Search Search  
Today's Messages (OFF)  | Unanswered Messages (ON)

Forum: 3D modeler needed
 Topic: **done**
**done** [message #61747] Sun, 10 February 2013 19:48 UTC
avatar Nerdvana_Designs  is currently offline Nerdvana_Designs
Messages: 13
Registered: February 2013
Go to all my models
Junior Member
done

[Updated on: Fri, 16 May 2014 14:50 UTC]

 Topic: Modeler for Tanks & Ships
Modeler for Tanks & Ships [message #61528] Thu, 07 February 2013 15:16 UTC
avatar Coachofmany  is currently offline Coachofmany
Messages: 8
Registered: October 2012
Go to my shop
Junior Member
I need a modeler to make ships in about 1/3000 scale and tanks in 1/285 scale

I need to be able to import it into my Autocad program as a .stp file or a .dwg

We have had the best results with Rhino saving the files as .stp.

Please email me at dougbfriend@yahoo.com and email me a .stp file to amke sure it will work, you can send me a 3d model of a cube or any easy object you wish to make sure that the file can be imported by me.

Please send pricing, time to make models, etc.
I have many models to make and need someone committed on a long term basis.
Thanks


Coachofmany
 Topic: Looking for someone to make a design of this yoyo so i can print it
Looking for someone to make a design of this yoyo so i can print it [message #61438] Wed, 06 February 2013 05:11 UTC
avatar popcorn1079  is currently offline popcorn1079
Messages: 1
Registered: February 2013
Go to all my models
Junior Member
I would like this design made in a 3d printer could someone do it for free? design in link http://shop.yoyoexpert.com/product/715/One-Drop-Cascade Laughing
 Topic: 3D modeler needed to create .stl files of ancient and modern coins.
3D modeler needed to create .stl files of ancient and modern coins. [message #61177] Fri, 01 February 2013 15:15 UTC
avatar Vento  is currently offline Vento
Messages: 5
Registered: October 2012
Go to all my models
Junior Member
Hi,
I'm in search of a 3D modeler (for a reasonable price) as I need to create .stl files from .jpeg images of ancient and modern coins.
If you are interested please send me a private message.

Thanks
 Topic: project
project [message #60884] Sun, 27 January 2013 09:26 UTC
avatar borisgrann  is currently offline borisgrann
Messages: 2
Registered: January 2013
Go to all my models
Junior Member
hello,

Thank you for your interest.
I have found someone to model the item for me.

Thanks again,

Boris.
 Topic: Any
Any [message #60623] Wed, 23 January 2013 22:23 UTC
avatar sanmarco48  is currently offline sanmarco48
Messages: 1
Registered: January 2013
Go to all my models
Junior Member
Any modelers in the Chicago area? I have photos I would like made into 3D sculptures. Please contact me at sanmarco48@aol.com.

Thanks!
 Topic: 3D Modeler wanted using SolidWorks 2013
3D Modeler wanted using SolidWorks 2013 [message #60609] Wed, 23 January 2013 21:08 UTC
avatar DevelopingProductInc.  is currently offline DevelopingProductInc.
Messages: 2
Registered: September 2010
Go to my shop
Junior Member
We are looking to add 3D modelers to our team to generate mechanical models, Assemblies and detail Drawings.
You must do all of the work in SolidWorks 2013 (No Education copies)
Please email us your experience and rates you charge to info@developingproduct.com
 Topic: Xacti CA-100 camera (helmet) mount needed
icon3.gif  Xacti CA-100 camera (helmet) mount needed [message #60256] Tue, 15 January 2013 13:49 UTC
avatar esox_hu  is currently offline esox_hu
Messages: 1
Registered: January 2013
Go to all my models
Junior Member
Hi Designers,

I'd like use my Sanyo Xacti CA100 (also known as Panasonic HX-WA 100 ( http://www.bhphotovideo.com/c/product/764656-REG/Panasonic_H X_WA10D_HX_WA10_HD_Waterproof_Dual.html) as my action camera during skiing and fishing.
he problem is that there is no mounting solution for this camera.
It's designed to hold it in a hand, but it's not too heavy fo mounting it on a head as well...
So I'd like to know if anyone of you interested about desining a small case for this camera, tht can be connected for suction mount or helmet mount or head strip.
 Topic: 3D modeler needed to create necklace and bracelet
3D modeler needed to create necklace and bracelet [message #59975] Thu, 10 January 2013 17:34 UTC
avatar bennina1490  is currently offline bennina1490
Messages: 3
Registered: December 2012
Go to all my models
Junior Member
Hi guys,
I'm looking for someone that can help me to realize a necklace and bracelet. I've already had the two object but I want to reproduce theme on a 3D support.
If you are interested please contact me so I can send you photos of the two object.

