by
GeoBling
One cufflink, shaped like Senegal including terrain! Sized approximately 15mm by 15mm with a round ball-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Senegal topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/senegal/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Senegal topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/senegal/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
MatterDesign
This cufflink is a regular size.
The demi size of #504 is also available.
Cumulus is a family of designed objects reminiscent of cloud formations—not only for its rhetorical appearance, but for it’s capacity to morph, adapt, and change. Clouds are often perceived to carry significance beyond their physical states. Some perceive stories or memories in clouds. While some individual items in the Cumulus family appear familiar as a known type—for instance the pearl—the same system transforms, mutates, multiplies, and evolves into a family of solutions, each producing their own identity within the large family of cloud formations.
The cufflink manifestations of Cumulus are designed to be pressure fit into a standard buttonhole. The single ball end is just small enough to pass through this hole with a concentrated pressure, while large enough not to pull out without directed effort.
by
GeoBling
One cufflink, shaped like Albania including terrain! Sized approximately 15mm by 15mm with a flat disk-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Albania topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/albania/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Albania topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/albania/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
GeoBling
One cufflink, shaped like Belarus including terrain! Sized approximately 15mm by 15mm with a flat disk-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Belarus topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/belarus/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Belarus topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/belarus/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
bluelinegecko
A set of cufflinks in the shape of a police shield made in Shapeways stainless steel. The 3-D printing process can leave small visible printing lines. While I for one really like the unique appearence of the print lines, these can easily be polished out as seen in this forum post from another member.
by
MatterDesign
This cufflink is a demi size.
The regular size of #504 is also available.
Cumulus is a family of designed objects reminiscent of cloud formations—not only for its rhetorical appearance, but for it’s capacity to morph, adapt, and change. Clouds are often perceived to carry significance beyond their physical states. Some perceive stories or memories in clouds. While some individual items in the Cumulus family appear familiar as a known type—for instance the pearl—the same system transforms, mutates, multiplies, and evolves into a family of solutions, each producing their own identity within the large family of cloud formations.
The cufflink manifestations of Cumulus are designed to be pressure fit into a standard buttonhole. The single ball end is just small enough to pass through this hole with a concentrated pressure, while large enough not to pull out without directed effort.
by
SyntheticChelovjek
Arc reactor cuff link! Order two for a set. I recommend ordering materials with high detail for this product. The diameter of the arc reactor is roughly .6", and the diameter of the retainer portion at the base is about 7/16"
by
i8kermit
Custom Hebrew monogram cufflinks. These are the letters "Hay" and "Aleph." For custom requests, message me or contact me through www.prero.com. Note: The above image is a computer rendering, for actual images of available finishes, please visit the materials page.
by
i8kermit
Yeah, you know you and your skinny jeans and Mr. Rogers sweater with the elbow patches and fixie need these cufflinks. NOTE: The above images are computer renderings, actual finish will vary from images. ALSO NOTE: I have not yet tested these, so if you order them and they fail, please let me know so I can fix them.
by
bluelinegecko
A set of Detective cufflinks in Sterling Silver. Some very fine print lines may be visible in plain silver. Items ordered in Silver glossy receive additional manual polising by shapeways. Shapeways includes a free velevet bag with all silver items.
Looking for a less expensive version or a set with a gold finish? Check out the stainless steel version here
www.shapeways.com/model/222825/detective_cufflinks__style_2_.html
Looking for a less expensive version or a set with a gold finish? Check out the stainless steel version here
www.shapeways.com/model/222825/detective_cufflinks__style_2_.html
by
Lightbringer
These have the same yin yang symbol as seen in the signet ring collection. In this case, either one will produce the exact same impression as the signet ring. One order contains a pair of cufflinks. Off-round shafts prevent rotation and keep cuff links from slipping out by accident.
Any symbol you see in the seals and signet rings collection can be converted to cuff links upon request. Please send a private message if interested.
Quality sealing wax can be ordered through our main website.
This symbol is also available as a signet ring. or as a wax seal. A smaller version of these cuff links is available as well.
Any symbol you see in the seals and signet rings collection can be converted to cuff links upon request. Please send a private message if interested.
Quality sealing wax can be ordered through our main website.
This symbol is also available as a signet ring. or as a wax seal. A smaller version of these cuff links is available as well.
by
Leander
Another cufflink! This one is a huge flatscreen. The back of the cufflink's pin features a little, simple remote control. The flatscreen is 20mm broad, which is the largest dimension of this object.
Remember that you can whish for any size of an object you like in my shop and in some short time I will contact you and probably do it.
Remember that you can whish for any size of an object you like in my shop and in some short time I will contact you and probably do it.
by
bluelinegecko
A set of cufflinks in the shape of a 6-point Sheriff's star made in Shapeways stainless steel. The 3-D printing process can leave small visible printing lines. While I for one really like the unique appearence of the print lines, these can easily be polished out as seen in this forum post from another member.
http://www.shapeways.com/forum/index.php?t=msg&goto=24379&
Looking for a set in polished Sterling Silver? Look here www.shapeways.com/model/228398/sheriff_s_star_cufflinks__style_2__silver.html
by
bluelinegecko
A set of cufflinks in the shape of a 5-point Sheriff's star in Sterling Silver. Some very fine print lines may be visible in plain silver. Items ordered in silver glossy receive additional manual polising by shapeways. Shapeways includes a free velevet bag with all silver items.
