http://www.shapeways.com/forum/index.php Shapeways: Bring your creativity to life in 3D http://www.shapeways.com/forum/index.php?t=rview&goto=50130&th=9951#msg_50130 LOOK BELOW]]> olavxxx 2012-06-20T21:16:41-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=50152&th=9951#msg_50152
I read on the material page that I cant have such thin walls on the metal printing, so I have a revised idea. Instead of sleeving from the inside, I can sleeve from the outside with metal.
The inside I can either fill the gap with liquid polyurethane and use the M12 bolt to get it smooth. Or I could use a very simple 3d printing in strong and flexible polished.

The revised idea is to get the sleeves on the outside of the flanges on this bushing:
http://www.qa1.net/qa1_motorsports/drag-and-street/suspensio n-accessories/shock-mount-accessories/bearing-kits.html

It's a tad complicated to explain, so I will mspaint it.
If someone wants to quote me the design (personal use). I could also use an "internal" sleeve with OD: 13mm, ID. 12MM and length: 25mm.

OUTER DIAMETRE 20mm for the one in the picture]]> olavxxx 2012-06-21T17:15:07-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=50169&th=9951#msg_50169 CADNinja 2012-06-21T23:18:02-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=50172&th=9951#msg_50172 this ? ]]> pfeiffer stylez 2012-06-22T00:23:06-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=50237&th=9951#msg_50237 I also managed to make it my self quite easy. After 10 mins I could do the basics of sketchup. Did some mistakes on the size, but this has inpired me to learn more.

I've sent a beer to pfeiffer stylez as thanx.

This is my model


The model from pfeiffer stylez is smoother (and the correct size). Anyhow, I have what I need now Thanks again, pfeiffer stylez!

Bier zeit!]]> olavxxx 2012-06-22T21:15:45-00:00