http://www.shapeways.com/forum/index.php Shapeways: Bring your creativity to life in 3D http://www.shapeways.com/forum/index.php?t=rview&goto=48527&th=9541#msg_48527 jeff 2012-05-16T13:06:39-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48526&th=9546#msg_48526

http://www.youtube.com/watch?v=WP8mNJBE0UQ]]> kiorodesign 2012-05-16T12:53:46-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48525&th=9543#msg_48525
Thank you for the feedback. ]]> kspaho 2012-05-16T12:36:42-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48524&th=9545#msg_48524
We want it to pop out by 1.5" (3.81 cm)





-]]> CompuCated 2012-05-16T11:02:38-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48523&th=9543#msg_48523
Do you see a problem with liquid or food being stuck or inaccessible beneath the tunnel?]]> bradycustom 2012-05-16T10:51:10-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48522&th=9544#msg_48522 http://www.shapeways.com/forum/index.php?t=rview&goto=48 490#msg_48490]]> Relaxis 2012-05-16T09:53:10-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48521&th=9544#msg_48521
I use Poser to get my base mesh and then I export to Zbrush, use subtool extraction and then usually I go to Subtool master and merge all, deleting the old subtools. Then I export the merged mesh as an stl in 3d print exporter.

SO far I've had mixed results, half of my models have no problems after being fixed in netfabb and others cannot be fixed - "surface not orientable" in netfabb and shapeways errors produce "mixed winding triangles" errors.

After one of the moderators looked at my model that I was having problems with he said that there were holes in the face from the teeth and that all the clothing meshes were seperate from the base mesh and they needed to be booleaned together - little help? ]]> Relaxis 2012-05-16T09:47:56-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48520&th=8109#msg_48520 ready to be released at least as a Release Candidate.
[...]
http://marcoalici.wordpress.com/2012/05/15/raspberry-pi-case -1-0rc1/

]]> MarcoA 2012-05-16T09:20:58-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48519&th=8321#msg_48519 (Might take a few hours till US wakes up)

So far it seems like an honest (but stupid ) mistake in payments.
And it looks like the new front-end has some minor issues, which I am sure will be fixed very soon.

But so far I have seen no sign that the order overview figures would be wrong.

And rest assured, in my 3 years as shop owner, all inconsistencies have ALWAYS been solved to full satisfaction.

Let's try to see it as growing pains?
(going from tens/hundreds of shop owners and (manual) payments to automated thousands(?) requires system upgrades )

And as far as I can tell, payments were made on the 15th ? (US time)

Cheers,

Stijn

]]> virtox 2012-05-16T09:10:12-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48518&th=8321#msg_48518 tebee 2012-05-16T08:59:10-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48517&th=9454#msg_48517

]]> stop4stuff 2012-05-16T08:11:02-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48516&th=9454#msg_48516
I would go for the bigger hand that already looks like it's holding something, so it would hang like the purple one in the picture.]]> Wahtah 2012-05-16T08:06:39-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48515&th=8321#msg_48515 virtox wrote on Wed, 16 May 2012 06:42
I got the exact same amount as last month, anyone else?





Yep


]]> stop4stuff 2012-05-16T08:05:45-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48514&th=8321#msg_48514

This was supposed to be paid on the 15th, it was a day late.

The numbers are supposed to be correct, but the amounts which have been paid are different to the numbers.

This whole system system seems to have broken down, I have little trust anymore even in the spreadsheet, the rest of the numbers in the new calculator are wrong, the amounts paid are wrong and the payment is late.

I much prefered the old Shapeways 3 years ago, sure it was simpler, but it WORKED which as a customer/co-partner with a shop was all that mattered to me.

The worst thing you can do when you have an issue like this is start giving out dates for when things will be corrected, with anything like this you can get unknown spanners in the works and missing a deadline you have set reduces trust and moral.

Kindest Regards,

Jack]]> B1lancer 2012-05-16T07:45:33-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48513&th=8321#msg_48513
]]> robo3687 2012-05-16T06:59:32-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48512&th=9513#msg_48512
I have just sent you an email about this. Could you please respond to this so we can solve this as soon as possible?

Thanks!]]> ChristelH 2012-05-16T06:48:36-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48511&th=8321#msg_48511

]]> virtox 2012-05-16T06:42:54-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48510&th=9454#msg_48510
Yes I appreciate what you're saying and that the materials might not share the same final dimensions down to the differing manufacturing processes... but I'm intrigued by the possibilities and if it takes a little trial error, then that's part of the fun I suppose.

