Search Search  
Today's Messages (OFF)  | Unanswered Messages (ON)

Forum: It arrived!
 Topic: My helix ring
My helix ring [message #108950] Tue, 27 January 2015 00:43 UTC
avatar monk3947  is currently offline monk3947
Messages: 11
Registered: October 2014
Go to my shop
Junior Member
index.php?t=getfile&id=86182&private=0Get the helix ring,I think it is can be a pendant or keychain.index.php?t=getfile&id=86183&private=0index.php?t=getfile&id=86184&private=0

  • Attachment: 8.jpg
    (Size: 1.76MB, Downloaded 79 time(s))

  • Attachment: 7.jpg
    (Size: 1.61MB, Downloaded 81 time(s))

  • Attachment: 3.jpg
    (Size: 1.78MB, Downloaded 78 time(s))

 Topic: Doctor Who 8th Doctor Sonic Screwdriver
Doctor Who 8th Doctor Sonic Screwdriver [message #108854] Sun, 25 January 2015 11:42 UTC
avatar DoctorOctoroc  is currently offline DoctorOctoroc
Messages: 86
Registered: January 2012
Go to my shop
Member
I got my prototype of my 8th Doctor's sonic screwdriver model kit today and had a chance to clean it up and put it together, showing the implementation of an existing electronics core unit to get light and sound using the functional trigger on the outside of the main shaft of the prop.

https://www.youtube.com/watch?v=GTUyBdYfcfk

You can see me struggling to insert the core unit inside - some increase in tolerances are in order there, but I managed to squeeze it in for the demonstration.

The trigger is extremely responsive to activate the push button on the core, which I'm extremely happy with, as this is the most important function of the kit's new design features.

The FUD emitter head doesn't light up as much as I'd like (a result of the core unit and its relative position to the trigger on the actual prop leaving the LED a good distance away from it) so I grabbed a piece of 1/8" acrylic rod I had on hand to place in front of the LED and extend up into the emitter itself. I sanded the end and outside of the rod to diffuse the light and once implemented, you can see an increase in the brightness of the actual emitter. I've since ordered a 3/16" thick rod and redesigned the inside of the top 'fin assembly' to hold it in place. This should go a long way to light the emitter properly.

There is significant light bleed through the white plastic around the location of the emitter in the core but after one coat of black paint, it's significantly diminished and should be gone entirely after a few more coats of paint (except maybe in the dark).

index.php?t=getfile&id=86010&private=0

At the end of the video, you can see me comparing it to (what's left of) the old version of the model which was much smaller, and to the 11th/12th Doctor's sonic screwdriver 3d printed (and painted) prop I designed awhile back. At the very end, you can get a better look at the emitter brightness when I turn the desk lamp off.

I'm really happy with the way the pieces turned out, especially with the responsive functionality of the trigger. It's easier to activate it with the trigger on the model than with the push button itself! Aside from an oversight on my end involving the necessary clearance inside for core, everything fit's nicely. That emitter clicks right into place, you can hear it! It's just a but difficult to remove...

  • Attachment: IMG_5033b.jpg
    (Size: 185.22KB, Downloaded 90 time(s))

[Updated on: Sun, 25 January 2015 11:47 UTC]

 Topic: Mini Gladiator Game Pieces!
Mini Gladiator Game Pieces! [message #108835] Sun, 25 January 2015 02:48 UTC
avatar SmallCaveGames  is currently offline SmallCaveGames
Messages: 12
Registered: November 2014
Go to my shop
Junior Member
I am working on a tabletop game that uses these pieces. I have 11 gladiators and 18 arsenal pieces ready. My favorite part is that we were able to redesign the pedestals so that we can print legible character stats directly on there! Pretty fun.

Credit goes to SpecToys for much of the heavy lifting.

I am looking forward to getting the other 9 because a lot of them had more detailed armor/weapons/etc.

index.php?t=getfile&id=85967&private=0
index.php?t=getfile&id=85968&private=0

  • Attachment: photo 1.JPG
    (Size: 70.63KB, Downloaded 85 time(s))

  • Attachment: photo 2.JPG
    (Size: 96.89KB, Downloaded 82 time(s))

[Updated on: Sun, 25 January 2015 02:48 UTC]


Ophidian Wars: Gladiator Combat on a Galactic Scale! (of 54mm)
 Topic: Roger Retro the Retro Robot
Roger Retro the Retro Robot [message #108834] Sun, 25 January 2015 02:36 UTC
avatar mckevins  is currently offline mckevins
Messages: 5
Registered: December 2013
Go to my shop
Junior Member
It goes without saying that if you model in 3D, at some point you do a robot. This one arrived yestday and it's printed in metallic plastic. Two pics attached.

