by
bluelinegecko
A set of K-9 cufflinks made in Shapeways stainless steel. The 3-D printing process can leave small visible printing lines. While I for one really like the unique appearence of the print lines, these can easily be polished out as seen in this forum post from another member.
http://www.shapeways.com/forum/index.php?t=msg&goto=24379&
Looking for a set in polished Sterling Silver? Look here www.shapeways.com/model/228404/k_9_cufflinks_silver.html
by
bluelinegecko
A set of K-9 cufflinks in Sterling Silver. Some very fine print lines may be visible in plain silver. Items ordered in Silver glossy receive additional manual polising by shapeways. Shapeways includes a free velevet bag with all silver items.
Looking for a less expensive version or a set with a gold finish? Check out the stainless steel version here
www.shapeways.com/model/228403/k_9_cufflinks.html
by
aegidian
Chevronny heraldic design on a simple shield. Curved gently on my own design of link.
by
electrobloom
These cuff-link fittings allow the men to get involved in customising. They take any of the charms, the smaller ones work best on the cuff but you could go large, or even go for non-matching pairs, rad! They include a swivel back to easily fit any cuff.
by
Leander
Yet another cufflink I made. This one is smaller than the others but still most massive. The cube is 1,5 x 1,5 x 1,5 cm, but it's a cube, so probably a big cufflink. The twisted version exists too. I prefer keeping them seperate though. Any combination or spares can be ordered that way.
by
Ray716
Show off your steam punk side with these double geared cufflink designs.
I can not guarantee the stainless steel will print correctly. I suggest the Silver.
by
GeoBling
A pair of cufflinks, shaped like Australia including terrain! Sized approximately 15mm by 15mm with a ball-style link on the back. Select silver or silver with glossy finish from the materials dropdown.
Pendants and earrings of Australia topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/australia/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA\'s Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.'
Pendants and earrings of Australia topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/australia/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA\'s Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.'
by
UniverseBecoming
When you order you will receive a pair, so you only need to make one order. I have another design like this one, but with the traditional fixed backing and I also have a singular version.
by
GeoBling
One cufflink, shaped like Sri Lanka including terrain! Sized approximately 15mm by 15mm with a flat disk-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Sri Lanka topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/sri+lanka/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Sri Lanka topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/sri+lanka/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
ThreeFN
Here is the right handed cufflink of my Guy Man design. Image is of glossy gold material. NOTE: image is of my left handed cufflink flipped, so it’s not a ‘real’ image.
Right handed means that if this cufflink is worn on the right wrist, the 'face' will be facing forward towards the cuff.
Please Note:
There are 4 cufflinks in my store to chose from, Guy Man/Thomas, left/right sleeve. This is so you can pick the set of your choice, be it both Thomas, both Guy Man, or one of each. The 'handedness' of the model is whether the 'face' of the model faces left or right. A left sleeve model has the face towards the left, so that if worn on the left sleeve the face is towards the cuff. A right sleeve therefore faces the right for going on the right cuff. In order to have a full set you will need to purchase two cufflinks of your choice.
The image of both cufflinks is my personal set, which is a Guy Man Left in glossy gold, and Thomas Right in glossy silver.
by
GeoBling
One cufflink, shaped like Taiwan including terrain! Sized approximately 15mm by 15mm with a round ball-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Taiwan topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/taiwan/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Taiwan topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/taiwan/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
JoseAB
A couple of cufflinks representing my father's family name heraldic crest.
The coat of arms contains five Azure (Blue) Fleurs-de-lis, bordered by a double order in Argent (Silver) and Gules (Red). Engraved on the back is the family name, Arce (or Maple in english), in a Blackletter or gothic typeface.
by
JoseAB
This cufflinks bear my mother's family name crest.
The Coat of Arms contains, on top of Or (gold), a Vert (green) tree with two Sable (black) wolves leaning on it's trunk. The Azure (blue) bordure contains three Sable cauldrons.
The last name (De la Borbolla) is engraved in the back with a gothic typeface.
by
GeoBling
One cufflink, shaped like United States including terrain! Sized approximately 15mm by 15mm with a round ball-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of United States topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/united+states/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of United States topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/united+states/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
GeoBling
One cufflink, shaped like Kenya including terrain! Sized approximately 15mm by 15mm with a round ball-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Kenya topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/kenya/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Kenya topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/kenya/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
JoseAB
These Cufflinks are designed to represent the Penrose Triangle (a.k.a. Impossible Triangle).
Although being an impossible shape, this cufflinks are intended to generate an optic illusion to make the observer see the Penrose triangle when seen from the right angle.
by
GeoBling
One cufflink, shaped like Colombia including terrain! Sized approximately 15mm by 15mm with a flat disk-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Colombia topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/colombia/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Colombia topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/colombia/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
GeoBling
One cufflink, shaped like Algeria including terrain! Sized approximately 15mm by 15mm with a round ball-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Algeria topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/algeria/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Algeria topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/algeria/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
GeoBling
One cufflink, shaped like South Africa including terrain! Sized approximately 15mm by 15mm with a round ball-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of South Africa topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/south+africa/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of South Africa topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/south+africa/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
GeoBling
One cufflink, shaped like Lithuania including terrain! Sized approximately 15mm by 15mm with a round ball-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Lithuania topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/lithuania/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Lithuania topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/lithuania/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
GeoBling
One cufflink, shaped like Colombia including terrain! Sized approximately 15mm by 15mm with a round ball-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Colombia topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/colombia/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Colombia topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/colombia/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
GeoBling
One cufflink, shaped like Myanmar including terrain! Sized approximately 15mm by 15mm with a flat disk-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Myanmar topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/myanmar/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Myanmar topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/myanmar/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
GeoBling
One cufflink, shaped like Ukraine including terrain! Sized approximately 15mm by 15mm with a flat disk-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Ukraine topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/ukraine/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Ukraine topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/ukraine/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
TheProductDesignConsultancy
The PDC initial cufflinks feature a modern letter design. For the perfect personalised gift, choose any combination of letters from A through to Z. Choose the relevant initials for a great gift, birthday present or fashion accessory. Perfect for an anniversary, wedding present or Father's Day gift. This item is sold individually and not as a pair. Take a look at our full range of letters to make the perfect gift set. Select your desired material from the list. This is where you will also see an image of the colour and material surface finish in which your product will be made. For more products, visit our website www.theproductdesignconsultancy.com
by
GeoBling
One cufflink, shaped like Lesotho including terrain! Sized approximately 15mm by 15mm with a round ball-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Lesotho topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/lesotho/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Lesotho topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/lesotho/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