@emielrombach, yes Escher is good inspiration for many creators on Shapeways - my little lizard suited my skill level (ie basic), the software (Sketchup) and budget!

I'd be interested to see what you have, but the link you put in isn't working... try going into Edit mode on your model, then check the 'Show to Public' box (or whatever it's called... I don't recall the exact wording...) then update.]]> mygadgetlife 2012-05-16T06:17:16-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48509&th=8321#msg_48509

I didn't get what I was expecting & payment due for next month is showing more than double what it should be, and that payout will be a month too late for what the money was intended for.

]]> stop4stuff 2012-05-16T05:18:41-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48508&th=8321#msg_48508
Past Sales table is a bit messy anyway, with no real table lines and all kind of formating issues pushing numbers around.]]> stannum 2012-05-16T03:46:51-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48507&th=9543#msg_48507
In response to the :
A Beautiful New Palette of Colors for Your Ceramic 3D Printing at Shapeways, I have come up with an idea that would accompany it really well. After taking some ideas from "breathable roots" and some from the "plateless espresso cup", I cooked up the following:

Has Anyone Seen my Spoon?

]]> kspaho 2012-05-16T03:44:12-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48506&th=9542#msg_48506
Each model consists of a pair of polyhedra connected to each other at the center of each of their faces. The connection is not readily apparent, and gives more of an impression that the inner shape is floating.

model pages:
double dodecahedron
double icosahedron
double bucky







]]> vertigopolka 2012-05-16T03:24:11-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48505&th=9538#msg_48505 CADNinja 2012-05-16T03:13:31-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48504&th=9541#msg_48504
The 16 triangles started out as two octahedrons of different sizes. The faces have been separated and rotated so that the vertices of each of the smaller triangles touch a vertex of one of the larger triangles.

I termed the one piece a duality cube because it's a cube that has undergone a dual loop style remesh with a twist, along with a few other steps.

model pages:
16 triangles silver
duality cube silver







]]> vertigopolka 2012-05-16T03:10:56-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48503&th=9540#msg_48503
Since these were separate orders, I have paid equal amount of shipping fee twice. If I don't have to pay shipping, I have no complain. And even worst, both these orders were late if I refer to the original expected delivery dates.

And for those who is going to suggest me to contact CS, I did, and I'm waiting for the response. But nothing will change the late delivery dates.]]> CGD 2012-05-16T03:05:24-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48502&th=9537#msg_48502 lensman wrote on Wed, 16 May 2012 01:04
Okay, just to set the record straight before I get something started here; this was a tongue-in-cheek post because my wife loves popping bubble-wrap and she just sat down with my last model package and one pop and the whole thing was flat! She was very disappointed!

Glenn



I can't claim to have a wife, but I can claim the same disappointment.]]> TurtlesAreCool 2012-05-16T02:59:22-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48501&th=7910#msg_48501 7PLAIN 2012-05-16T02:23:46-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48500&th=9539#msg_48500
view more detail at http://shpws.me/6eJd]]> 7PLAIN 2012-05-16T02:12:39-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48499&th=9537#msg_48499
Glenn
]]> lensman 2012-05-16T01:04:03-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48498&th=6027#msg_48498

I'm sitting here in NZ looking at a cart breakdown that shows:

Your Items : $9.97
Shipping : $19.99

We don't have the crazy UPS charges that Canadian users have to put up with but that is a massive shipping charge for a 23gram part is it not? (It would only cost an additional $103 to launch said part into low earth orbit on a Soyuz rocket) Do shapeways parts come in a giant box filled with very heavy packing material or am I going to get a bubble wrap lined courier bag to add insult to injury?]]> bostwickenator 2012-05-16T01:01:44-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48497&th=9538#msg_48497 thank you!]]> Chrishh11 2012-05-16T00:57:19-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48496&th=8321#msg_48496
instead of showing a "march 16 '12 - april 15 '12" and "april 16 12' - may 15 '12" it seems to have lumped both payments into a single payment designated "nov 16 '11 - may 15 '12" that will be paid on june 15th....

but its a minor issue as the figures do seem to finally be correct and the issue seems to be how they're displayed...

also should say I'm quite happy with how this has been handled with shapeways finding and planning on paying lost sales and dealing out gift cards to affected stores...