Cheers,
Benedetta
 Topic: 3D modeler needed for a sculpture
3D modeler needed for a sculpture [message #59961] Thu, 10 January 2013 08:34 UTC
avatar chenhaowei  is currently offline chenhaowei
Messages: 1
Registered: January 2013
Go to my shop
Junior Member
Hello,

I am preparing a gift for my girlfriend.

So can anyone design a sculpture that put the girl in pic.jpg and the alpaca in P1040062.jpg and the guy in P1040091.jpg into a sculpture of 4-5 inch high? And please give me a quote on that. Thank you very much.


Here is the link to the pictures
https://www.dropbox.com/sh/spd19jmgduxg0z1/jbPaSgPxs1

Please contact me directly at chenhaoweiECE@gmail.com

[Updated on: Thu, 10 January 2013 08:45 UTC]

 Topic: Need to make few adjustments to an existing model
Need to make few adjustments to an existing model [message #59455] Tue, 01 January 2013 23:30 UTC
avatar omarabs  is currently offline omarabs
Messages: 1
Registered: January 2013
Go to my shop
Junior Member
I need to increase the thickness of my spiral turbine model and make it hollow while keeping some support segments inside.
the same model is needed in the largest scale available at shapeways.
Need to add the words "Patent pending" and the patent number in small letters somewhere on the design
Please provide your best quote. I pay through paypal when work is complete.
the model is the only one available for download at my shop to view what I'm talking about.
http://www.shapeways.com/shops/GoldenSpiralTurbine

thank you
 Topic: Modeler need for custom Lego helmets and armor
Modeler need for custom Lego helmets and armor [message #59147] Mon, 24 December 2012 06:21 UTC
avatar RepublicCustoms  is currently offline RepublicCustoms
Messages: 6
Registered: July 2011
Go to my shop
Junior Member
Hello all

I'm currently looking to have some models made
This is not a difficult model to make
I need someone who has designed items to fit Lego figures as to have special parts I'd like to be created

I currently do have 2 other very talented modelers who create other items for me
But I'm looking to have one in particular that does all my figure helmets and armor (armor attachments)

If your interested ill need to see some preexisting models for reference
Models such as this
index.php?t=getfile&id=24725&private=0
Thank you
Dakota k Colley
Republic Customs


Dakota K. Colley
Republic Customs
 Topic: Modeler need for custom Lego helmets and armor
Modeler need for custom Lego helmets and armor [message #59146] Mon, 24 December 2012 06:20 UTC
avatar RepublicCustoms  is currently offline RepublicCustoms
Messages: 6
Registered: July 2011
Go to my shop
Junior Member
Hello all

I'm currently looking to have some models made
This is not a difficult model to make
I need someone who has designed items to fit Lego figures as to have special parts I'd like to be created

I currently do have 2 other very talented modelers who create other items for me
But I'm looking to have one in particular that does all my figure helmets and armor (armor attachments)

If your interested ill need to see some preexisting models for reference
Models such as this
index.php?t=getfile&id=24725&private=0
Thank you
Dakota k Colley
Republic Customs

  • Attachment: image.jpg
    (Size: 123.90KB, Downloaded 144 time(s))


Dakota K. Colley
Republic Customs
 Topic: Any of you located in south florida?
Any of you located in south florida? [message #59073] Sat, 22 December 2012 04:15 UTC
avatar razvanel  is currently offline razvanel
Messages: 9
Registered: October 2012
Go to all my models
Junior Member
Please email me, I would like to hire you to teach me some basic things and make me some things.


email: ronexpressusa@yahoo.com
 Topic: L.A.-Based 3D Modeler Needed to Turn 1/64 Toy Car Molds into Printable Files
L.A.-Based 3D Modeler Needed to Turn 1/64 Toy Car Molds into Printable Files [message #59054] Sat, 22 December 2012 00:49 UTC
avatar redlinefactory  is currently offline redlinefactory
Messages: 1
Registered: December 2012
Go to my shop
Junior Member
Hi,
Just like it says in the description: I have some old toy car molds that need to be digitized into printable files.

Would like to be able to meet the modeler face-to-face each time I hand off a mold (there are 9 molds/13 toy cars in total). Therefore modeler must be Los Angeles-based.

