Search Search  
Today's Messages (OFF)  | Unanswered Messages (ON)

Forum: Feature this!
 Topic: Joi Konpurekkusu Torii
Joi Konpurekkusu Torii [message #96787] Fri, 22 August 2014 17:37 UTC
avatar JoyComplex is currently online JoyComplex
Messages: 59
Registered: December 2012
Go to my shop
Member
Shapeways Crew
I am very pleased with how my latest sculptural piece came out. It's called the Joi Konpurekkusu Torii (ジョイコンプレックス鳥居) and it's my whimsical interpretation of Torii that pays homage to traditional forms.

The goal behind this little sculpture is to request that those purchasing it use it as a traveling companion. I hope to see my little Torii posing in neat places all around the world!

Check it out HERE

https://images3.sw-cdn.net/model/picture/625x465_2320712_5707615_1408727800.jpg

https://images4.sw-cdn.net/model/picture/625x465_2320712_5708222_1408727800.jpg

http://www.joycomplex.com/wp-content/uploads/2014/08/desktorii_key.jpg


http://www.facebook.com/JoyComplex
 Topic: Check out my New Rings + Pendant!
Check out my New Rings + Pendant! [message #96670] Thu, 21 August 2014 08:38 UTC
avatar alleazzolini  is currently offline alleazzolini
Messages: 1
Registered: June 2012
Go to my shop
Junior Member
Hi everyone, these are my latest creations.
I hope you like them! ;)

----------

Soap-Opera Ring (link)

https://images1.sw-cdn.net/model/picture/625x465_2389272_4162912_1408609167.jpg

"Soap-Opera is a cute, nice, feminine and fun ring, inspired by soap bubbles.
This ring is composed by 38 tangent bubbles of different dimensions that join freely but harmoniously."

----------

Ελλάς Ring (link)

https://images3.sw-cdn.net/model/picture/625x465_2519380_4774573_1408608985.jpg

"Ελλάς is a tribute to Greece and all the Hellenic culture.
The inspiration for this ring was born during a wonderful trip to Athens.
Simple and elegant, light but solid, classic and modern at the same time. "

----------

Futurist Ring Pendant (link)

https://images3.sw-cdn.net/model/picture/625x465_2523285_4766667_1408609165.jpg

"An ode to work, strength, geometric design and mechanics.
It's the result of 11 circular extrusions.
It can be used as a ring, but even better as a pendant. "


Alessandro Azzolini
 Topic: CYCLES
CYCLES [message #96472] Tue, 19 August 2014 09:08 UTC
avatar kiorodesign  is currently offline kiorodesign
Messages: 121
Registered: October 2011
Go to my shop
Senior Member
Hi everybody.
This is our CYCLES, the first try with intricate shapes. Pendant, Keychain, or simply to have on your desk to admire its intricate geometry. There is also a little bit of our aeronautical background...
Hope you like it.

index.php?t=getfile&id=68668&private=0

LINK TO PRODUCT


KIORO'design Team Ciro & Giovanna
 Topic: Reading glasses
Reading glasses [message #96446] Mon, 18 August 2014 23:09 UTC
avatar mrfinius  is currently offline mrfinius
Messages: 1
Registered: December 2012
Go to my shop
Junior Member
index.php?t=getfile&id=68638&private=0

Got them a week ago, they fit me perfectly.
Exquisite geometry, floating lens system and a unique bridge design that assures perfect balancing while wearing them.


The spacing between the two lens holder is exactly 4mm allowing for standard optical screws.
The nose clips are round and flat, allowing you to fit a small piece of cork for additional comfort.

I simply cannot wait to wear them.
Please feel free to "Feature This for Holiday"

[Updated on: Mon, 18 August 2014 23:13 UTC]

 Topic: Rough products
Rough products [message #96392] Mon, 18 August 2014 14:13 UTC
avatar AdrienneBrooks  is currently offline AdrienneBrooks
Messages: 1
Registered: May 2014
Go to my shop
Junior Member
I have just started doing cad design at the beginning of this year, and am so proud to be able to create and have my shapeways product sent to me so that I can see and hold it.
This ring was designed with my husband in mind...he is 6'6" and needed a manly ring. The rough texture on this ring is not enough to hurt or bother his fingers, but enough to give it a natural feel.

index.php?t=getfile&id=68599&private=0
index.php?t=getfile&id=68600&private=0

Thanks
www.shapeways.com/designer/adriennebrooks

  • Attachment: DSCN9241.JPG
    (Size: 1.63MB, Downloaded 35 time(s))

  • Attachment: DSCN9245.JPG
    (Size: 1.54MB, Downloaded 35 time(s))

[Updated on: Mon, 18 August 2014 14:21 UTC] by Moderator


A.Brooks
 Topic: Xiaozhuan Cufflinks bring back history from 2000 yrs ago
Xiaozhuan Cufflinks bring back history from 2000 yrs ago [message #96379] Mon, 18 August 2014 12:49 UTC
avatar PlainOrb  is currently offline PlainOrb
Messages: 130
Registered: January 2012
Go to my shop
Senior Member
Hi This is my , so far, favorite design : Xiaozhuan Cufflinks. Xiaozhuan is a font popular in antique China some 2000 yrs ago when it was Han dynasty. As a super fan of antique east culture, I was so happy to see these cufflinks unboxed. Shop link http://shpws.me/t6ZO

index.php?t=getfile&id=68593&private=0

index.php?t=getfile&id=68594&private=0

index.php?t=getfile&id=68595&private=0

index.php?t=getfile&id=68596&private=0

More info:

This design makes a perfect combination of east classic and west classic. The bridge between the two buttons are inspired from stems of plants, this shows off the beauty of simplicity of the nature. The entire structure is solid, steady and compact. I'm looking for a feature-this for them :P


Plain Orb
 Topic: Facetious is open!
Facetious is open! [message #96333] Sun, 17 August 2014 08:02 UTC
avatar MrSirLRD  is currently offline MrSirLRD
Messages: 1
Registered: May 2014
Go to my shop
Junior Member
Hello all! i'd like to take this opportunity to introduce you to my recently opened shop Facetious!
https://www.shapeways.com/shops/Facetious

Before I show you some of the designs i'll be opening with I thought i'd let you know a little bit about me!
Firstly my name is Luke! i'm from Melbourne, Australia and i am currently studying Electrical and computer systems engineering!
Although 3D design is not part of my current study i have managed (throughout the year) to teach myself! I love to draw and be creative in general (i also love to create electronic gadgets) so 3D design slotted right in with all my other hobbies and is allowing me to add a whole new dimension to my projects (as well as making them look a whole lot more professional!).

I am opening my shop with 8 pendants, they are all mainly designed for females but i am also in the process of creating some for guys (which, lets be honest, is a lot harder)

Here are some of the designs!

Dream Catcher
https://www.shapeways.com/model/2063211/dreamcatcher.html?ma terialId=78
index.php?t=getfile&id=68521&private=0

Pocket Star
https://www.shapeways.com/model/2059733/pocket-star.html?mat erialId=23
index.php?t=getfile&id=68522&private=0

Tortoise and the Hare
https://www.shapeways.com/model/2074847/tortoise-and-the-har e.html?materialId=23
index.php?t=getfile&id=68523&private=0

Maze
https://www.shapeways.com/model/2130622/maze-medallion.html? materialId=38
index.php?t=getfile&id=68524&private=0

Shattered Heart
https://www.shapeways.com/model/2034240/shattered-heart.html ?materialId=39
index.php?t=getfile&id=68526&private=0

As i'm pretty new to 3D design and printing I would love to be featured on shapeways so that my designs can be shown worldwide which would help me to continue designing as well as allowing me to test and sell the dozens of other designs i have in waiting!

Thanks for reading!
-Luke :)

  • Attachment: SH2.jpg
    (Size: 346.18KB, Downloaded 55 time(s))

 Topic: Lucky Heart Pendant for a Necklace or Keychain (Feature This for Holiday)
Lucky Heart Pendant for a Necklace or Keychain (Feature This for Holiday) [message #96111] Wed, 13 August 2014 19:36 UTC
avatar Phits  is currently offline Phits
Messages: 8
Registered: May 2013
Go to my shop
Junior Member
Shapeways Crew
@elisarichardson The lucky heart pendant was inspired from an app I created for iOS called the Crystal Carousel of Magic Fortunes which you can download for free at https://itunes.apple.com/us/app/free-crystal-carousel-magic/ id552608595?mt=8 . I raised the money to be able to build the app through a successful Kickstarter campaign which you can view at https://www.kickstarter.com/projects/phits/crystal-carousel- of-magic-fortunes-universal-app-f . I am hoping to create more 3D Prints from the crystals within the Carousel of Magic Fortunes app. Shapeways did an incredible job printing the Lucky Heart Pendant and I got a great comment and photos from @embrick that I truly appreciate. Thank you for considering the Lucky Heart Pendant for Feature This and Feature This for Holiday!

Sincerely,

John Fitzpatrick
@phits

http://shpws.me/vwY9

index.php?t=getfile&id=68203&private=0

index.php?t=getfile&id=68205&private=0

[Updated on: Mon, 18 August 2014 14:25 UTC]


http://www.fitz.com/
 Topic: Republic Credit
Republic Credit [message #95474] Wed, 06 August 2014 15:25 UTC
avatar sedstiskyfaller  is currently offline sedstiskyfaller
Messages: 15
Registered: March 2014
Go to my shop
Junior Member
Hello all!

My shop contains models inspired by things seen in the Star Wars universe.

I would like to showcase a model I recently had printed and made available in my shop. It is one of my three Republic Credit designs inspired by those used in as currency for the Republic. The one below is printed in Polished Gold Stainless Steel to give it an authentic look and feel:

https://farm4.staticflickr.com/3890/14763772556_0c5e1ce7b3_z.jpg
https://farm4.staticflickr.com/3916/14821657766_ddd67a43a5_z.jpg
https://farm4.staticflickr.com/3919/14657988419_823ca3498f.jpg https://farm6.staticflickr.com/5562/14864502463_57bf37400a.jpg


Here is the product page: https://www.shapeways.com/model/2221453/republic-credit-2.ht ml?li=my-models&materialId=6

Thanks for looking,

Sedsti Skyfaller

[Updated on: Wed, 06 August 2014 15:30 UTC]

 Topic: Lilith Bloodrose the Vampire Girl
Lilith Bloodrose the Vampire Girl [message #95092] Fri, 01 August 2014 10:34 UTC
avatar crusader1245  is currently offline crusader1245
Messages: 5
Registered: July 2014
Go to my shop
Junior Member
I recommend my character to be featured. Up to you if you actually want to.