]]> robo3687 2012-05-16T00:29:36-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48495&th=8321#msg_48495 tebee wrote on Wed, 16 May 2012 00:12
Are you you guys still working on this ? The figures I'm seeing on the new mysales page seem to be not only wrong but changing when I go back.

It's currently showing nothing due in may but a rather nice large figure due in June.

Tom


To add (I think the page refreshed a few moments ago), the figures are now showing sales for two months (under Sale Date: Mar 16 '12 - May 15 '12; Payment Date of Jun 15 '12...) quite a sum but sadly had to face reality of it being two months

Cheers!
-RoeT]]> matt_atknsn 2012-05-16T00:24:46-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48494&th=8321#msg_48494
It's currently showing nothing due in may but a rather nice large figure due in June.

Tom ]]> tebee 2012-05-16T00:12:20-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48493&th=9537#msg_48493 johnnylingo 2012-05-15T23:29:43-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48492&th=9218#msg_48492
Good news! We've been hard at work on a long-term solution to ensure you have full visibility into your shop payments, and today we launched a major update to the shop payments page. You now have a full, clear history of how much you've made with your Shapeways shop, what payments are currently pending, and what sales you've made in the current transaction period. Moreover, you'll be able to see this info broken out according to payment status and date, order information, markup, and total payment. You can read all about the details on the "how we pay" page
In the process, we unearthed a few discrepancies and have emailed the handful of users affected individually.

We've tested this with a few of you already and hope that this is a far more intuitive way to get an accurate picture of your shop finances. As always, we welcome any and all feedback (In this thread). We'll also be sending you this information by email, so you can you share your thoughts there as well.

As we've said in the past, your shop finances are our top priority. We know that accounting is rarely a cup of tea, so this is one step of many we plan to take to improve the insights and information you have about your Shapeways shop.

Best,
Carine]]> carine 2012-05-15T23:13:35-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48491&th=9537#msg_48491
Glenn]]> lensman 2012-05-15T22:18:10-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48490&th=9527#msg_48490 stonysmith 2012-05-15T22:12:08-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48489&th=9486#msg_48489

Durer Alphabet - A - v1v2v3v4
http://www.shapeways.com/model/572363/

Study for a series that will include all letters in the Durer Alphabet.

V1 is to use as a pendant with a lanyard looped on a circle.
V2 - is to link several letters horizontally and vertically using split "O" rings.
V3 - is to link several letters vertically in a pendant, using split "O" rings.
v4 - is to link several letters horizontally in a bracelet, using split "O" rings.

]]> opresco 2012-05-15T21:51:34-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48488&th=9486#msg_48488

Durer Alphabet - A - v1v2v3v4
http://www.shapeways.com/model/572363/

Study for a series that will include all letters in the Durer Alphabet
V1 is to use as a pendant with a lanyard looped on a circle.
V2 - is to link several letters horizontally and vertically using split "O" rings.
V3 - is to link several letters vertically in a pendant, using split "O" rings.
v4 - is to link several letters horizontally in a bracelet, using split "O" rings.]]> opresco 2012-05-15T21:45:03-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48487&th=9527#msg_48487
How did you close the holes? Did you use netfabb basic or professional? How would I boolean the meshes together in the most simple way? ]]> Relaxis 2012-05-15T21:25:11-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48486&th=9533#msg_48486 -G]]> GlenG 2012-05-15T21:21:24-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48485&th=9502#msg_48485 -G]]> GlenG 2012-05-15T21:14:50-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48484&th=9527#msg_48484
Your model includes separate meshes for the clothing apart from the body itself. There is also quite a bit of detail inside the mouth behind the mask.. teeth??? This is not necessary.. you should attempt to boolean together all the meshes so that you have only a single final mesh. That will drastically cut down your filesize, and help with some of the other issues you're having.