For added fun, I stood Roger Retro on top of a flashlight to make his suit light up and his one eye glow brightly. Very cool at night !
index.php?t=getfile&id=85965&private=0
index.php?t=getfile&id=85966&private=0javascript:void(0);

[Updated on: Mon, 26 January 2015 18:33 UTC]


mckevin
 Topic: Peek Cube by OSKAR
Peek Cube by OSKAR [message #108789] Sat, 24 January 2015 13:59 UTC
avatar Oskar_van_Deventer  is currently offline Oskar_van_Deventer
Messages: 428
Registered: December 2008
Go to my shop
Senior Member
Hi Shapeways fans,

Peek Cube is a Tribute to Carl Hoff's Window Real 5x5x5. Peek Cube is a spherical 3x3x3 surrounded by a 5x5x5 cube. Peek holes in the outer 5x5x5 enable you to see the state of the inner 3x3x3.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Twisty Puzzles Forum.
Check out the photos below.

Enjoy!

Oskar
index.php?t=getfile&id=85904&private=0
index.php?t=getfile&id=85905&private=0
index.php?t=getfile&id=85906&private=0
index.php?t=getfile&id=85907&private=0
index.php?t=getfile&id=85908&private=0

 Topic: Bow Tie Cufflinks and more!
Bow Tie Cufflinks and more! [message #108731] Fri, 23 January 2015 20:30 UTC
avatar i8kermit  is currently offline i8kermit
Messages: 23
Registered: March 2010
Go to my shop
Junior Member
It's been a while since I've launched a new design, here's my latest cufflinks, printed in Matte Black Steel:

index.php?t=getfile&id=85871&private=0

And I recently did the Dreidel cufflinks for Hannukah:
index.php?t=getfile&id=85872&private=0

These were done based off of a customers signature of his initials:
index.php?t=getfile&id=85873&private=0

And some new Hebrew name Pendants:
index.php?t=getfile&id=85875&private=0
index.php?t=getfile&id=85876&private=0


www.prero.com
 Topic: A Monogram Of The Alphabet
A Monogram Of The Alphabet [message #108419] Tue, 20 January 2015 00:58 UTC
avatar EricHo  is currently offline EricHo
Messages: 197
Registered: November 2013
Go to my shop
Senior Member
I work here
I collaborated with Kostika Spaho to make A Monogram Of The Alphabet. All of the letters and numbers can be found in the diagram. Watch the video here: http://shpws.me/C47V

https://images1.sw-cdn.net/model/picture/625x465_3017766_8362097_1421705252.jpg


https://images4.sw-cdn.net/model/picture/625x465_3017766_8362109_1421705252.jpg


https://images4.sw-cdn.net/model/picture/625x465_3017766_8362133_1421705252.jpg


Social Media Specialist | Shapeways
 Topic: Bram's Cube Plus by OSKAR
Bram's Cube Plus by OSKAR [message #108111] Sat, 17 January 2015 11:41 UTC
avatar Oskar_van_Deventer  is currently offline Oskar_van_Deventer
Messages: 428
Registered: December 2008
Go to my shop
Senior Member
Hi Shapeways fans,

Bram's Cube Plus is a variation of Bram's Cube. Bram suggested that Bram's Cube could be improved as puzzle by having six-teeth gears instead of seven, and by exposing and stickering the slider pieces that connect the gears to the cube.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Twisty Puzzles Forum.
Check out the photos below.

Enjoy!

Oskar
index.php?t=getfile&id=85049&private=0
index.php?t=getfile&id=85050&private=0
index.php?t=getfile&id=85051&private=0
index.php?t=getfile&id=85052&private=0
index.php?t=getfile&id=85053&private=0

[Updated on: Sat, 17 January 2015 11:43 UTC]

 Topic: Matryoshka Ring Set
Matryoshka Ring Set [message #108075] Sat, 17 January 2015 06:19 UTC
avatar clicclac  is currently offline clicclac
Messages: 1
Registered: April 2011
Go to my shop
Junior Member
index.php?t=getfile&id=85033&private=0

  • Attachment: IMG_3825A.jpg
    (Size: 480.33KB, Downloaded 91 time(s))