http://shpws.me/vjFW

index.php?t=getfile&id=66792&private=0
index.php?t=getfile&id=66793&private=0

  • Attachment: P8010051.JPG
    (Size: 2.98MB, Downloaded 37 time(s))

  • Attachment: P8010052.JPG
    (Size: 3.00MB, Downloaded 37 time(s))

 Topic: Cold Fusion metal
Cold Fusion metal [message #94779] Sat, 26 July 2014 07:22 UTC
avatar Oskar_van_Deventer  is currently offline Oskar_van_Deventer
Messages: 389
Registered: December 2008
Go to my shop
Senior Member
Hi Shapeways fans,

Cold Fusion is a six-piece burr, but not a classic one. The pieces are helical and the puzzle is taken apart and put together by pushing the pieces in a helical motion. This version is made of metal.

Watch the YouTube video of the metal version.
Watch the YouTube video of the nylon version.
Buy the puzzle at my Shapeways Shop.
Buy a fully colored and assembled sample (limited edition) from PuzzleMaster.
Read more at the Non-Twisty Puzzles Forum.
Read more at the Puzzle-Place Forum.
Check out the photos below.

Enjoy!

Oskar
index.php?t=getfile&id=66226&private=0
index.php?t=getfile&id=66227&private=0
index.php?t=getfile&id=66228&private=0
index.php?t=getfile&id=66229&private=0
index.php?t=getfile&id=66230&private=0

[Updated on: Sat, 26 July 2014 13:14 UTC]

 Topic: These Rings Have Charm! ;D
These Rings Have Charm! ;D [message #94592] Wed, 23 July 2014 11:20 UTC
avatar PTElephant  is currently offline PTElephant
Messages: 1
Registered: February 2010
Go to my shop
Junior Member
I designed this ring based on one I'd had when I was very young. I inherited it from my mother and it was one of the first pieces of jewelry she was given after she immigrated to the United States from Cuba. Even though it stopped fitting pretty early on, I always kept it with me and wanted to find a way to keep wearing it.
Shapeways gave me an opportunity to design a new version of the ring that I can wear in pretty much any color I want! Being that the ring has interlocking pieces, it can't be printed in metal like the gold one I had as a child, but the plastic is lightweight and makes a nice accessory for pretty much any outfit!

Check out the ring here: http://shpws.me/vhvW

Also, I'm trying to come up with a new name for my shop, as I plan on adding some new products soon. Any suggestions are most welcome! <3 Thanks so much for reading!

https://images3.sw-cdn.net/model/picture/625x465_1761677_3525921_1405416249.jpg

[Updated on: Mon, 28 July 2014 02:48 UTC]

 Topic: this my stuff ive made
this my stuff ive made [message #94293] Fri, 18 July 2014 18:41 UTC
avatar chad121590  is currently offline chad121590
Messages: 16
Registered: July 2014
Go to my shop
Junior Member
ONE IS A WOOD BOLW WITH TEXTURE I JUST NEED HELP RENDERING IT IN MY FILES

  • Attachment: BOWL.dae
    (Size: 359.52KB, Downloaded 11 time(s))


chad brady
 Topic: Chaos Pendant - The Butterfly Effect
Chaos Pendant - The Butterfly Effect [message #94143] Thu, 17 July 2014 15:17 UTC
avatar MiroCreatio  is currently offline MiroCreatio
Messages: 1
Registered: June 2014
Go to my shop
Junior Member
Hallo

I would like to introduce to you my first product in my shop.
The Chaos pendant is a symbol that visualize the dependency of events based on the "Chaos Theory".
It is a study of mathematics and I intended to give it an elegant form which can hold its symbolical power.

I was inspired by the example, that the flapping of the wings of a butterfly in one place may later cause a hurricane in an other.
It can be also a symbol of emotions, events, influences that caused changes in the future. You name it : )

I hope you will like it and it could be featured on Shapeways.
The picture shows the pendant beautifully printed in Polished Brass.

index.php?t=getfile&id=65267&private=0

  • Attachment: 04.jpg
    (Size: 151.68KB, Downloaded 78 time(s))

[Updated on: Fri, 18 July 2014 00:28 UTC]

 Topic: The DIVA has arrived on stage !!!!
The DIVA has arrived on stage !!!! [message #93866] Sun, 13 July 2014 22:31 UTC
avatar Inspired_By_Architecture  is currently offline Inspired_By_Architecture
Messages: 92
Registered: April 2014
Go to my shop
Member
Hi Shapeways Team,

The DIVA has entered the stage!

IBA12 - DIVA. The diva ring can be customized with your favorite snap-on 'attitudes' in the colors of your choice.

The first attitude available is the Urban Rose attitude. New attitudes will be added every now and then which allows you to have multiple-rings-in-one. You can even snap the attitude off again and change it to match your dress of the day. Just buy more attitudes with the ring.

"I was so excited when receiving the package from Shapeways. Due to printing tolerances, metal shrinkage and material differences, it was quite a challenge to make two items that would allow to snap-fit together and yet be able to come apart again. So when I held the two items in my hands and snap-fitted them together for the first time it felt really awesome."

"When creating the design I wanted to make a ring that could actually change its attitude, style and color. Yet, I wanted the ring to express a high quality standard by choosing the material to be Premium Silver and then combining it with a colorful material to add an interesting visual contrast. I have never seen such a ring before and the idea only came to my mind because I belive it fits perfectly with the whole concept behind shops on Shapeways."

