Discover » Art
This is the only Tertiant known to exist. The quadrant and sextant measure angles less the 90 degress. This astrolabe measures a full 120 degrees allowing the intrepid airship explorer to aim not only above, but also below.
Instructions: Look through the eyepiece, and line up your target with the sites (ie. north star for latitude, the top of a building or tree for altitude). When you do this, the dial will adjust itself by gravity to point out a degree on the guage. Zero is indicated by the vertical bar. Each second degree is marked by a small bar at the bottom of the guage, and these are grouped in ten degrees.
note: Before I release this for sale, I will be adding numbers on the guage, a ring at the top for hanging, and a ring on the end of the dial to hang a weight for more accurate readings.
Update:
The edges are now almost 18 cm (7 in) long and it stands about 14.5 cm (5.7 in) high.
The model has been updated because the smallest struts were a bit too small to be printed. So it's now 1.5 times bigger in all directions.
The pictures are of the previous smaller version, the new version has been ordered successfully a number of times in WSF.
I created the model using POVray and MeshLab.
Available in US ring sizes 8-13
See http://en.wikipedia.org/wiki/Ring_size for ring size reference.
Default Ring size is 9-3/4
Images shown after light polishing.
Roll a Ball on Plastic Rails Inside a 3D Cube. Reach the Exit to Solve the Maze Puzzle. Rolling Ball Maze Puzzle & Brain Game for Kids, teens & Adults.
New 3D Rolling Ball Maze Puzzle. Roll the ball inside a Plastic 3D maze
cube to the exit to solve the puzzle. New 2011 brain toy game. A Work of
Art.
Color and material options are in the "Select Material" drop-down list on
the right. If you want an option not shown or would like a quantity
discount, please click on the "Contact Designer" button to write me an
email.This pack includes the mazes listed below. Each maze includes it’s
own ball.
Escher’s Playground - Reminiscent of the upside-down staircase paintings
by Escher, this 7x7x7 maze will soon have you forgetting which way is up
and down. The dimensions of this maze are 40mm by 40mm by 40mm and the
ball is 9mm in diameter.
Floating Labyrinth - The ball appears to float through an intricately
connected matrix. What appears to be open paths are mysteriously blocked
in this 6x6x6 maze. The dimensions of this maze are 31mm by 31mm by 31mm
and the ball is 8mm in diameter.
Zig Zag Zog - You will learn to zig zag
in three dimensions to solve this 5x5x5 maze, but watch out for the
pitfalls! The dimensions of this maze are 24mm by 24mm by 24mm and the
ball is 7mm in diameter.
Start
by pushing the ball into the spring loaded entrance ( it looks like a
backwards “J”). Tip the maze in different directions to roll the ball
along the paths through the maze. Don’t worry, if you make a wrong turn,
the ball will not fall out of the maze. If the ball runs into a dead-end
you can just roll the ball back the opposite way and try another path,
that’s all part of this fun brain game. When you reach the exit there is
a spring loaded button to press to release the ball from the maze. The
exit is in a corner of the 3D maze, where you will find a bar with the
little button sticking out from the side of the maze.
Each maze game come with the ball attached by a little chain link cage for shipping. This needs to be cut off and cut open with scissors and the ball will fall out. Note that each larger size maze comes with a larger ball. The balls can quickly and easily be colored with a highlighter or marker. Let the ball dry for a minute after applying then roll between clean white paper to remove excess color so it does not rub off on the maze. Paint for plastic models can also be used. The orange, green and black balls in the pictures were colored with highlighters or markers. Coloring the ball makes it easier to track in the Labyrinth maze.
See for yourself how Ethereal
Maze Puzzles take maze puzzles to a whole new level of challenge and
fun. With their convoluted lattice structure they can also be enjoyed as
captivating and intriguing sculptural works of art.
For updates, news and reviews please visit the Ethereal Maze Puzzles YouTube channel and Facebook Fan Page
Show off these unique Works of Art in a quality display case. The medium
size case is about $3 and is perfect for "Escher’s Playground". You can
see a picture of the display case with a maze inside in the photos above.
Use the link below to get your Display Case with Free Shipping.
Medium Size BCW Maze Puzzle Display Case
If you are in the UK you can get a similar one for about GBP 5.30 with Free Shipping with the link below:
Display Case for Bare Bones for UK Customers
About a year ago, after seeing the Transformers movie, I was inspired, by the behaviour of the alien technology in the AllSpark cube, to try and design a puzzle that could expand equally in all directions. To make things even harder, I wanted each piece to be locked in place by the preceding move.
After many prototypes I finally succeeded in creating this unique sculpture consisting of six parts.
The first stage in solving the puzzle involves discovering how the pieces fit together in the expanded configuration. (One of these moves includes a rotation, which makes it much harder to crack by computer!)
The second stage is to collapse the expanded cube down to the smaller cube by pressing each of the faces in the correct sequence.
The name of the puzzle comes from a (now obsolete) alternative to the Big Bang Theory proposed by Fred Hoyle. I like the fact that from its expanded, steady state the cube can either collapse inwards or explode outwards.