 Topic: Spirit Lamp
Spirit Lamp [message #108074] Sat, 17 January 2015 06:14 UTC
avatar Zillijia  is currently offline Zillijia
Messages: 17
Registered: August 2014
Go to my shop
Junior Member
Here is a spherical design printed in 20 pieces. index.php?t=getfile&id=85029&private=0 index.php?t=getfile&id=85032&private=0


Inlakesh
 Topic: power of music
power of music [message #108057] Fri, 16 January 2015 21:50 UTC
avatar Design2013  is currently offline Design2013
Messages: 1
Registered: July 2013
Go to my shop
Junior Member

The idea was a possibility to show my loyalty and affection to my favorite band.
I am very happy and thankful to hold this pendant in my hands.
Hope you like

index.php?t=getfile&id=84987&private=0

 Topic: New Stuff
New Stuff [message #108056] Fri, 16 January 2015 21:27 UTC
avatar LukeHarding  is currently offline LukeHarding
Messages: 31
Registered: July 2014
Go to my shop
Member
Firstly sorry for the not so great quality of the photos, I shall take some more soon. Please let me know what you think though!

index.php?t=getfile&id=84976&private=0

Above: just a ring tester. I only managed to get a couple of photos for it before it broke apart. I need to make it a little tougher.

index.php?t=getfile&id=84978&private=0

My first set of men's cufflinks, printed in plastic so I can make sure the sizing is correct. Possibly the favourite out of the shapes I've been experimenting with.

index.php?t=getfile&id=84979&private=0

Another set of cufflinks that I will be printing in metal soon, hopefully the surfacing will look even better.

index.php?t=getfile&id=84980&private=0

The cracked pendant. The original idea was to have a pendant that looked like a smooth gem that had been cracked all the way around. I might have to make the cracks a little bit deeper for a metal version.

index.php?t=getfile&id=84985&private=0

Another pendant. Sorry for the really terrible photo. This is supposed to be a more modern take, with sharp edges and flat faces. I might make it into a keyring also.

  • Attachment: IMG_6753.JPG
    (Size: 4.68MB, Downloaded 90 time(s))

  • Attachment: IMG_6806.JPG
    (Size: 3.55MB, Downloaded 73 time(s))

  • Attachment: IMG_6827.JPG
    (Size: 4.02MB, Downloaded 89 time(s))

  • Attachment: IMG_6820.JPG
    (Size: 3.58MB, Downloaded 71 time(s))

  • Attachment: IMG_6781.JPG
    (Size: 4.20MB, Downloaded 88 time(s))

 Topic: Leonardo
Leonardo [message #108033] Fri, 16 January 2015 16:47 UTC
avatar packingprotons  is currently offline packingprotons
Messages: 19
Registered: December 2014
Go to my shop
Junior Member
so, this is my SECOND 3D printed figure.

someone recommended a UK company first, that is where Krang in the lower right came from. he was 5 inches at $220's but the quality wasn't really there.

Then I got recommend shapeways. Leonardo stands at 10 inches (even though I submitted an 8 inch model, not complaining!) and cost $440's. he's all solid, so it is more of a statue quality to him
https://scontent-b-iad.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/10906194_10152946769840211_2075235405379444942_n.jpg?oh=e7bdb1491cf3e2d9e4da9c555d414d73&oe=55232558
This is my first try at painting the figure. The Eyes are marker-ed on.
https://scontent-b-iad.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/1508974_10152957291330211_6358962229622822065_n.jpg?oh=0781f01b427d9cee3e0f9ee3649cbfa9&oe=552D83A2
i have recently made changes to Leonardo so he has double the polygon count. The figure should turn out smoother than this prototype. And hopefully the mask will survive the printing process now. He is available for sale here in both ten inch and five inch versions. he should also be able to stand under his own power with newly flattened feet. Roof top base will be optional once I figure out how to drive price down.
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xaf1/v/t1.0-9/10700_10152957082545211_5040448658986955949_n.jpg?oh=3084670c24697c520014390b2bf694dd&oe=556B78DB&__gda__=1429746085_f9a5e955b160d8b798226908b9678929

https://www.shapeways.com/model/3028734/ninnja-turtle-leonar do-1987.html?li=aeTabs
https://www.shapeways.com/model/3029414/ninja-turtle-leonard o-1987-5-inch-version.html?li=aeTabs

thanks for any support... and if anyone orders the new version, I'd love to see photos! I put in an order for the smaller version just to see what size it comes in... If these prove popular, I will do the other turtles next. Leonardos pose is taken DIRECTLY from a 1987 series episode still so he's jumped right off the screen onto your desk..