The clever eye will see that the ring is a symbol of a woman :-)

I hope you find it interesting and will feature it!

IBA12 DIVA ring:
http://www.shapeways.com/shops/iba

Join the Official Facebook page for Inspired by Architecture (By Michael C Poulsen) to follow updates:
http://www.facebook.com/539749919467483

Thanks,

Michael C. Poulsen / Inspired By Architecture


By Michael C. Poulsen
 Topic: Shift Happens by OSKAR & BRAM
Shift Happens by OSKAR & BRAM [message #93799] Sat, 12 July 2014 09:49 UTC
avatar Oskar_van_Deventer  is currently offline Oskar_van_Deventer
Messages: 389
Registered: December 2008
Go to my shop
Senior Member
Hi Shapeways fans,

Shift Happens is a meshing-gear puzzle in the same vein as Pentafold and Gear Fold. Bram Cohen wanted a set of six gears with an unequal number of teeth. After some discussion, he proposed the numbers 10-20-16-12-18-15. The initial idea was to have the gears in a triangle, but the gear set would not mesh that way. The alternative was a hexagonal pattern. As Pentafold and Gear Fold are rather floppy due to their hinges, Shift Happens uses a shifting mechanism similar to Gear Shift, but flat instead of spatial.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Twisty Puzzles Forum.
Check out the photos below. More photos here.

Enjoy!

Oskar
index.php?t=getfile&id=64811&private=0
index.php?t=getfile&id=64812&private=0
index.php?t=getfile&id=64813&private=0
index.php?t=getfile&id=64814&private=0
index.php?t=getfile&id=64815&private=0

 Topic: Copenhagen Butterfly just landed
Copenhagen Butterfly just landed [message #93782] Fri, 11 July 2014 23:12 UTC
avatar Inspired_By_Architecture  is currently offline Inspired_By_Architecture
Messages: 92
Registered: April 2014
Go to my shop
Member
Hi Shapeways team,

Thanks for featuring my CROSSROADS ring in the latest newsletter. Hope you like my new design the Copenhagen Butterfly which has just landed in my shop. Hope to see it featured :-)

More photos in the shop!

Thanks,

Mike


By Michael C. Poulsen
 Topic: Wearable Optical Illusions in Metal-
Wearable Optical Illusions in Metal- [message #92980] Sun, 29 June 2014 15:25 UTC
avatar kenforst  is currently offline kenforst
Messages: 10
Registered: November 2013
Go to my shop
Junior Member
index.php?t=getfile&id=63535&private=0 It is personally important that my artistic efforts are as original as possible. This item is the result of experimenting with my original 'solid' Hidden Hearts design.

Beginning some years ago and using Sketch Up, I had been working on a much larger use of the same basic Hidden Hearts form as an environmental sculpture (and I still hope to get that funded through Hatchfund.com.)

Anyway, somewhere in those long months of refining the design, researching materials and trying to pretend I was a mechanical engineer on the sculpture concept, I heard about Shapeways.

I thought: "Hmmm... the HH thing might work with this..." It took me many attempts and failures to finally get it to a satisfactory end product. So I was temporarily satisfied. And I sold a few. index.php?t=getfile&id=63540&private=0

But I couldn't leave it alone. So I worked and worked and came up with a ring. index.php?t=getfile&id=63537&private=0

Still not satisfied, I reworked the design and opened up the solid form. Doing that gave it more interest, more possibilities for seeing the heart illusion- plus rectangles, triangles and other things. It also cut back on the weight and cost of the piece. And I'm selling a few. And that's very encouraging. index.php?t=getfile&id=63538&private=0

So for now I can go back to the HH sculpture project- in the open style. index.php?t=getfile&id=63539&private=0 I would encourage others to consider making their successful Shapeways-sized items into super sized ones. It worked for Claes Oldenburg.

 Topic: CROSSROADS by Inspired By Architecture
CROSSROADS by Inspired By Architecture [message #92235] Wed, 18 June 2014 22:09 UTC
avatar Inspired_By_Architecture  is currently offline Inspired_By_Architecture
Messages: 92
Registered: April 2014
Go to my shop
Member
IBA10 - CROSSROADS – Our lives are defined by all the choices we ever made. Each time we made such choice, we have been standing at a crossroad. This ring symbolizes how we got to where we are today. Available in Premium Silver, 14K Gold, Black Matte Steel, Raw Bronze, Gold plated Brass, Polished Brass.

Material shown on photo is Premium Silver.

Inspired By Architecture is a jewellery brand representing architect made conceptual jewellery. The products are characterized by their urban minimalist style and how they communicate stories and symbolism.

  • Attachment: IBA10_PS1.jpg
    (Size: 193.33KB, Downloaded 25 time(s))

  • Attachment: IBA10_PS2.jpg
    (Size: 167.55KB, Downloaded 11 time(s))

  • Attachment: IBA10_PS3.jpg
    (Size: 155.38KB, Downloaded 8 time(s))


By Michael C. Poulsen
 Topic: Catan Card Holders
Catan Card Holders [message #91779] Wed, 11 June 2014 20:23 UTC
avatar IcyCactusDesign  is currently offline IcyCactusDesign
Messages: 1
Registered: July 2012
Go to my shop
Junior Member
They just arrived today and they are phenomenal. A set of playing card holders for the board game Settlers of Catan. I recently got more into playing board games, and Catan has quickly become one of my favorites. One problem I kept having is who ever the dealer ends up being, the game slows down when they have to clean up the mess of cards that end up all over the place. I've seen card holders before, but nothing that fit with my new found love for the game.