© Richard Gain 2008
Theo Jansen’s 3D printed Strandbeest continues to evolve with an even more elaborate walking mechanism and a centipede-like walking motion. The latest evolution called 'Animaris Geneticus Ondularis' walks on twenty separate legs that move in a wave sequence. This new configuration results in a fluent walking motion, different from its twelve legged predecessors. It incorporates 122 moving parts, showcasing the complexity of mechanisms possible with 3D printed fabrication. It is also slightly larger than its predecessors. The operating principle of 'Animaris Geneticus Ondularis' is based on one of Theo Jansen's original beach walkers, the 'Animaris Ondula'.
Currently there is no propellor available for this version, it is being worked on though!
In the movie we used a piece of cardboard for walking on. Anything will do as long as it's a little rough for some friction!
Is inside out? Or is it not? Perhaps both?
This is an Amphora from another space-time.
An ancient object which we knew had to exist.
And after years of excavation in other dimensions we finally found it!
A very exotic vase with a unique near-impossible shape, suitable for use with dry flowers and striking enough to stand alone.
Theoretically it can also hold water in the toroidal bottom part, read practical details below.
Very suitable as a wedding gift to symbolize love and infinity.
The number eight (or sideways infinity) plays an important role in this piece,
both in the number of arms and the cross-section of this model.
Notes:
To improve print quality and after some deliberation with production, this model has been slightly updated on August 24th 2012; The arms have been thickened and the holes enlarged to improve strength and glazing.
Still I recommend not to put a lot of stress on the handles.
Refer to rendered images for the latest version. I will update photo's asap.
The bottom it stands on, is unglazed, which is invisible during normal display.
All clearly visible parts will be fully glazed, but there is a chance some parts on in the inside might not, which may compromise it's ability to hold water.
While production does their absolute best and all recent prints turned out perfectly glazed and hold water, due to the complexities involved, there is no 100% guarantee for to be absolutely watertight.
Having this remarkable and unique gadget on your desk will undoubtedly make your friends and colleagues very jealous and earn you eternal respect.
Combine Steve Jobs with the also available Steve Wozniak bust to reunite the founding fathers of Apple on your desk.
Watch the YouTube video
Read at the Shapeways Forum
Read more at the Twisty Puzzles Forum
These are just the four special pieces. If you want to buy the full puzzle, assembled and sticked, then search the internet for Mefferts and "Gear Cube Extreme".
Perfect as a special gift for your beloved one.
If you want silver version, head over here : Silver Blossom Heart
The Animal Head Collection.
No 1 is a Stag head.
There is also a 75mm version here and a 300mm version here
No 3 is a Rhino.
No 4 is a Tiger.
5 is an Elephant.
I'm experimenting with telling a story using minimal material to save on printing cost while inspiring the imagination. The Zebra head works well, I've concentrated on only printing the black parts leaving the white empty. It is available in BSF and WSF. Both materials tell a different story.
Please send your pictures and share your thoughts on the design.
All segments are thin mobius strips, and they weave and interlock perfectly through the spaces left between them. Highly complex, and a headache to look at, yet it possesses an inherent mathematical simplicity and beauty.
This model is 3d printed out of a sintered vinyl plastic, which makes it very resilient and bendable. It won't break if you drop it.
Please note that you must order TWO SETS to create the cube – each set includes two figures and four are necessary to create this sculpture. The figures are identical and snap together tightly hands to ankles to make this striking sculpture. Mix and match colors for your own effects. Or order more than two sets to experiment with other configurations.
This model is being exhibited at the Center for Arts Gallery at Towson University, June 30-July 28, 2012.
To learn more, visit our website at http://www.terracottapf.com
---
Billina showed her the place where she had "stubbed her bill," as she expressed it, and Dorothy dug away the sand until she felt something hard. Then, thrusting in her hand, she pulled the thing out, and discovered it to be a large sized golden key--rather old, but still bright and of perfect shape.
"What did I tell you?" cried the hen, with a cackle of triumph. "Can I tell metal when I bump into it, or is the thing a rock?"
"It's metal, sure enough," answered the child, gazing thoughtfully at the curious thing she had found. "I think it is pure gold, and it must have lain hidden in the sand for a long time. How do you suppose it came there, Billina? And what do you suppose this mysterious key unlocks?"
From Ozma of Oz by L. Frank Baum
Full text available at http://www.gutenberg.org/etext/486
[Emerald not included.]
This is a little delicate as the lines are 1.5mm thick, but it seems sturdy enough.
This die has 18mm sides with 7mm tall numbers and 1.2mm stepping.
See also; http://www.shapeways.com/model/158405/stepped_die_d12.html?gid=ug43177 a D12 featuring stepping under the center of the numbers.
This model does not print perfectly. Shapeways will do their best, which is darn good, but the smallest holes must be cleared by hand, and it takes time.
Enjoy, but please read the comments below before ordering.
Other sizes:
www.shapeways.com/model/231026/knotted_cog__large_.html
www.shapeways.com/model/231045/knotted_cog.html
www.shapeways.com/model/277265/knotted_cog__smaller_.html
www.shapeways.com/model/232385/knotted_cog__small_.html
Here they are shown in the "White Strong & Flexible" material, but are also available in other colors as well as silver. They are each about 1.5 inches long and .75 inch wide.
See also: http://www.quirxi.net/misc/lizard_tutorial/index.html.