https://scontent-b-ord.xx.fbcdn.net/hphotos-xpf1/t31.0-8/10854248_10152957696855211_5612705327077631062_o.jpg

[Updated on: Fri, 16 January 2015 17:15 UTC]

 Topic: Paintball Barrel GoPro Mount
Paintball Barrel GoPro Mount [message #107798] Wed, 14 January 2015 01:44 UTC
avatar andrew_speth  is currently offline andrew_speth
Messages: 7
Registered: October 2013
Go to my shop
Junior Member
index.php?t=getfile&id=84553&private=0I have received nearly every color of the plastics now for my GoPro mounts and the colors are great! I also wanted to thank Shapeways for their awesome customer service, some of the mounts arrived distorted (which turned out to be a printer error) and Shapeways quickly replaced them!


Best Regards, Andrew
 Topic: 26.2 Feather Necklace
26.2 Feather Necklace [message #107769] Tue, 13 January 2015 10:04 UTC
avatar vmxo  is currently offline vmxo
Messages: 1
Registered: December 2014
Go to my shop
Junior Member
Pretty stoked about getting something back from #Shapeways.
This is the first piece I've printed in metal. It looks great, just as I imagined. Thanks!
Unboxing video.. https://www.youtube.com/watch?v=y6PLCbbBPyQ

index.php?t=getfile&id=84433&private=0

  • Attachment: 26-2.jpg
    (Size: 43.83KB, Downloaded 100 time(s))

 Topic: Andreas Crossing by OSKAR
Andreas Crossing by OSKAR [message #107608] Sat, 10 January 2015 09:57 UTC
avatar Oskar_van_Deventer  is currently offline Oskar_van_Deventer
Messages: 428
Registered: December 2008
Go to my shop
Senior Member
Hi Shapeways fans,

Andreas Crossing was requested by Andreas Nortmann. Andreas noted that there are many 2D puzzles with intersecting plungers like this one. So he wondered whether something similar could exist in three dimensions, using cubes instead of squares.

The puzzle has twenty cubies with hooks locked inside a frame. The hooks keep the cubies together. The hooking mechanism bears some similarities with that of Combo Cube.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Twisty Puzzles Forum.
Check out the photos below.

Enjoy!

Oskar
index.php?t=getfile&id=84052&private=0
index.php?t=getfile&id=84053&private=0
index.php?t=getfile&id=84054&private=0
index.php?t=getfile&id=84055&private=0
index.php?t=getfile&id=84056&private=0

 Topic: Dragon head necklace/pendant in WSF
Dragon head necklace/pendant in WSF [message #107364] Tue, 06 January 2015 17:12 UTC
avatar gerbilmodels  is currently offline gerbilmodels
Messages: 1
Registered: December 2014
Go to my shop
Junior Member
My first print of a simple dragons head in WSF.

Im pretty happy at the results. This was done as a test to see if i had done things correctly.

index.php?t=getfile&id=83677&private=0

  • Attachment: P1000491.JPG
    (Size: 620.73KB, Downloaded 100 time(s))

 Topic: Blobfish worlds ugliest creature
Blobfish worlds ugliest creature [message #106898] Sat, 03 January 2015 14:44 UTC
avatar EricHo  is currently offline EricHo
Messages: 197
Registered: November 2013
Go to my shop
Senior Member
I work here
My 3D printed Blobfish designed in collaboration with Kostika Spaho: http://shpws.me/APOk

https://images3.sw-cdn.net/model/picture/625x465_2978778_8131350_1420249564.jpg

https://images1.sw-cdn.net/model/picture/625x465_2978778_8131321_1420249564.jpg

https://images3.sw-cdn.net/model/picture/625x465_2978778_8133669_1420249565.jpg


Social Media Specialist | Shapeways
 Topic: The CW Reverse Flash Ring in Sterling Silver
The CW Reverse Flash Ring in Sterling Silver [message #106753] Sat, 03 January 2015 02:08 UTC
avatar replicaprops  is currently offline replicaprops
Messages: 22
Registered: March 2011
Go to my shop
Junior Member
This was provided by my customer. This is F-ing Awesome
https://scontent-b-dfw.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/10906413_949652868391241_1989294394090263710_n.jpg?oh=42efb2f385479755facee1c3483d7cd0&oe=55399B34

[Updated on: Sat, 03 January 2015 02:08 UTC]

 Topic: The Flickster, a Hybrid Vehicle
The Flickster, a Hybrid Vehicle [message #106752] Sat, 03 January 2015 01:38 UTC
avatar mckevins  is currently offline mckevins
Messages: 5
Registered: December 2013
Go to my shop
Junior Member
index.php?t=getfile&id=83330&private=0


I guess the best way to describe the Flickster is to imagine a cross between a jet fighter and a surfboard. An unusual pairing, to be sure, but I'm very happy with how this printed considering the tight tolerance with the axles and wheels. Just a tap sends it rolling!