So I made my own! For myself and anyone else who struggles with the same problem, I made a few versions for different budgets and needs. One where I took a few days to model all the icons for above each slot, as a visual aid to help distribute the cards more efficiently, another without the icons, as the icons ended up almost doubling the production cost, and finally a bare bones version that would just work enough to hold the decks in place.

Please take a moment to check them out:
index.php?t=getfile&id=61782&private=0
http://shpws.me/ttYV
index.php?t=getfile&id=61781&private=0
http://shpws.me/ttYx
index.php?t=getfile&id=61783&private=0
http://shpws.me/tscT
index.php?t=getfile&id=61784&private=0
http://shpws.me/tsjU

Making these was extremely rewarding, and I plan to continue making things for board games as well as more jewelry and stuff for around the house. I hope to get some good feedback, and I'm completely open to anyones ideas or opinions.

  • Attachment: 1s.jpg
    (Size: 122.59KB, Downloaded 44 time(s))

  • Attachment: 2s.jpg
    (Size: 119.09KB, Downloaded 46 time(s))

  • Attachment: 3s.jpg
    (Size: 111.34KB, Downloaded 44 time(s))

  • Attachment: 4s.jpg
    (Size: 114.25KB, Downloaded 46 time(s))

 Topic: Roman Dodecahedron
Roman Dodecahedron [message #91434] Fri, 06 June 2014 16:05 UTC
avatar JACANT  is currently offline JACANT
Messages: 592
Registered: July 2011
Go to my shop
Senior Member
https://www.youtube.com/watch?v=poGapxsanaI

[Updated on: Tue, 10 June 2014 18:40 UTC]


jacantdesign@gmail.com
 Topic: Gin Time Cucumber Slice Cinema Advert
Gin Time Cucumber Slice Cinema Advert [message #90672] Thu, 29 May 2014 12:41 UTC
avatar Barratomica  is currently offline Barratomica
Messages: 7
Registered: August 2013
Go to my shop
Junior Member
I've added a cinema ready advert to my product description. Summer is coming! Summer is coming!

http://shpws.me/sC4u

https://images1.sw-cdn.net/model/picture/625x465_1856488_2969845_1401367128.jpg

thanks

barratomica




Barratomica
 Topic: 'Rosey The Sprite'
'Rosey The Sprite' [message #90632] Wed, 28 May 2014 21:07 UTC
avatar Roganski  is currently offline Roganski
Messages: 4
Registered: July 2013
Go to my shop
Junior Member
So this is 'Rosey' the main character from a game I worked on. I got the full colour sandstone print done to use for promotional purposes. It's about 16.5cm tall, which is about the same size as Rosey is in the game, so I thought some garden photos of her in among the flowers etc. might make some good marketing material.
I have applied varnish and some acrylic paint to the model in order to get it ready for roughing it in the garden. In the first print her side locks broke off (first picture) so Shapeways kindly did a reprint which came out perfect. She's completely hollow so I've filled this particular model with a quick setting resin which has given her a nice weight now. I've included a couple of shots as well as a touched up promo shot at the end.

She makes a decent garden gnome actually.....................
Anyway, she's available here in case anyone's flowers need protecting. :)

https://www.shapeways.com/model/1769403/16-5cm-rosey-the-spr ite-high-res-model.html?li=my-models&materialId=26

index.php?t=getfile&id=60572&private=0

index.php?t=getfile&id=60573&private=0

index.php?t=getfile&id=60574&private=0

Promo shot after some photo editing.
index.php?t=getfile&id=60575&private=0

  • Attachment: rosey_1.jpg
    (Size: 278.35KB, Downloaded 40 time(s))

  • Attachment: rosey_1b.jpg
    (Size: 250.19KB, Downloaded 40 time(s))

  • Attachment: rosey_2.jpg
    (Size: 929.25KB, Downloaded 40 time(s))

  • Attachment: rosey_3.jpg
    (Size: 445.79KB, Downloaded 40 time(s))

[Updated on: Thu, 29 May 2014 18:55 UTC]


Roganski 3D
 Topic: Universal Wall Dock
Universal Wall Dock [message #90337] Fri, 23 May 2014 16:56 UTC
avatar SilvaAD  is currently offline SilvaAD
Messages: 3
Registered: May 2013
Go to my shop
Junior Member
index.php?t=getfile&id=60266&private=0
This Universal Wall Dock Can be mounted to almost any flat surface by using Command's Wall Adhesives. By having a freestyle adjustment system, the possibilities of what this can dock is only limited by your imagination. Have a case on your phone? This dock can fit most light-medium cases creating a more snug fit. I even use this to dock my iPad Air!

Recommended Command Wall Adhesive Strips: http://amzn.com/B005GITTB2

Universal Wall Dock: http://shpws.me/tdrj

[Updated on: Fri, 23 May 2014 16:57 UTC]


I think therefore I Innovate.
 Topic: Pancake Cube by OSKAR
Pancake Cube by OSKAR [message #89860] Sat, 17 May 2014 08:18 UTC
avatar Oskar_van_Deventer  is currently offline Oskar_van_Deventer
Messages: 389
Registered: December 2008
Go to my shop
Senior Member
Hi Shapeways fans,

Pancake Cube is a twisty 3x3x27 shaped to a cube. It is functionally similar to the WitEden 3x3x9, albeit with many more layers.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Twisty Puzzles Forum.
Check out the photo below.