]]> stonysmith 2012-05-15T21:14:08-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48483&th=9191#msg_48483 I only changed some dimensions of the dodecahedron to match the size of this coin.
Please welcome the DodQuarter:


]]> Magic 2012-05-15T21:07:58-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48482&th=9421#msg_48482 Maximed 2012-05-15T20:57:05-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48481&th=9534#msg_48481 stonysmith 2012-05-15T20:54:38-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48480&th=9487#msg_48480 Maximed 2012-05-15T20:51:01-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48479&th=9506#msg_48479 http://www.123dapp.com/ seeing that you are an AutoCad user.
]]> JACANT 2012-05-15T20:46:07-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48478&th=9527#msg_48478
I would love to be able to PM you the file however it is about 60 mb large, i'll PM you a download link. ]]> Relaxis 2012-05-15T20:23:05-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48477&th=9534#msg_48477
Glenn
]]> lensman 2012-05-15T20:01:32-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48476&th=9534#msg_48476
I think with the new dynamically updating site, some changes do take a few minutes.]]> natalia 2012-05-15T19:49:50-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48475&th=9527#msg_48475 I'll take a look.]]> stonysmith 2012-05-15T19:45:15-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48474&th=9527#msg_48474 Relaxis 2012-05-15T19:06:47-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48473&th=9533#msg_48473 http://anthemsanchors.com/my-story/

Glenn
]]> lensman 2012-05-15T18:54:45-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48472&th=9379#msg_48472 Wish I could model my own jewellery but earrings wouldn't look so good on my old mug!

Glenn
]]> lensman 2012-05-15T18:37:45-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48471&th=9454#msg_48471
Glenn
]]> lensman 2012-05-15T18:27:10-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48470&th=9536#msg_48470
A long time ago, I designed the DodBox (see also this thread).
I wanted to do something similar for Ceramics for a long time. The new colors for ceramics have been the right opportunity to do it now.
So here it is, the DodBox in Ceramics:

This is a rounded version, also inspired by the Truncated Sphere D12.
It is quite thick so the box can (hopefully) be closed, and as the original one, it is stackable (more renders on the product page).
I am curious to see how it works, and I'd like to mix the colors...

]]> Magic 2012-05-15T18:25:39-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48469&th=7731#msg_48469
Yes, as noted above you have to get the item shipped to you and then ship it to the customer. For me this REALLY kills profit and sales. Factoring in the outlandish fees I have to pay UPS at the door and then more cost to ship the product just doesn't result in a lot of sales. I can hand make a piece of jewellery in pure silver (which I do) and sell it cheaper than a piece in sterling silver that I've had made on Shapeways....

Of course, if you are selling something really unique looking it's a bit easier to charge more since it can't be purchased elsewhere. BUT with that in mind don't sell a piece on Etsy for $100 AND sell the exact same piece in your Shapeways store for $45.... Your Etsy customer is gonna get real mad!

Glenn]]> lensman 2012-05-15T18:22:33-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48468&th=9531#msg_48468 Buzzmodels 2012-05-15T18:14:04-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48467&th=9535#msg_48467
Da hier überwiegend auf Englisch kommuniziert wird, und sich vielleicht nicht jeder jemanden auf Englisch anschreiben traut, dachte Ich mir, Ich mach mal einen thread für Deutschsprachige auf!

Mache für kleines Geld sachen aller Art im 3D-Konstruktions Sektor, derzeit vorwiegend im Modellbau tätig wie man in meinem Shop sehen kann!

mfg
mastachief90]]> mastachief90 2012-05-15T18:03:37-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48466&th=9533#msg_48466 stonysmith 2012-05-15T17:56:49-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48465&th=9509#msg_48465
Glenn
]]> lensman 2012-05-15T17:49:18-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48464&th=9534#msg_48464
Can you be a bit more specific please? Where are the big black letters appearing? Are you seeing this in edit mode?

If you are UNchecking 'Display to Public' you actually don't want it to be available, so I'm not clear as to why "This model is no longer publicly available" is confusing.

I am just trying to replicate what you see so we can fix it...

Thank you!]]> natalia 2012-05-15T17:26:54-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48462&th=9527#msg_48462 Relaxis 2012-05-15T17:21:16-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48461&th=9532#msg_48461
In addition, the model is already at 38cm3 of material. By the time you thicken it up to 3mm thick, you're going to be somewhere above 550cm3 of material, with a cost well above $4500.00]]> stonysmith 2012-05-15T17:05:07-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48460&th=9534#msg_48460

You guys are killing me....

Now, when I'm logged in and viewing my own models, every single model that is unchecked "Display to the Public" has a nice black sign with white lettering saying that "This model is no longer publicly available"

Clicking on the model itself some will open up and show the model others just show an even bigger black sign.