See it in action:
http://youtu.be/IQN26yBEN8I

McKevin Shaughnessy
Litemotifs Designindex.php?t=getfile&id=83331&private=0

[Updated on: Fri, 13 February 2015 04:32 UTC]


mckevin
 Topic: Eyeglass frames, wallet, and thickness templates!
Eyeglass frames, wallet, and thickness templates! [message #106751] Sat, 03 January 2015 01:05 UTC
avatar 4xNote  is currently offline 4xNote
Messages: 2
Registered: July 2014
Go to my shop
Junior Member
Hey everyone! I'm fairly new around here, but I've been on Shapeways since July developing several products. After months of prototyping, my first batch of designs are ready to sell to other people! They arrived on Christmas eve; I almost FLEW home when I got the text that my package was delivered to my doorstep.

There's a lot of information about my designs, so I made videos explaining how it works. My voice sounds dorky, but I figured it would at least be better than having a massive wall of text on the description.

Let me know what you think, or if there's anything that looks out of place!

https://images3.sw-cdn.net/model/picture/625x465_2709305_8131985_1420238127.jpg

https://images1.sw-cdn.net/model/picture/625x465_2715293_8131758_1420238660.jpg

https://images2.sw-cdn.net/model/picture/625x465_2396828_8132416_1420244287.jpg

https://www.shapeways.com/shops/oooo
 Topic: Blowfishpig, Rabbitrobot Mk V, and improved Lobsterbunny arrived!
Blowfishpig, Rabbitrobot Mk V, and improved Lobsterbunny arrived! [message #106750] Sat, 03 January 2015 00:48 UTC
avatar Sabaku_Ika  is currently offline Sabaku_Ika
Messages: 25
Registered: April 2014
Go to my shop
Junior Member
http://i.imgur.com/uR8OBj6.jpg?1

http://i.imgur.com/NJOAFrW.jpg?1

http://i.imgur.com/1nBRQp9.jpg?1

Things You Want to Buy
 Topic: Judgement class - capital ship (painted and weathered)
Judgement class - capital ship (painted and weathered) [message #106422] Tue, 30 December 2014 08:27 UTC
avatar ProjectMobius  is currently offline ProjectMobius
Messages: 131
Registered: August 2014
Go to my shop
Senior Member
Finally finished painting and weathering the capital ship. Hope you guys like it!

index.php?t=getfile&id=82887&private=0

url: https://www.shapeways.com/model/2761171/judgement-class-capi tal-ship.html


Porfolio: http://www.project-mobius.com
 Topic: Cartoon Hand
Cartoon Hand [message #106351] Tue, 30 December 2014 00:39 UTC
avatar TommySaysSoWhat  is currently offline TommySaysSoWhat
Messages: 71
Registered: November 2009
Go to my shop
Member
Made some small cupped cartoon hands by extruding this hand from The Noun Project, then subtracting a sphere from it.

I don't have any real plans for them. I just thought they were neat.

index.php?t=getfile&id=82862&private=0

index.php?t=getfile&id=82863&private=0

 Topic: The Beatles, Pixelated.
The Beatles, Pixelated. [message #106349] Mon, 29 December 2014 22:54 UTC
avatar TommySaysSoWhat  is currently offline TommySaysSoWhat
Messages: 71
Registered: November 2009
Go to my shop
Member
Found a neat pixelated version of the Beatles online somewhere and converted it into full-color sandstone.

I'm always amazed at the amount of personality someone can achieve with a handful of pixels.
index.php?t=getfile&id=82828&private=0

I'm also impressed at the structural integrity of full-color sandstone. I wasn't expecting this to print so well this thin, with those wee little arms.
index.php?t=getfile&id=82829&private=0

 Topic: Silver Sea Lion Bracelet
Silver Sea Lion Bracelet [message #106272] Sun, 28 December 2014 19:57 UTC
avatar lensman  is currently offline lensman
Messages: 1696
Registered: December 2009
Go to my shop
Shapie Expert
I had someone commission this as a gift for a seal lion trainer. Then, some time later, another trainer contacted me to make one. This is the slightly revised version.

