Purchases by those gracious customers have now paid for the design time on this piece so it is available on a pay-what-you-want basis. Ordering from this page contributes 5$ towards continuing work such as the new, even more impossible "One ring to pwn the ball" (just released October 18th!) which can be found at http://www.shapeways.com/model/145172/one_ring_to_pwn_the_ball.html and the open-source "Ultimate Desk Toy" at http://www.shapeways.com/model/109166/ultimate_desk_toy.html . To download the original 3d file for your own use under a CC-BY license ( http://creativecommons.org/licenses/by/2.5/ca ) click "Download" at top right . To learn more about this design or other work from Terra Cotta, visit our website at http://www.terracottapf.com
This piece has been released under a Creative Commons Attribution Share Alike License due to the support of the following patrons:
BJ Becker, Boon Sheridan, brepettis, Brian Hawkins, CatFord, Edvard Immonen, Edward Henderson II, GothicCharmSchool, Helen, Ian Nusbaum, Jack C, Jake von Slatt, James Ian Burns, Jess, Jezcabelle, Johnny B Jackson, Katt Tewksbury, Kim Dancy, Lastwear, Leila Smith, Libby Bulloff, Lucas Richter, Lyssa Chartrand, Malcolm Tredinnick, Marguerite Kenner, Melody Burdett, morbidity.unlimited, Nick Setten, Patrick Ball, Peter Simon, Raymond McCauley, Robert Schouwenburg, Sara Mitchell, Sigrid Ellis, strand, Sue Jackson, Theodore Minick
Because of their contributions, you are free to print this model at cost, download the original model files from my website at: http://www.improbablecog.com, use it, modify it, and even sell it, with the following restrictions:
- All derivative work must be released under the same license.
- You must attribute the original design to Noah Beasley or Improbablecog, and to the URL http://www.improbablecog.com
Also, if you do anything cool and interesting with this model, please drop me a line and let me know about it! I would love to promote your modifications, and point people your way to see it.
If you do decide to sell physical prints of this model, that's also allowed so long as you attribute the design. I would be glad to list you as a local reseller on my website as well if you let me know about it :)
That's it, otherwise have fun!
10gThough these earrings may resemble an xenomorphic sea creature, we can neither confirm nor deny that they were modeled after any organism living, dead, or bearing any blood relation to our board of directors.
These earrings are sized for 18 gauge piercings and should fit most people with pierced ears. If you need a different size, just ask! I have a few larger gauges already available in the shop, and can resize it to a custom gauge if it's not already there.
Disclaimer on the images: any photos labeled "polished" are stainless steel that has been hand polished with a dremel. The stainless that you order will have more of a texture to it. I haven't yet made these for myself in bronze glossy, gold plated glossy, or either types of silver, but if you want the highly polished look your best bet is going to be silver glossy.
Here it is straight from the artist.
More information and ordering at:
www.trompe.nl
The Scrappies - A series of originally designed small sculptures in scrap metal-look.
The body parts of the Scrappies are inspired by everything that can be found in a scrapyard: Old bolts and nuts, rusty coils, pipes, parts of ball bearings, tin cans, and more.
The figurines are worked out in minute detail, including "rust holes" and traces of an alleged "welding". The scrap metal look gives the characters their own special, irresistible charm.
Height (with stand): 18 cm
The figurines are created in the 3DP process (three-dimensional printing) from steel and bronze, from an aluminium-polyamide composite or from a gypsum-based, full-colored composite.
Products from this series are available as small, medium and large sized figurines; in white, black, colored, in steel, bronze and gold.
The figurines, while still produced by Shapeways, are not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@trompe.nl.
Here's all the parts:
+
+
+
+
+
+
+
+
I designed this for the SME Rapid 2011 trade show. The STL files are available free for use (the show logos have been stripped).
More information and ordering at:
www.trompe.nl
The Scrappies - A series of originally designed small sculptures in scrap metal-look.
The body parts of the Scrappies are inspired by everything that can be found in a scrapyard: Old bolts and nuts, rusty coils, pipes, parts of ball bearings, tin cans, and more.
The figurines are worked out in minute detail, including "rust holes" and traces of an alleged "welding". The scrap metal look gives the characters their own special, irresistible charm.
Height (with stand): 16 cm
The figurines are created in the 3DP process (three-dimensional printing) from steel and bronze, from an aluminium-polyamide composite or from a gypsum-based, full-colored composite.
Products from this series are available as small, medium and large sized figurines; in white, black, colored, in steel, bronze and gold.
The figurines, while still produced by Shapeways, are not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@trompe.nl.
More information and ordering at:
www.trompe.nl
The Scrappies - A series of originally designed small sculptures in scrap metal-look.
The body parts of the Scrappies are inspired by everything that can be found in a scrapyard: Old bolts and nuts, rusty coils, pipes, parts of ball bearings, tin cans, and more.
The figurines are worked out in minute detail, including "rust holes" and traces of an alleged "welding". The scrap metal look gives the characters their own special, irresistible charm.
Height (with stand): 16 cm
The figurines are created in the 3DP process (three-dimensional printing) from steel and bronze, from an aluminium-polyamide composite or from a gypsum-based, full-colored composite.
Products from this series are available as small, medium and large sized figurines; in white, black, colored, in steel, bronze and gold.
The figurines, while still produced by Shapeways, are not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@trompe.nl.
More information and ordering at:
www.trompe.nl
Bubble Men - A series of originally designed small sculptures in balloon metal-look.
The modeled body parts of the Bubble Men appear to be made from air balloons, frozen into solid steel, aluminium or white ceramics. The figurines are worked out in minute detail, the "balloon" appearance gives the characters their own special, irresistible charm.
Height (with stand): 13 cm
The figurines are created in the 3DP process (three-dimensional printing) from steel and bronze, from an aluminium-polyamide composite or from white, glazed ceramics.
(white ceramics not available at this time)
Products from this series are available as small, medium and large sized figurines; in white, black, colored, in aluminium composite, steel, bronze and gold.
The figurines, while still produced by Shapeways, are not available directly through Shapeways, but you can still get one! To locate the nearest store for you, to order one or to enquire about wholesale possibilities, please send an e-mail to info@trompe.nl.
