scheme, and also theme. For example, if you have a daisy wedding, put daisies on the shade! Put names on the shades and you have an instant romantically lit place holder at the table.

-When things get crazy at the wedding reception, these little beauties in WSF are durable. They bounce.

-Fits nicely into a purse or coat pocket to take home as favours.

WARNING: Use of real candles is not recommended. They may get too hot for the paper or the plastic holder. Instead, use the handy dandy electrical tea-lights available at your dollar store.

A double quintal candle stand to celebrate the five ceramic colors and two finishes.
Two rings with five arms hold each other tightly.

It really shows off the very smooth quality of the new ceramics!
And yes these are actual photo's not renders!

Notes:
The bottom remains unglazed, in normal use this is not visible and even provides some grip.
Suitable for short (half length) candles with a diameter of about 22mm.
With a full length candle it is likely to topple over and would not visually match.
Please handle with care and do not to let the flame get to low/close to the stand.
I recommend to add a little wax between the candle and the stand so it sits tightly,
and/or wrap the bottom of candle with aluminium foil.

Though an obvious match for the Teabot - Hot Beverage Steeping Apparatus, this Human Refreshment Interface is also fully compatible with your favorite non-robot themed liquid dispersal methods. Currently available in either black or white glazed ceramic.

The perfect gift for all barbecue fans and steak lovers: the Texas Longhorn Toothpick Holder. This metal made bull skull holds one single toothpick at the time. The Texas Longhorn Toothpick Holder adds a nice and funny detail to your table arrangement at your next barbecue dinner.

Got a sudden craving for Monkey Brains for Breakfast? Now you can satisfy it. (Egg not included)

Contrary to popular belief, scotch whisky is best not served with ice. Ice will shut down the flavour, instead a few drops of room temperature water will open out the flavour of the whisky. Add too much and you drown the whisky! This small jug can be used to hold water for adding 'just a drop' to bring out the full flavour of your whisky. Inspired by a water droplet, this would also look nice sitting on a shelf in any home. The large hole on the side is to fill the jug, if this hole is covered with your thumb when pouring, it also helps control the water flow for maximum control of the amount of water you add!

Oslo Ceramic Coaster No.2 of 6

Set of 6 Cermic Coasters, produced and available through Shapeways. 

This project started with my fascination for city grids, from the strict geometry of New York to the seemingly chaotic Bombay layout. At the time, living abroad and a bit homesick, I decided to use the map of Oslo as a starting point for my Oslo Coasters. I picked 6 different areas in Oslo that represents different memories for me and created these products based on the city grid. The can be used seperatly or together.
 Read more about the project at http://studio-hansen.com/2011/06/18/project-oslo-2/

It's a small coffee cup whose handle is a moebius strip.
It is only attached on one side (where it is horizontal): I guess such a shape should be difficult to do without 3D-printing.
Oddly enough, it is quite ergonomic: put your thumb on the vertical part of the moebius strip, put the opposite horizontal part between your index and your medium, et voilà!

Coming soon

It''s a Yin & Yang symbol represented by two koi fishes, but since I''d like to give an option for the material also made it in one part, i didn''t set it as black and white (Yin Yang colors).
The decoration of the design was meant to be a candle holder.

Two separate but interlocked gyroid shapes
Together they form an intricate candle stand.

Suitable for candles 20-22mm diameter

Safety warning :
Please do not let the flame get to close to the material.
Best is to wrap the bottom part of the candle in a few layers of aluminum foil.

Four for sushi: All in one cup! Soy Sauce, Wasabi, Ginger & Chopstics holder for Sushi.

Oslo Ceramic Coaster No.5 of 6

Set of 6 Cermic Coasters, produced and available through Shapeways. 

This project started with my fascination for city grids, from the strict geometry of New York to the seemingly chaotic Bombay layout. At the time, living abroad and a bit homesick, I decided to use the map of Oslo as a starting point for my Oslo Coasters. I picked 6 different areas in Oslo that represents different memories for me and created these products based on the city grid. The can be used seperatly or together.
 Read more about the project at http://studio-hansen.com/2011/06/18/project-oslo-2/

Super cute mini vase! Perfect for a single flower for that someone special.

By request, a mug-sized version of the Rocket Espresso Cup. Ideal for coffee drinkers despairing of failure to launch, or for pathologically lethargic espresso drinkers. The cup should hold approximately 6-7 fluid ounces.

Please note that I have not fabricated this model yet, so I haven't had an opportunity to evaluate its ergonomics. Your mileage may vary. Conversely, if you order one, please send me a photo!

SLEEPING SALTYPUS -is a playful salt cellar from deep down under...  
The perfect addition to any kitchen ,this unique design will surely spark a conversation.

Easy to use -the Saltypus slightly tilted stature makes for easy pouring, and eight tentacles allow him to sit stable on any kitchen surface. 

To refill- simply feed your sleeping saltypus from the bottom with fine grain salt of your choice.
Each Saltypus ordered through Shapeways is individually manufactured in a super durable and high quality, 3d printed polyamide with a fine surface texture (seen in above pictures). You can also select different Colors and material options which are shown at the bottom of this page. If you are new to the Shapeways : to order, you'll be asked to create an account.  Shipping is included in the price.

Thanks for taking the time to check out my design.  I hope you enjoy it.

Also keep an eye out for a PEPPER FISH companion soon to come! 

Please feel free to contact me with any questions regarding the design: 

brysonlovett@gmail.com

Spoon design with hollow voronoi cell pattern, goes with Voronoi Cream and Sugar Set