In my shop here: http://shpws.me/z6cl

index.php?t=getfile&id=82688&private=0


Glenn ------ My Website Third Dimension Jewellery
 Topic: Scrambleable Cube by OSKAR
Scrambleable Cube by OSKAR [message #106209] Sat, 27 December 2014 15:43 UTC
avatar Oskar_van_Deventer  is currently offline Oskar_van_Deventer
Messages: 428
Registered: December 2008
Go to my shop
Senior Member
Hi Shapeways fans,

Scrambleable Cube is an idea by Bram Cohen, after seeing my Full Turn Cube. The puzzle is a "sequential discover" twisty puzzle. That is, when you play with it, you gradually learn its operation.
-Discovery 1: Meh, that just looks like a Rubik's Cube.
-Discovery 2: Hey, I can turn each of the faces, yeah, this must be just a Rubik's Cube.
-Discovery 3: Oh, after any first turn, I cannot turn any of the other faces. This must one of those joke Rubik's Cubes by Oskar.
-Discovery 4: Yeah, the puzzle can be actually be scrambled, see me do it.
-Discovery 5: Oops, now I have to solve it.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Twisty Puzzles Forum.
Check out the photos below.

Enjoy!

Oskar
index.php?t=getfile&id=82626&private=0
index.php?t=getfile&id=82627&private=0
index.php?t=getfile&id=82628&private=0
index.php?t=getfile&id=82629&private=0
index.php?t=getfile&id=82630&private=0

[Updated on: Sat, 27 December 2014 15:44 UTC]

 Topic: NEW pendants
NEW pendants [message #106120] Thu, 25 December 2014 18:59 UTC
avatar melkon  is currently offline melkon
Messages: 11
Registered: January 2013
Go to my shop
Junior Member
index.php?t=getfile&id=82529&private=0

  • Attachment: 2512.jpg
    (Size: 253.89KB, Downloaded 17 time(s))

  • Attachment: 25121.jpg
    (Size: 208.21KB, Downloaded 16 time(s))

  • Attachment: 25122.jpg
    (Size: 258.95KB, Downloaded 17 time(s))

  • Attachment: 25123.jpg
    (Size: 204.43KB, Downloaded 15 time(s))

  • Attachment: DSC03506.JPG
    (Size: 1.65MB, Downloaded 110 time(s))

 Topic: Oh deer!
Oh deer! [message #106002] Wed, 24 December 2014 03:35 UTC
avatar mitchmcquinn  is currently offline mitchmcquinn
Messages: 10
Registered: April 2014
Go to my shop
Junior Member
I'm so excited to finally hold my first model!
This is a really special piece for me, as it's going to be a Christmas present for my grandfather, and it will totally blow his mind.
My grampy has apple trees in his back yard, and every morning he wakes up to find a small group of deer eating breakfast. Anyway, a few years ago he started getting surprise visits from a particularly special albino fawn, much to my grampy's delight. Unfortunately he met an early demise when he was shot by some douchebag hunter, and it was a day my grampy will never forget. I made this piece to commemorate the loss of that little white angel, and also because my grampy is color blind, and has never been able to see any of the art I've created in the same way as everyone else, so I wanted to make something without color he can appreciate. After many hours studying deer anatomy, I came up with this.
index.php?t=getfile&id=82425&private=0
index.php?t=getfile&id=82426&private=0
index.php?t=getfile&id=82427&private=0
index.php?t=getfile&id=82428&private=0
index.php?t=getfile&id=82429&private=0

  • Attachment: IMG_4916.JPG
    (Size: 5.40MB, Downloaded 143 time(s))

  • Attachment: IMG_4917.JPG
    (Size: 5.41MB, Downloaded 137 time(s))

  • Attachment: IMG_4921.JPG
    (Size: 5.49MB, Downloaded 139 time(s))

  • Attachment: IMG_4922.JPG
    (Size: 5.57MB, Downloaded 140 time(s))

  • Attachment: IMG_4923.JPG
    (Size: 5.68MB, Downloaded 138 time(s))

 Topic: Coral iPhone 5 case
Coral iPhone 5 case [message #105971] Tue, 23 December 2014 18:57 UTC
avatar informance  is currently offline informance
Messages: 5
Registered: August 2008
Go to my shop
Junior Member
Very excite to have this come form Shapeways. It needs some modifications but it really rocks. It is a totally different experience having such a firm grip when holding your phone. The design is using an iso-surface over a 3D cloud of points.

index.php?t=getfile&id=82374&private=0

index.php?t=getfile&id=82375&private=0

Will go into the next round of prototyping and also have a iPhone 6 version coming.