Enjoy!

Oskar
index.php?t=getfile&id=59749&private=0
index.php?t=getfile&id=59750&private=0
index.php?t=getfile&id=59751&private=0
index.php?t=getfile&id=59752&private=0
index.php?t=getfile&id=59753&private=0

 Topic: Panohood
Panohood [message #89313] Thu, 08 May 2014 11:59 UTC
avatar aleksandar  is currently offline aleksandar
Messages: 31
Registered: October 2010
Go to my shop
Member
This small accessory allows photographers using the Fuji XF 18-55mm lens to take tripod-less panoramas. Panohood's handle turns the camera around the no-parallax point of the lens at 18mm focal length. To use, clip the Panohood to the shortest end of the hood.

http://ad-3d.com/wp-content/uploads/2014/05/panohood-on-fuji-xf-18-55.jpg
http://ad-3d.com/wp-content/uploads/2014/05/panohood-fuji-e-x1.jpg
This is a simple and-yet creative solution for wide-angle indoors photography.
http://ad-3d.com/wp-content/uploads/2014/05/Panohood-used-indoors1.jpg
http://ad-3d.com/wp-content/uploads/2014/05/panohood-fuji-xf18-55-hood1.jpg

Short video presentation http://youtu.be/F09TBJR15t8
Panohood website with detailed explanations http://ad-3d.com/panohood/
Link to the project on shapeways http://shpws.me/szPr
Design & Photography Aleksandar Dimitrov

hope you guys like it :)


product deisgn, visualisation & photography www.ad-3d.com
 Topic: Brand new designs for a brand new shop
Brand new designs for a brand new shop [message #89305] Thu, 08 May 2014 05:31 UTC
avatar Illogical  is currently offline Illogical
Messages: 7
Registered: October 2013
Go to my shop
Junior Member
I've just officially launched my new shop Illogical and, with it, have released five new models (with more soon to follow!). I think you guys will really like them and, just maybe, you'll help me promote my work. Check 'em out:

The first item is my Concentric Hexagons Pendant, shown here in Polished Gold Steel. It's a simple design based on concentric hexagonal forms.
https://images2.sw-cdn.net/model/picture/625x465_1623466_2776651_1399507103.jpg

Next we have the Revolved Reuleaux Triangle, shown in both Royal Blue and Coral Red Strong & Flexible. These small solids are really cool because, despite not being round, they can be rolled between two surfaces just like a sphere. This is thanks to them being the same width in every direction. Pretty cool, huh? Rolling a few of them around between a book and a table always mystifies and intrigues people.
https://images4.sw-cdn.net/model/picture/625x465_1487993_2776796_1399516906.jpg

Shown in Raw Brass, my Helix Pendant is based on the familiar form of DNA, simplified into an elegant pairing of metal ribbons.
https://images1.sw-cdn.net/model/picture/625x465_1611197_2776652_1399507124.jpg

The Icosa-Octahedron, presented in matte black steel, is great as a keychain, a pendant, or just another desk toy. It features a wire representation of an octahedron encompassing an icosahedron, demonstrating their intersecting properties (the points of the icosahedron divide the edges of the octahedron into the golden ratio) while creating a complex and interesting form.
https://images3.sw-cdn.net/model/picture/625x465_1567227_2776675_1399517004.jpg

Finally, I present a Polished Gold Steel version of my Umbilica, a unique form that is similar to the classic Mobius Strip. The object, an umbilic torus, is a solid form whose sole edge loops around 3 times. In addition, a cross section of this object is another cool mathematical shape called a deltoid. Isn't math fun?
https://images1.sw-cdn.net/model/picture/625x465_1565667_2776714_1399516971.jpg

Thanks for checking out my work!

[Updated on: Wed, 14 May 2014 01:05 UTC]

 Topic: The Guardian (Figure)
The Guardian (Figure) [message #89231] Tue, 06 May 2014 19:35 UTC
avatar Alee3d  is currently offline Alee3d
Messages: 1
Registered: April 2014
Go to my shop
Junior Member
Hello everyone! This is my first 3D print and I'd love to get some feedback.

https://www.shapeways.com/model/1861711/the-guardian-3-5inch .html?li=my-models&materialId=62

  • Attachment: IMG_7708.JPG
    (Size: 808.87KB, Downloaded 22 time(s))

  • Attachment: IMG_7759.JPG
    (Size: 846.08KB, Downloaded 7 time(s))

  • Attachment: IMG_7766.JPG
    (Size: 841.01KB, Downloaded 8 time(s))

  • Attachment: IMG_7704.JPG
    (Size: 484.48KB, Downloaded 5 time(s))

  • Attachment: IMG_7700.JPG
    (Size: 442.08KB, Downloaded 7 time(s))

 Topic: Spiral mobius pendant
Spiral mobius pendant [message #89080] Sun, 04 May 2014 15:46 UTC
avatar astosia  is currently offline astosia
Messages: 2
Registered: July 2013
Go to my shop
Junior Member
My new pendant arrived, and I think it looks stunning in polished bronze so I thought I should share it!