Pricing must be realistic and access to a digitizer would be beautiful.
Thx,
Tim
(626) 716-7780 (until 10:00 P.M. P.S.T., please)
or
redlinefactory@gmail.com

[Updated on: Sat, 22 December 2012 00:56 UTC]

 Topic: 3d modeler for some models
3d modeler for some models [message #59019] Fri, 21 December 2012 12:20 UTC
avatar rupi100  is currently offline rupi100
Messages: 21
Registered: May 2011
Go to my shop
Junior Member
hi

need a 3d modeler how can creat for me 2-3 sci fi models per month

can send you some pictures....


email alex100@gmx.at

 Topic: 1/350 Scale E-1B "Willy Fud"
1/350 Scale E-1B "Willy Fud" [message #58688] Sun, 16 December 2012 13:20 UTC
avatar Beaker01  is currently offline Beaker01
Messages: 1
Registered: November 2012
Go to all my models
Junior Member
I am building a 1/350 sllae model of the USS Bon Homme Richard and I need a few 1/350 scale E-1B "Willy Fuds" for her deck. I actually need 6 of them for a couple of projects. Has anybody tried doing one of these in the 3D Printer World?

Thanks,

Mark
 Topic: Toy Combine 3D Modeler needed
Toy Combine 3D Modeler needed [message #58586] Thu, 13 December 2012 22:16 UTC
avatar timmyholker  is currently offline timmyholker
Messages: 1
Registered: December 2012
Go to all my models
Junior Member
I want to know if there is a 3D Modeler near central Minnesota that could help me make the 3D art on some homemade toy Combines so i can get them made. If you could email me at timmyholker@tds.net that would help a lot.
Thank you, Tim
 Topic: Clean up a simple mesh in Houdini and get it print ready.
icon5.gif  Clean up a simple mesh in Houdini and get it print ready. [message #58409] Tue, 11 December 2012 16:22 UTC
avatar celu  is currently offline celu
Messages: 1
Registered: December 2012
Go to all my models
Junior Member
The model is in a houdini scene file. The model is already done. The model only needs to be cleaned up and optimized for 3d printing according to the shapeway guidelines for printing in sandstone. The scale of the model needs to be in cm. I want the model printed in all black. You need to alert me if anything aspect of the model doesnt fit the 3d printing guidelines. Once cleaned up. You need to convert the model to a file format thats optimal for shapeway printing. The model is very simple,Please See attachment. Please have 'Houdini mesh clean up' as the subject of ur message, so that I know you have read all the requirements. Thx.

[Updated on: Tue, 11 December 2012 16:41 UTC]

 Topic: 3d modeler needed for card game
3d modeler needed for card game [message #58121] Thu, 06 December 2012 19:57 UTC
avatar starcat  is currently offline starcat
Messages: 1
Registered: December 2012
Go to my shop
Junior Member
I am in need for a 3d modeler who can make Models of some heroes for my card game called Legacy so i can give them away as kickstarter pledges.

www.legacytcg.com


unfortunately until the kickstarter happens there isnt any money, so the only way i can do this is to give a cut of the profits to the artist.

for example.


lets say it costs 60 dollars to make the character / print it and ship it to me.

i'd have to give it away at the 200 dollar level or something so the profit is around 140 or so. so each unit sold the artist would get 70 dollars.

either that or we can work out a flat fee and i can pay out of the kickstarter money.


skype = starcat42
 Topic: 3D modeler needed for a pendant
3D modeler needed for a pendant [message #57260] Thu, 22 November 2012 05:40 UTC
avatar jamartur  is currently offline jamartur
Messages: 1
Registered: August 2012
Go to all my models
Junior Member
n/a

[Updated on: Sun, 25 November 2012 18:01 UTC]

 Topic: Need Help: Dungeons and Dragons Special Mini Commission
Need Help: Dungeons and Dragons Special Mini Commission [message #57175] Tue, 20 November 2012 19:39 UTC
avatar Taleweaver  is currently offline Taleweaver
Messages: 1
Registered: November 2012
Go to all my models
Junior Member
Hello,

My name is Josh and I am hoping to commission a very special single plastic miniature moulded and painted in the style/size of Dungeons and Dragons or Pathfinder/Paizo. I have been writing a story that I have also been using as a catalyst setting for a monthly Roleplaying group that my girlfriend has been a part of for years. In this story my girlfriend plays a character that factors into my story and she is just crazy in love with her. So, for Christmas (or her birthday in February) I am hoping to commission a single miniature creation of this character so she can use it in the game or lock it up in a display case, whatever she wants to do. I think this present would make her decade and I am really excited about making it happen..