A real mess.... and on top of that the models that do appear STILL don't show the most recent model upload...

Glenn
]]> lensman 2012-05-15T16:59:03-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48459&th=9531#msg_48459 known shapeways compatible software. Try out Sketchup and 123D as they are very easy to learn software, and quick to pick up and go with. They're also free!]]> Youknowwho4eva 2012-05-15T16:58:15-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48458&th=9218#msg_48458
Just a quick update: We ARE paying all shop owners today!

We have been working hard to make sure everything is correct and since this is the first month we are moving from a manual to an automatic system, we want to triple-check that everything is right.

Rest assured, you will see money in your paypal account shortly, it's just a matter of a few hours. With this payment, we are rolling out a more transparent system which we think you'll love, so stay tuned for details!

Thank you for your patience

Best,
Natalia]]> natalia 2012-05-15T16:56:51-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48457&th=9533#msg_48457
While I certainly wouldn't deliberately design the lettering this size again I'm quite happy that it printed almost 100% correctly. The pendant is 2" in height.

Glenn

]]> lensman 2012-05-15T16:47:01-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48456&th=9531#msg_48456 Buzzmodels 2012-05-15T16:44:34-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48455&th=9532#msg_48455
Check out the stainless steel material page

http://www.shapeways.com/materials/stainless_steel

and design rules

http://www.shapeways.com/design-rules/stainless-steel

Wall thickness should be 3 mm or over

Best of luck]]> duann 2012-05-15T16:24:09-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48454&th=9532#msg_48454 This is first time for me to work with the 3d printing with metal.
So, please give me some advices on my designs.
(find the attached file)
It is a hollow toroid with the 0.2mm wall thickness.
And there are spacing holes on the surface.
And the adjacent parts are supported 1mm wide bridges.
Do you think this design is feasible with the stainless steel printing?
Furthermore I want to plate copper on the printed stainless steel.
Do you think it is okay for plating copper? (I'm totally new to 3d printing and plating).
Please give me some hints.
Regards,
Seung H Lee]]> seungh_lee 2012-05-15T15:43:18-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48453&th=9513#msg_48453
As volunteer moderator I have tried my best to help you.
And as I have explained this is not the usual order of things but a case of bad timing.

And this afternoon, I checked in on you via PM as I know people are working on your issue, but wanted to make sure things went ok, this is your response??

I think this is uncalled for and unlikely to help you any further.

Cheers,

Stijn
]]> virtox 2012-05-15T15:38:53-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48452&th=9531#msg_48452 What scale do you primarily work with?]]> stonysmith 2012-05-15T15:38:13-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48451&th=9513#msg_48451 Youknowwho4eva 2012-05-15T15:16:39-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48450&th=9514#msg_48450 Youknowwho4eva 2012-05-15T15:13:35-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48449&th=9531#msg_48449 My name is Andrew Evans and I run a very small model railway business. I have been shown the world of 3d printing and am looking at getting kits produced this way. ]]> Buzzmodels 2012-05-15T15:11:39-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48448&th=9514#msg_48448
just to warn other peopple this is a stinking company, take care before you choose this as a partner.]]> kelderkold 2012-05-15T15:03:49-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48447&th=9513#msg_48447
24h service they say

Still no money back, now it is 8 days
thats 200 hours now

If you have a nother printing service use that, shapeaways stinks.

I hope they are giving me interest of my money


]]> kelderkold 2012-05-15T15:01:51-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48446&th=9514#msg_48446 other thread you started, Christel (member of CS) has replied to you, with instructions on what to do.]]> Youknowwho4eva 2012-05-15T15:00:50-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48445&th=9530#msg_48445
>>>>>>>>>>DNA FLOWER PENDANT
>>>>>>>>>>Also see embedded YouTube movie
>>>>>>>>>>http://www.shapeways.com/model/109921/

]]> opresco 2012-05-15T14:59:42-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48444&th=9514#msg_48444

Still no money back, now it is 8 days
thats 200 hours now ]]> kelderkold 2012-05-15T14:58:17-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48443&th=9529#msg_48443
My name I Stuart, i currently use Sketchup to create parts for 1:24 scale model emergency vehicles. Mostly i build Fire Engines, but i have been known to dabble in sci-fi models.

Thanks, Stuart
]]> BigStu13 2012-05-15T14:50:43-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48442&th=9527#msg_48442
Perhaps someone can help you fix the problem closer to the source?
What software did you use to create it?