Enjoy

  • Attachment: IMG_0423.jpg
    (Size: 190.13KB, Downloaded 87 time(s))

  • Attachment: IMG_0422.jpg
    (Size: 155.12KB, Downloaded 91 time(s))

 Topic: Wave Ball Pendant 25mm
Wave Ball Pendant 25mm [message #105798] Sun, 21 December 2014 23:50 UTC
avatar TinLynx  is currently offline TinLynx
Messages: 17
Registered: November 2014
Go to my shop
Junior Member
Wave Ball Pendant 25mm - Polished brass. From a different angle it looks completely different. It's surprisingly very rigid for a shape that doesn't have supporting connections between the inside and outside like the storm ball.
http://shpws.me/z9Zx

index.php?t=getfile&id=82178&private=0
index.php?t=getfile&id=82179&private=0

 Topic: Bow tie lens cap holder
Bow tie lens cap holder [message #105636] Sat, 20 December 2014 00:25 UTC
avatar bradykineticcuriosities  is currently offline bradykineticcuriosities
Messages: 83
Registered: February 2012
Go to my shop
Member
http://cdn.makeagif.com/media/12-19-2014/mEYsCV.gif

Here's a little bit of fancy and function for your camera!

index.php?t=getfile&id=81997&private=0

Available here: http://shpws.me/Az5S

[Updated on: Sat, 20 December 2014 03:59 UTC]


www.bradykineticcuriosities.com A good head and a good heart are always a formidable combination.
 Topic: Avocaowl arrived!
Avocaowl arrived! [message #105624] Fri, 19 December 2014 22:25 UTC
avatar Sabaku_Ika  is currently offline Sabaku_Ika
Messages: 25
Registered: April 2014
Go to my shop
Junior Member
https://images3.sw-cdn.net/model/picture/625x465_1954800_8005669_1419019407.jpg

https://images3.sw-cdn.net/model/picture/625x465_1954800_8005670_1419019408.jpg

I've neglected to post here about all my previous object arrivals. Now, I'm going to do that.
 Topic: Movable invertible moiré object
Movable invertible moiré object [message #105553] Thu, 18 December 2014 19:59 UTC
avatar aryser  is currently offline aryser
Messages: 23
Registered: November 2012
Go to my shop
Junior Member
I received today a nice and bigger version of my invertible object with moiré effect.
With the new price model it is easier to make objects stronger without impact on price.
Link: http://shpws.me/z5oy
Video (with the same object but smaller) http://youtu.be/u1-yqtdY2lg
index.php?t=getfile&id=81820&private=0
please take a lock and tell what you think!

aryser

  • Attachment: IMG_3076k.jpg
    (Size: 40.69KB, Downloaded 95 time(s))

 Topic: Celtic Knot Snowflake Pendant - Premium Silver
Celtic Knot Snowflake Pendant - Premium Silver [message #105498] Wed, 17 December 2014 18:34 UTC
avatar dfoley75  is currently offline dfoley75
Messages: 26
Registered: August 2012
Go to my shop
Junior Member
This was the first time I got something in premium silver. I'd only tried the polished silver before this.

https://images2.sw-cdn.net/model/picture/625x465_1309250_7969772_1418775226.jpg

The product page is here: http://shpws.me/pKcv
 Topic: Flowers, balls of yarn and a plate
Flowers, balls of yarn and a plate [message #105434] Tue, 16 December 2014 17:28 UTC
avatar WILTD  is currently offline WILTD
Messages: 6
Registered: December 2011
Go to my shop
Junior Member
Hi,

the arrival of the new models lighted up the grey and rainy day. And now it's perfect.
One of the models is already in my new shop WILTD and the other will follow.

I've got some Flowers:
index.php?t=getfile&id=81497&private=0
I think I'm going to pick them up and make some Pendants out of them!

Do you know the problem of finding the loose end of a ball of yarn? This was the inspiration for this balls:
index.php?t=getfile&id=81498&private=0

And the glass perfectly fits into the groove of the wired frame.
index.php?t=getfile&id=81499&private=0

So, all in all, it made my day.