Looking for a less expensive version or a set with a gold finish? Check out the stainless steel version here www.shapeways.com/model/228395/sheriff_s_star_cufflinks__style_1_.html
Looking for a less expensive version or a set with a gold finish? Check out the stainless steel version here www.shapeways.com/model/228395/sheriff_s_star_cufflinks__style_1_.html
by
JoseAB
Inspired by one of the most iconic weapons of all times, the Death Star.
With their elliptic shafts and hemisphere studs, these cufflinks will make a perfect gift for any Star Wars geek.
by
JoseAB
The design for these cufflinks was inspired by one of the platonic solids, the Dodecahedron.
With its twelve faces - two of them being parallel to the shirt's surface - it will look great for any ocassion. Not even the point where the shaft intersects the dodecahedron makes them look odd, as it has been hollowed out with a pentagonal hole that gets smaller as it runs through the shaft.
Hollow and beautifully simple, great for any geometry fan.
by
UniverseBecoming
When you order you will receive a pair, so you only need to make one order. I have another design like this one, but with the traditional fixed backing and I also have a double sided version.
by
GeoBling
A pair of cufflinks, shaped like Australia including terrain! Sized approximately 15mm by 15mm with a plate-style link on the back. Select silver or silver with glossy finish from the materials dropdown.
Pendants and earrings of Australia topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/australia/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA\'s Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.'
Pendants and earrings of Australia topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/australia/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA\'s Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid plate-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.'
by
GeoBling
One cufflink, shaped like Argentina including terrain! Sized approximately 15mm by 15mm with a flat disk-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Argentina topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/argentina/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Argentina topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/argentina/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
scrimago
Beautiful silver cufflinks embossed with the initials AL - perfect way to show your love for Alabama
by
bluelinegecko
A set of cufflinks in the shape of a 6-point Sheriff's star made in Sterling Silver. Some very fine print lines may be visible in plain silver. Items ordered in Silver glossy receive additional manual polising by shapeways. Shapeways includes a free velevet bag with all silver items.
Looking for a less expensive version or a set with a gold finish? Check out the stainless steel version here
www.shapeways.com/model/228397/sheriff_s_star_cufflinks__style_2_.html
by
bluelinegecko
A set of Corporal chevrons in Sterling Silver. Some very fine print lines may be visible in plain silver. Items ordered in Silver glossy receive additional manual polising by shapeways. Shapeways includes a free velevet bag with all silver items.
Looking for a less expensive version or a set with a gold finish? Check out the stainless steel version here
www.shapeways.com/model/222729/corporal_chevron_cufflinks.html
Looking for a less expensive version or a set with a gold finish? Check out the stainless steel version here
www.shapeways.com/model/222729/corporal_chevron_cufflinks.html
by
GeoBling
One cufflink, shaped like Nepal including terrain! Sized approximately 15mm by 15mm with a flat disk-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of Nepal topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/nepal/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of Nepal topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/nepal/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
polsen
Nice cufflinks in the shape of a factory. Designed after the dutch industrial estate road sign.
by
GeoBling
One cufflink, shaped like United Kingdom including terrain! Sized approximately 15mm by 15mm with a flat disk-style link on the back. Select silver or silver with glossy finish from the materials dropdown. This is one cufflink only, not a pair. Combine with any other country from our selection.
Pendants and earrings of United Kingdom topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/united+kingdom/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
Pendants and earrings of United Kingdom topography are also available as separate products in our Shapeways store. You can find it (and jewelry for all other countries of the world) on our website www.printablegeography.com/united+kingdom/jewelry.
The GeoBling series of jewelry started in 2011 by the Society for Printable Geography uses data from NASA's Shuttle Radar Topography mission to create artifacts resembling the countries of the world with realistic terrain information. Our complex algorithms created by computational geometry and geodata experts can create a custom piece of jewelry for almost any country in the world within seconds.
The thickness of this cufflink is between 1mm (where the country is low) and 1.5mm (the highest peaks). A solid disk-style link (no moving parts) on the back lets you insert it to your cuff. Please contact us to order a kit of two cufflinks of the same country as a package. Also contact us if you are interested in a different size, different material, a country not currently available on Shapeways or with specific requests for dimensions.
The data used to generate this item is the “Hole-filled seamless SRTM data V4” provided by the International Centre for Tropical Agriculture (CIAT). This data is available publicly at srtm.csi.cgiar.org. The Society for Printable Geography is not afiliated with CIAT in any way.
by
bluelinegecko
A set of Detective cufflinks made in Shapeways sterling silver or stainless steel. The 3-D printing process can leave small visible printing lines. While I for one really like the unique appearence of the print lines, these can easily be polished out as seen in this forum post from another member. http://www.shapeways.com/forum/index.php?t=msg&goto=24379&
Items ordered in silver glossy receive additional manual polising from shapeways which should greatly reduce or eliminate any print lines. Shapeways also includes a velvet bag with all silver items.
Items ordered in silver glossy receive additional manual polising from shapeways which should greatly reduce or eliminate any print lines. Shapeways also includes a velvet bag with all silver items.
by
stevecim
This version has engraved "up side down V" and rivet heads.
The Idea is you can add colour later, with either Liver of Sulphur or Guilders Paste, any way you like. :)