Cheers,

Stijn
]]> virtox 2012-05-15T14:46:04-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48441&th=9527#msg_48441 Relaxis 2012-05-15T14:41:40-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48440&th=9519#msg_48440 And, I greatly admire your work, indeed!

Best,
Ovidiu]]> opresco 2012-05-15T14:24:25-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48439&th=9528#msg_48439 http://boingboing.net/2012/05/01/3d-printed-electromechanica l-c.html


]]> virtox 2012-05-15T14:15:52-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48438&th=9527#msg_48438
I am not very familiar with netfabb basic, so cannot help you with that, but did you try the netfabb cloud option?

Cheers,

Stijn]]> virtox 2012-05-15T14:10:25-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48437&th=9519#msg_48437

Love your designs! And good to have you on the forum!
You'll be Senior member in no time!

Cheers,

Stijn]]> virtox 2012-05-15T14:05:24-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48436&th=9520#msg_48436
No, it is not an award, even though it could very well be.
It is a monumental sculpture, 29.35 meters high, my tribute to the father of modern art.
And, since this is one of the most important projects of my life I'd appreciate it if you'd do a little more homework on this

ENDLESS COLUMN 2012 - HOMAGE TO BRANCUSI
See embedded YouTube movie
http://www.shapeways.com/model/504635/

Google Doodle Shows Off Sculptures of Constantin Brancusi
Brancusi is considered one of the fathers of modern art. using simple earthen materials like wood and stone to create elegant yet avant-garde designs.
Read more: http://newsfeed.time.com/2011/02/19/google-doodle-shows-off- sculptures-of-constantin-brancusi/#ixzz1uwVFFxoY

Brancusi Endless Column
https://www.google.com/#hl=en&q=brancusi+endless+column& amp;revid=1017905991&sa=X&psj=1&ei=QlCyT7LyOc636 QHD0cmxCQ&sqi=2&ved=0CCoQ1QIoBQ&bav=on.2,or.r_gc .r_pw.r_cp.r_qf.,cf.osb&fp=61fe8c406b329c8c&biw=1018 &bih=861

Constantin Brancusi
http://en.wikipedia.org/wiki/Constantin_Br%C3%A2ncu%C8%99i
]]> opresco 2012-05-15T13:47:58-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48435&th=9524#msg_48435 Günter Art & Design 2012-05-15T13:12:53-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48434&th=9527#msg_48434
I used the automatic repair function on netfabb and replaced the part. After this is all done I basically get the same issue as before - red spots all over the model. I've tried running the flip triangles script and I just can't get it to work.

]]> Relaxis 2012-05-15T12:37:07-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48433&th=9520#msg_48433 Youknowwho4eva 2012-05-15T12:35:31-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48432&th=9524#msg_48432 Youknowwho4eva 2012-05-15T12:33:38-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48431&th=9483#msg_48431
Could remove my email address from your post please? That information was intended to be private, not for web-crawling spambots.

As for your question on price: I charge some extra for the dyeing, assembling, stickering and additional shipping. So the cheapest option is to buy the DiY kit from Shapeways.

Best regards,

Oskar]]> Oskar_van_Deventer 2012-05-15T12:11:47-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48430&th=9483#msg_48430 Oskar_van_Deventer wrote on Tue, 15 May 2012 10:16
Dear Josheppaul,

Thank you!

You can buy the puzzle as a DIY kit in my shapeways shop here
http://www.shapeways.com/model/522828/paso_doble.html
(press "add to cart")

You can also buy a fully assembled sample from me directly.

Oskar


Thanks for these useful information. I will definitely go there and I hope I can get useful things there. One more thing is that the price will be informed there?]]> josheppaul 2012-05-15T11:13:13-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48429&th=9525#msg_48429 7PLAIN 2012-05-15T10:54:26-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48428&th=9474#msg_48428 7PLAIN 2012-05-15T10:50:37-00:00 http://www.shapeways.com/forum/index.php?t=rview&goto=48427&th=9483#msg_48427
Thank you!

You can buy the puzzle as a DIY kit in my shapeways shop here
http://www.shapeways.com/model/522828/paso_doble.html
(press "add to cart")

You can also buy a fully assembled sample from me directly.

Oskar]]> Oskar_van_Deventer 2012-05-15T10:16:09-00:00