http://www.shapeways.com/forum/index.php Shapeways: Bring your creativity to life in 3D http://www.shapeways.com/forum/index.php?t=rview&goto=45326&th=8553#msg_45326
Now the Question is, How the model is uploaded and saved upon which axis is the way it is printed, or does shapeways rotate my model to fit in more objects into one printing session?

If not then I just need to adjust my files, please let me know from which axis it prints from bottom to top, and if so, then is it possible to request that rotation is not allowed or at least have a say in which rotation? My dolls are expensive and I can not buy reprints on which the model was not printed as cleanly. And yet I do not want to send my clients dolls that look unclean or unfinished.

I have tried detail materials but it is brittle and breaks easier, so all of my dolls have been printed using WSF.


Anyone else have this problem? I notice one side of the printing is smooth and the other is very layered looking.

Thank you, I would really appreciate a quick reply on this.]]> Silverbeam 2012-03-11T19:28:21-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=45331&th=8553#msg_45331
If you'd like to make this a higher priority, you can add your vote on the User Voice thread here:

http://feedback.shapeways.com/forums/111989-shapeways-feedba ck/suggestions/2543810-specify-print-orientation


]]> aeron203 2012-03-11T19:58:40-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=45332&th=8553#msg_45332
http://feedback.shapeways.com/forums/111989-shapeways-feedba ck/suggestions/2543810-specify-print-orientation

However, what good that does, I do not know. I would love a definitive answer as to whether Shapeways are genuinely considering this option or not in the future. If I order a crate of apples, I don't want half them to be oranges. Worse again if I advertise apples, and my customers receive oranges, without my even knowing.]]> Bunrattypark 2012-03-11T20:17:00-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=45335&th=8553#msg_45335
come on shapeways, this seems like a no brainer option that should have been implemented day one.

]]> Silverbeam 2012-03-11T21:29:14-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=45340&th=8553#msg_45340 Silverbeam wrote on Sun, 11 March 2012 21:29
So even if I change the orientation of my object and upload, it is no guarantee?

come on shapeways, this seems like a no brainer option that should have been implemented day one.



Your preferred orientation is not necessarily the most economic orientation.
There's is a reason why you pay just for the volume.

There are other 3D print services which offer control about the print orientation.
You'll have to pay for the material, plus a fee depending on the height.
Of course, usually they're much more expensive than Shapeways...
]]> pfeiffer stylez 2012-03-11T22:00:50-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=45342&th=8553#msg_45342
But this is good business, and these are good customers. What is not understood is why Shapeways won't even make a business offer for those who need specific print orientation.

Don't Shapeways want to keep all those customers? It seems like quite a lot of people.]]> Bunrattypark 2012-03-11T22:31:18-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=45447&th=8553#msg_45447
Frankly I do not wish to see the service compromised by people who haven't understood that Shapeways produce, essentially, semi-finished items. While for some, functional, things the finish is not really important, but for anything that has fine detail or where the surface finish is important then I really don't see why anyone one would expect not to have to finish the items themselves.

There are plenty of other companies out there who are willing to supply items with whatever orientation or surface finish is specified, but none of them will come anywhere near Shapeways' prices.]]> BillBedford 2012-03-13T22:02:49-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=45521&th=8553#msg_45521
All we want is to know. At the moment, it seems to be a hope of if they ignore us, we might go away. They've already lost a ton of my work, as my shop has been on hold for the past four months, and my customers keep asking when will my models be available again. I have another manufacturer lined up. The ball is in Shapeway's court.]]> Bunrattypark 2012-03-14T22:45:27-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=45549&th=8553#msg_45549 Bunrattypark wrote on Wed, 14 March 2012 22:45
Well, there's 82 votes for it at the last count. That's 82 votes for Shapeways to consider it, let us know if they are considering it, and if so, what price they might put on the privilege.

Out of how many users exactly?

Quote:

All we want is to know. At the moment, it seems to be a hope of if they ignore us, we might go away. They've already lost a ton of my work, as my shop has been on hold for the past four months, and my customers keep asking when will my models be available again. I have another manufacturer lined up. The ball is in Shapeway's court.

BLUFF

If you had really found another company that could come close to matching Shapeways' prices you would be off there like a shot.
So how much extra is this other manufacturer going to charge you?

]]> BillBedford 2012-03-15T09:29:37-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=45570&th=8553#msg_45570
I am presently making small adjustments to my drawings to suit another manufacturer's requirements. A friend already had success with them, at a reasonable price, not too much dearer than Shapeways. I hope to have prototypes sometime in April. I am aiming for a public show end of April. In the meantime, I see no reason not to push Shapeways on a number of issues, to see where they might go with them.

All I am asking Shapeways right now, is whether they are considering offering specified print orientation in the future, or whether they are not. Simple question. Yes or No.]]> Bunrattypark 2012-03-15T20:01:51-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=45573&th=8553#msg_45573
Yes, print orientation is something Shapeways will address in the future, we do not have a date at the moment.

Thanks for your patience and good luck with all of your prints.]]> duann 2012-03-15T21:20:14-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=45576&th=8553#msg_45576 ]]> GlenG 2012-03-15T22:17:07-00:00