I originally designed a larger pendant in steel, which was my first ever print, and is still available on my shop, but it was a bit big for everyday wear to work, so this is quite a bit smaller. For this one, I added a single twist, making it a mobius strip. It was prototyped in Black Detail, and then I took the plunge and printed it in polished bronze. Hope you like it! You can buy it on my shop at http://www.shapeways.com/shops/astosia

index.php?t=getfile&id=58790&private=0
index.php?t=getfile&id=58791&private=0

  • Attachment: main.jpg
    (Size: 491.80KB, Downloaded 38 time(s))

  • Attachment: side.jpg
    (Size: 275.99KB, Downloaded 39 time(s))

 Topic: Xbox One meets UtorCase - mount your smarthphone or small tablet on your controller
Xbox One meets UtorCase - mount your smarthphone or small tablet on your controller [message #89029] Sat, 03 May 2014 04:59 UTC
avatar UtorCase  is currently offline UtorCase
Messages: 11
Registered: October 2013
Go to my shop
Junior Member
Just finished shooting the promo video for the Xbox One UtorCase.
https://www.youtube.com/watch?v=MRDNHSrUas0
Buy at https://www.shapeways.com/shops/utor-case?section=Xbox+One&a mp;a mp;a mp;a mp;a mp;s=0

UtorCase mounts your smartphone or small tablet on your controller, so you can:



UtorCase for the Xbox One controller comes in two flavors, one for the plain controller, and another one for the controller with chat headset attached, since the chat adapter completely changes the controller geometry. The case is tailor printed for over 1400 different smartphones and small tablets for a perfect fit.
index.php?t=getfile&id=58676&private=0
index.php?t=getfile&id=58677&private=0
PS3 and PS4 coming in a few weeks.

[Updated on: Sat, 03 May 2014 05:34 UTC]

 Topic: Get em to the front page!
Get em to the front page! [message #88818] Wed, 30 April 2014 12:51 UTC
avatar Acepalm  is currently offline Acepalm
Messages: 2
Registered: January 2014
Go to my shop
Junior Member
They deserve to.
These are the first 4 prints of 30+ models I have created so far
(http://www.shapeways.com/shops/OneSkullADay)

index.php?t=getfile&id=58343&private=0

index.php?t=getfile&id=58345&private=0

  • Attachment: comp01.jpg
    (Size: 336.07KB, Downloaded 64 time(s))

  • Attachment: comp02.jpg
    (Size: 148.02KB, Downloaded 64 time(s))

 Topic: My Keychain just arrived. Please feature this.
My Keychain just arrived. Please feature this. [message #88811] Wed, 30 April 2014 11:08 UTC
avatar Astraris  is currently offline Astraris
Messages: 3
Registered: April 2014
Go to my shop
Junior Member
Here is my keychain. Whole alphabet can be found at https://www.shapeways.com/shops/marval
Please feature this.
What do you think about it ?
Thanks.
@astraris

index.php?t=getfile&id=58331&private=0

index.php?t=getfile&id=58332&private=0

index.php?t=getfile&id=58333&private=0

index.php?t=getfile&id=58334&private=0

  • Attachment: V_1.png
    (Size: 401.42KB, Downloaded 55 time(s))

  • Attachment: V_2.png
    (Size: 781.68KB, Downloaded 55 time(s))

  • Attachment: V_3.png
    (Size: 736.56KB, Downloaded 54 time(s))

  • Attachment: V_4.png
    (Size: 720.04KB, Downloaded 56 time(s))

[Updated on: Wed, 30 April 2014 11:10 UTC]

 Topic: Ok this is the best week EVER !!
Ok this is the best week EVER !! [message #88750] Tue, 29 April 2014 17:59 UTC
avatar FabMeJewelry  is currently offline FabMeJewelry
Messages: 259
Registered: December 2012
Go to my shop
Senior Member
Shapeways Crew
This article is so fun to read, seriously we love it so much.

FabMe Jewelry is a great example of what happens when girl meets boy and both meet a 3D printer.
http://3dprintingindustry.com/2014/04/30/3d-printing-democra tisation-fabme-jewelry/


Wesley Günter - FabMeJewelry.com - Set a course, for the future !
 Topic: Infinite Mother & Child Pendant (Mother's Day)
Infinite Mother & Child Pendant (Mother's Day) [message #88720] Mon, 28 April 2014 23:54 UTC
avatar Kimotion  is currently offline Kimotion
Messages: 42
Registered: October 2010
Go to my shop
Member
Hello Everyone,

I'd like to share a new pendant I made: Infinite Mother and Child.

I've been wanting to do something with the Infinity symbol for quite some time, but there were so many out there already. I love how deceptively simple it looks, so if I wanted to do anything more to it, it would also need to be simple.

The dots are meant to be the head of the mother and the child (mother embracing her child). I'm not sure how clear it is, but maybe people may like it because it's not clear at first?

https://images2.sw-cdn.net/model/picture/625x465_1763593_2501433_1396817285.jpg
 Topic: I Survived the Big C Pin/Pendant/Fob
I Survived the Big C Pin/Pendant/Fob [message #88686] Mon, 28 April 2014 16:02 UTC
avatar writerxyz  is currently offline writerxyz
Messages: 1
Registered: March 2013
Go to my shop
Junior Member
My designs always begin with a life story.
Not long after a close friend completed his cancer treatments he confided that wearing a bit of ribbon just didn't cut it for him. The year fighting "the big C" had been tough and he thought something to commemorate his journey back to good health should be tougher than a ribbon. The I SURVIVED the Big C pendants are the results of that conversation. They are simple mementos to note the tough fought battles personally won against cancer. Originally, the first was made as a key fob, but they can also be worn as a pendant or, using a tie tack, as a pin.