What do you think?

Best
Andrea

  • Attachment: Flowers.jpg
    (Size: 38.88KB, Downloaded 106 time(s))

  • Attachment: Balls.jpg
    (Size: 40.35KB, Downloaded 107 time(s))

  • Attachment: Candy Plate.jpg
    (Size: 42.38KB, Downloaded 104 time(s))


WILTD
 Topic: A Little wolf
A Little wolf [message #105417] Tue, 16 December 2014 14:24 UTC
avatar rainfer  is currently offline rainfer
Messages: 4
Registered: December 2014
Go to my shop
Junior Member
It looks a bit cute instead of fearful ! lol

index.php?t=getfile&id=81482&private=0

index.php?t=getfile&id=81483&private=0

  • Attachment: p3.png
    (Size: 304.29KB, Downloaded 112 time(s))

  • Attachment: p1.png
    (Size: 357.29KB, Downloaded 110 time(s))

 Topic: Oskar's Cubes Metallic by OSKAR
Oskar's Cubes Metallic by OSKAR [message #104965] Sat, 13 December 2014 11:20 UTC
avatar Oskar_van_Deventer  is currently offline Oskar_van_Deventer
Messages: 428
Registered: December 2008
Go to my shop
Senior Member
Hi Shapeways fans,

Oskar's Cubes was mass-produced in metal by Bits and Pieces. Now it is sold out. Fans keep asking for this puzzle, and vintage samples are hard to find. Therefore I made this 3D-printed metallic plastic version of the puzzle. As Tony Fisher's had already demonstrated with his 3D-printed Astrolabacus version, 3D-printing is not just for stand-alone productions or preludes to mass-production, but also for resurrection of forever-sold-out mass products.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Non-Twisty Puzzles Forum
Check out the photos below.

Enjoy!

Oskar
index.php?t=getfile&id=81157&private=0
index.php?t=getfile&id=81158&private=0
index.php?t=getfile&id=81159&private=0
index.php?t=getfile&id=81160&private=0
index.php?t=getfile&id=81161&private=0

 Topic: Some cyclids in colors
Some cyclids in colors [message #104568] Tue, 09 December 2014 14:46 UTC
avatar fdecomite  is currently offline fdecomite
Messages: 55
Registered: December 2009
Go to my shop
Member
Three models of Dupin Cyclides, two in experimental full color plastic, the last one in full color sandstone.
Plastic is not very rigid, I should have made the model a little bit bigger...


index.php?t=getfile&id=80665&private=0index.php?t=getfile&id=80664&private=0index.php?t=getfile&id=80663&private=0

  • Attachment: DSCF2644b.JPG
    (Size: 533.97KB, Downloaded 89 time(s))

  • Attachment: DSCF2651b.JPG
    (Size: 423.09KB, Downloaded 87 time(s))

  • Attachment: DSCF2659b.JPG
    (Size: 407.46KB, Downloaded 88 time(s))

 Topic: Christmas Decoration
Christmas Decoration [message #104490] Sun, 07 December 2014 18:28 UTC
avatar jaylen  is currently offline jaylen
Messages: 6
Registered: August 2011
Go to my shop
Junior Member
My Christmas Decoration arrived this week :-)
Although one part was broken, I really liked the outcome of the design. And as always, I am impressed by 3D printing.

Here are some photos of the decoration. So, what do you think? Any suggestions or possible improvements?

Some small stars with a bigger one in the background:
https://images3.sw-cdn.net/model/picture/625x465_2879223_7851557_1417975718.jpg
Available in my shapeways shop at http://shpws.me/zefg

The bigger star more closely:
https://images1.sw-cdn.net/model/picture/625x465_2881915_7851509_1417975445.jpg
Available in my shapeways shop at http://shpws.me/zefY

Some stars for decorating thin objects like a mirror. These can simply be clipped on.
https://images2.sw-cdn.net/model/picture/625x465_2879180_7851597_1417975982.jpg
Available in my shapeways shop at http://shpws.me/zeg0
One ordered mirror decoration was broken. But shapeways' support was really great by offering a reprint. To improve the structure of the model, I might do a minor update soon.

Update 8th December: Updated the mirror decoration model to slightly increase thickness of the clamps to hold to the mirror. This should not affect printability.

[Updated on: Mon, 08 December 2014 08:30 UTC]

Pages (27): [ «    1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16    »]

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.