If you are able and willing or have any information on how I could make this happen please contact me at millershua@gmail.com

Thank you!
 Topic: Small figurine / card holder
Small figurine / card holder [message #56260] Sat, 03 November 2012 14:29 UTC
avatar BradOFarrell  is currently offline BradOFarrell
Messages: 2
Registered: August 2008
Go to all my models
Junior Member
I'm not sure how much this would cost - could you give me a quote?

I want to commission a small figurine that doubles as a playing card holder (only needs to hold a single card) to be used as a kickstarter reward for a card game I'm working on. I'm trying to keep the item + shipping under $20 and as low as possible. I'd be "buying" it at cost and shipping it to each individual kickstarter backer.

It'd be based on this character design:
index.php?t=getfile&id=22347&private=0

It'd look something like this:
http://25.media.tumblr.com/tumblr_mcx1aaaKZ01qznquyo1_400.png

The card would slide in between the front two prongs and back prong on his crown. He would either not have the cape, or the cape would not be flowing but instead draped behind him as an extra 'leg'. He could be on a little circular platter, or not. I'm not sure if colored sandstone-like plastic or a gold-like metal would be the best way to go. Whichever option is the most structurally stable, cheapest, easiest, or looks the best - honestly it's up to the modeler, so long as his silhouette is faithful to the card art above and it stably holds a card without falling over easily, I'll be happy with it.

Is anyone interested in modeling this? How much would I have to pay?

[Updated on: Sat, 03 November 2012 14:30 UTC]

 Topic: Looking for San Diego designers
icon5.gif  Looking for San Diego designers [message #56039] Sat, 27 October 2012 17:07 UTC
avatar sonyasparks  is currently offline sonyasparks
Messages: 1
Registered: October 2012
Go to all my models
Junior Member
I am opening an art gallery in San Diego and I'm interested in seeing work from designers located in San Diego. Please send me a message if you live in the area.
 Topic: Hot Rod for Trophy
Hot Rod for Trophy [message #55813] Tue, 23 October 2012 16:45 UTC
avatar cedge  is currently offline cedge
Messages: 1
Registered: October 2012
Go to all my models
Junior Member
Need a 3D modeler for a small project to create a hot rod trophy figure.

Using an existing design in SketchUp (.SKP) format, you will convert it for 3D printing, scale to 1/32, and make minor modifications to allow for mounting on trophies.

If interested plase RSVP to mchase@cuttingedgebc.com with:

1) Your resume
2) Payment method(s) accepted
3) Hourly or flat rate for job
4) Some examples of your work (3D printable objects only)

Thanks,
MC
 Topic: looking for cad designer
looking for cad designer [message #55643] Fri, 19 October 2012 10:32 UTC
avatar kabonny  is currently offline kabonny
Messages: 1
Registered: July 2012
Go to all my models
Junior Member
im looking for a cad designer familiar with gundam mecha for a project. please pm me.
 Topic: Need a modeler for a 1/48 airplane conversion
Need a modeler for a 1/48 airplane conversion [message #55618] Thu, 18 October 2012 20:14 UTC
avatar madenglishman  is currently offline madenglishman
Messages: 1
Registered: October 2012
Go to all my models
Junior Member
Hi, I want to convert a resin airplane kit to a version that needs a new hollow nose. I thought I might try the printing method but have no experience whatsoever in creating a 3D model. Attached is a pic of the a/c and a comparison showing the scope of the nose job.

If you're interested let me know what you'd need and what it would cost.

Thanks for looking!

James

 Topic: Help for texturing - Ayuda para texturizar
Help for texturing - Ayuda para texturizar [message #55572] Thu, 18 October 2012 14:32 UTC
avatar srpopo  is currently offline srpopo
Messages: 1
Registered: January 2012
Go to all my models
Junior Member
Hello. I'm modeling various figures with sketchup, but I can not bring them with MeshLab texture, can someone tell me another tutorial to better understand the method or explain another way to do
Thank you.

Hola. Estoy modelando diversas figuras con el sketchup, pero no soy capaz de ponerles una textura con el MeshLab, alguien puede indicarme otro tutorial para entender mejor el metodo o explicarme otra forma de hacerlo
Muchas Gracias.