Find them in my Shapeways shop, Solid Tales Designs

Raw Bronze
index.php?t=getfile&id=58196&private=0

The photo below shows the prints in Polished Brass, Polished Bronze, and Raw Bronze. I love the subtleties of color and texture.
index.php?t=getfile&id=58200&private=0

It looks good in Polished Silver, too.
index.php?t=getfile&id=58198&private=0

Find them in my Shapeways shop, Solid Tales Designs

 Topic: Penta Beams by OSKAR
Penta Beams by OSKAR [message #88562] Sat, 26 April 2014 09:11 UTC
avatar Oskar_van_Deventer  is currently offline Oskar_van_Deventer
Messages: 389
Registered: December 2008
Go to my shop
Senior Member
Hi Shapeways fans,

Penta Beams is a geometric construction puzzle in the shape of a triangular pyramid, made of five pentagonal beams woven through each other. The object is to take the structure apart and put them back together again.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Non-Twisty Puzzles Forum.
Check out the photos below.

Enjoy!

Oskar
index.php?t=getfile&id=58061&private=0
index.php?t=getfile&id=58062&private=0
index.php?t=getfile&id=58063&private=0
index.php?t=getfile&id=58064&private=0

 Topic: Breastfeeding Pendants and Origami Owl Charms
Breastfeeding Pendants and Origami Owl Charms [message #88522] Fri, 25 April 2014 17:28 UTC
avatar TGAW  is currently offline TGAW
Messages: 3
Registered: February 2014
Go to my shop
Junior Member
When a friend of mine started selling Origami Owl Living Lockets, I perused their collection of charms looking for something to represent breastfeeding. As a mother of two boys, breastfeeding was near and dear to my heart. Alas, there was nothing in their product inventory. But thanks to Shapeways and 3D printing (and the myriad of Blender and Shapeways tutorials out there), I was not bound by what charms other companies offer. I was empowered to make exactly what I wanted.

I was able to adapt the Public Domain International Symbol of Breastfeeding into a pendants as well as plates and charms for my Origami Owl locket. I've never been a huge jewelry wearer, but now I wear one of my printed items each and every day. My favorite parts-- when I nurse my infant and he looks up and plays with my pendant. Oh and proudly telling other moms, "Oh that? Yeah, I 3D printed that."

index.php?t=getfile&id=57995&private=0

With the cut off for Mother's Day orders coming up next week for Polished White Strong & Flexible, Polished Alumide, Black Strong & Flexible, and White Strong & Flexible, I thought it might be good timing to feature a cheap gift for the nursing mother. :)

3D Printed Breastfeeding Pendant

3D Printed Breastfeeding Origami Owl Charm

3D Printed Breastfeeding Origami Owl Plate

 Topic: My Wrap Ring in Raw Brass
My Wrap Ring in Raw Brass [message #88432] Thu, 24 April 2014 18:49 UTC
avatar christos_georgoulas  is currently offline christos_georgoulas
Messages: 17
Registered: March 2014
Go to my shop
Junior Member
An elegant and lightweight ring in Raw Brass

You can check this out in my shop http://shpws.me/rDVB

https://images2.sw-cdn.net/model/picture/625x465_1829264_2638004_1398363285.jpg



Thank you Shapeways!

[Updated on: Fri, 25 April 2014 05:28 UTC]

 Topic: My Ring wire mesh just arrived
My Ring wire mesh just arrived [message #88427] Thu, 24 April 2014 17:55 UTC
avatar christos_georgoulas  is currently offline christos_georgoulas
Messages: 17
Registered: March 2014
Go to my shop
Junior Member
My Ring wire mesh just arrived in raw bronze.

I am very pleased with the results, and it is very comfortable and lightweight to wear.

You can check this out in my shop http://shpws.me/ry91

index.php?t=getfile&id=57916&private=0

index.php?t=getfile&id=57917&private=0

index.php?t=getfile&id=57918&private=0

Thank you Shapeways!

  • Attachment: 1.jpg
    (Size: 234.00KB, Downloaded 35 time(s))

  • Attachment: 4.jpg
    (Size: 268.88KB, Downloaded 33 time(s))

  • Attachment: 2.jpg
    (Size: 209.33KB, Downloaded 32 time(s))

[Updated on: Fri, 25 April 2014 05:45 UTC]

 Topic: 1/87 HO scale meter gauge electric trolley/streetcar
1/87 HO scale meter gauge electric trolley/streetcar [message #87941] Wed, 16 April 2014 11:34 UTC
avatar fx  is currently offline fx
Messages: 104
Registered: July 2008
Go to my shop
Senior Member
Just finished to paint and to painfully apply decals on this electric trolley. Thought I would share a picture of it:

index.php?t=getfile&id=57293&private=0

link to the model : https://www.shapeways.com/model/1583255/h0-1-87-tram-strasse nbahn-ce-2-2-trolley.html?li=search-results&materialId=6 1

The printed parts are great, thanks to the Shapeways Team !

[Updated on: Wed, 16 April 2014 11:36 UTC]

Pages (9): [1  2  3  4  5  6  7  8  9    »]

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.