[Updated on: Thu, 18 October 2012 14:34 UTC]

 Topic: Modeller needed for control grips.
Modeller needed for control grips. [message #55398] Mon, 15 October 2012 20:37 UTC
avatar Komodo  is currently offline Komodo
Messages: 1
Registered: July 2012
Go to all my models
Junior Member
Hi,

I'm looking to get a range of control grips designed. I have the techincal drawings for them. They are needed to be hollow with a wall thickness of 3mm and if possible made in 3dsmax. Looking for rough idea of design cost for an time that is aprox 15cm high.

Cheers

Rich
 Topic: CAD guru needed to unique project
CAD guru needed to unique project [message #55240] Fri, 12 October 2012 04:51 UTC
avatar orion2185  is currently offline orion2185
Messages: 21
Registered: February 2012
Go to all my models
Junior Member
Hello

We are looking for a CAD guru/designer

basics of project are a box style packaging

front has visible gears/cogs that are working (can turn, spin, rotate)
making in interactive for the client/end user

when gears turn- they unlock the box
which suddenly -under its own power (automatically) opens up reveling the contents.

many other details to the box- such as engraving and cut outs.

this is for prototype
final product is very small scale - private use only. Thus a small budget for this.

looking to have the complete box fully designed - so we can take to CNC machine to cut out the parts- to be assembled

can supply some very caveman hand drawings- to give basic idea
only to serious parties

please contact me
and give us your bid

thanks
 Topic: Modeler for Transformers Accessory Needed - Leader Optimus Prime
Modeler for Transformers Accessory Needed - Leader Optimus Prime [message #54524] Wed, 26 September 2012 23:50 UTC
avatar optimax  is currently offline optimax
Messages: 1
Registered: December 2011
Go to all my models
Junior Member
Hello, I am in need of collaborating with a modeler on creating a special trailer for my Leader Class Optimus Prime. I have started drawing the concept but need someone experienced in converting the concept to a workable piece. In general the trailer would have some moving pieces but I am trying to design it so that there is not many. Also need to be able to place slots and pegs that would match the Optimus Prime pegs.

thank you
 Topic: Question
Question [message #54412] Sun, 23 September 2012 03:42 UTC
avatar redspider  is currently offline redspider
Messages: 4
Registered: March 2012
Go to all my models
Junior Member
I have always wanted a doll simular to Barbie but not quite that large about 8 inches so so what would it take for me to have a doll done so they could make it? Any information would be very helpful thank you
 Topic: 3D modeler needed for RP
3D modeler needed for RP [message #54240] Wed, 19 September 2012 03:15 UTC
avatar chngyian  is currently offline chngyian
Messages: 1
Registered: September 2012
Go to all my models
Junior Member
As above, please contact me at chngyian@gmail.com

I have the solidworks file for it already so I just need somebody with the machine to print for me, thanks so much! =)

[Updated on: Wed, 19 September 2012 03:17 UTC]

 Topic: quick job (hands forming an 'R') metal necklace.
icon14.gif  quick job (hands forming an 'R') metal necklace. [message #53661] Wed, 05 September 2012 20:51 UTC
avatar soren  is currently offline soren
Messages: 8
Registered: September 2010
Go to all my models
Junior Member
I want to make a metal necklace with 2 hands forming an 'R'.

like this: http://i.imgur.com/snBTM.png

I want it to be the same size, and with loops like this one:

http://www.shapeways.com/model/446744/hand-heart-w-chain-loo ps.html

If anyone have already made 3d hands, and can form them like this easily - please contact me (i can only offer 25$ or so for the design and i only want to use it once).

thanks a bunch!
 Topic: Need custom game pieces
Need custom game pieces [message #53141] Sun, 26 August 2012 04:10 UTC
avatar mindfad  is currently offline mindfad
Messages: 1
Registered: August 2012
Go to all my models
Junior Member
Hello

I am interested in making a various diorama sets based around the AVP movies. There are some sets of miniatures out there but the good ones are long out of print so getting as many as would be needed would be too costly as I have not yet begun getting terrain pieces etc.

So I am interested in possibly getting print templates of Alien and predators parts so I can assemble them and vary the figures stances, weapons etc.

I personally was always disappointed that in the comics and movies the aliens ability to take on characteristics of their hosts did not materialize more. I have a host of ideas Id like to potentially get quotes for.

Also there are a host of 3d files from the games available that if someone could tweak enough to make them suitable for 3d printing and my purposes ( suitable for different poses) is a possibility as well, rather than working from scratch.
 Topic: Cat model
icon4.gif  Cat model [message #52798] Sat, 18 August 2012 01:10 UTC
avatar emmyceru  is currently offline emmyceru
Messages: 1
Registered: November 2011
Go to my shop
Junior Member
I'm looking for someone to do a 3d model of my cat, who has recently passed away. I thought it would be nice to be able to print out a few of them for my family members. I would like to print on shapeways, using the full color sandstone material, so the model would need to be optimized for that. I'm picturing something a few inches tall, probably hollow to save on cost during printing.

I can provide you several photographs of my cat. I'm open to suggestions based upon the artist, whether you do something photo-realistic, or even cartoon-like (maneki neko?)

If this is something you think you can do, you can reply on here, or email me at info@iridetheharlemline.com. I'd love to see some of your previous 3d work, even better if it is on shapeways or in the sandstone material.
 Topic: Modeler needed for 35mm dia pendant
Modeler needed for 35mm dia pendant [message #52759] Fri, 17 August 2012 13:40 UTC
avatar mtnman  is currently offline mtnman
Messages: 1
Registered: August 2012
Go to all my models
Junior Member
I am new to this site and would like to turn a 2D jpg into a 3D pendant (imagine that). Very Happy

Diameter should be around 35mm. The thickness would be about the size of two stacked coins. The Mayan calendar piece thickness would about 1/8" and raised above the lower level sun rays.

Original Design Mock-up
index.php?t=getfile&id=19722&private=0

Black and white versions I've tried using here (I have one model based on the last image below)
http://i243.photobucket.com/albums/ff254/Audixium/Pendant/sol_medallion6.jpg
http://i243.photobucket.com/albums/ff254/Audixium/Pendant/sol_medallion5.jpg
http://i243.photobucket.com/albums/ff254/Audixium/Pendant/sol_medallion2.jpg

Alternative approach (no Mayan 3D print, I would secure a mayan calendar coin to inset into the piece)
http://i243.photobucket.com/albums/ff254/Audixium/Pendant/sol_medallion4.jpg

Material (metals)
Ideally this would be two tone - the sun rays silver, the Mayan calendar gold, and the rim between the two bronze.

Let me know if you would like more info or another image. Thanks!

 Topic: Modeler
Modeler [message #52742] Fri, 17 August 2012 03:27 UTC
avatar big_ham  is currently offline big_ham
Messages: 1
Registered: August 2012
Go to all my models
Junior Member
Need 1st, 2nd and 3rd gen ipad skin with slight augmentations. Cannot fully disclose idea in a public forum. Suffice to say it's simple somewhat ornate modifications to the thin hard skinned snap-on cases.

Ex: http://www.newegg.com/Product/Product.aspx?Item=N82E16858995 281

3D models are floating around of all 3 pieces of hardware, which leads me to believe that someone with experience can perform this in a few hours at most.

I even have a prototype that's nearly perfect that I can show you.

Please let me know what your prices would be as an estimate. I understand they are loose estimates depending how picky I am since you cannot directly see the object in question.

I am not in a severe rush, but completion within the next 2 -4 weeks would be preferable.

Thanks!

Joel
 Topic: Modeler needed for helmet (Completed)
Modeler needed for helmet (Completed) [message #52712] Thu, 16 August 2012 12:59 UTC
avatar protos2011  is currently offline protos2011
Messages: 1
Registered: September 2011
Go to all my models
Junior Member
Job has been Completed. Please remove listing.

[Updated on: Fri, 17 August 2012 12:26 UTC]

 Topic: Sculptor Needed for 28-30mm Miniatures
Sculptor Needed for 28-30mm Miniatures [message #52560] Tue, 14 August 2012 01:26 UTC
avatar justinboyle  is currently offline justinboyle
Messages: 1
Registered: August 2012
Go to all my models
Junior Member
Hello all,

I am interested in producing a pair of 28-30mm miniatures on Shapeways. I'm hoping to find a 3d modeller who can render these and other designs into appropriately sized models.

I have attached my humble concept art. On the left, a Mexican Bandito wearing a drover's coat and carrying a Maxim machine gun. On the right, an armed Rabbi with a pistol and knife. The Rabbi wears payote curls, and has a tallit prayer shawl draped over his shoulders.

If anyone would be willing to render these for me, please send me your quotes.

Thank you,

-Justin

index.php?t=getfile&id=19563&private=0

  • Attachment: tiny.JPG
    (Size: 49.81KB, Downloaded 135 time(s))

Pages (8): [ «    1  2  3  4  5  6  7  8    »]

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.