Hey there.
Just got my first 3d print through the door today.
Really exiting stuff !



I work in the animation industry for a living, so it's awesome to use some of your skills in other ways like this.

Cheers

Kristoffer Nissen

• Attachment: puggy.jpg
  (Size: 400.49KB, Downloaded 37 time(s))

This is our collection "SPIGA", ring and pendant. A simple and light design , reminiscent of summer and the lightness of the beautiful moments.

Questo è la nostra collezione "SPIGA", anello e pendolo. Un design semplice e leggero, che ricorda l'estate e la leggerezza dei momenti più belli.







link to products
"SPIGA" pendant
"SPIGA" ring

• Attachment: spiga_pendant_4_logo.jpg
  (Size: 89.32KB, Downloaded 51 time(s))

• Attachment: spiga_pendant_3_logo.jpg
  (Size: 569.33KB, Downloaded 49 time(s))

• Attachment: spiga_ring_1_logo.jpg
  (Size: 340.38KB, Downloaded 48 time(s))

• Attachment: spiga_pendant_1_logo.jpg
  (Size: 565.35KB, Downloaded 47 time(s))

• Attachment: spiga_pendant_2_logo.jpg
  (Size: 93.14KB, Downloaded 46 time(s))

• Attachment: anello_medici.jpg
  (Size: 1.11MB, Downloaded 54 time(s))

keymichael1855 was kind enough to do a 1/96 scale Apollo CM (command module), AND IT LOOKS GREAT.
Thank you very much.

• Attachment: shapeways03.jpg
  (Size: 74.42KB, Downloaded 105 time(s))

I designed a steampunk-styled fish using Blender and the 3D sandstone print just arrived from Shapeways. Somehow, I messed up the colors so some of the parts came out white. But I'm very impressed with the detail of the 3D print, especially the propellor.

• Attachment: steampunkfish.jpg
  (Size: 82.46KB, Downloaded 119 time(s))

Hi Shapeways fans,

Danger Cube is a more dangerous version of Caution Cube, with more and sharper gears. The outer gears are similar to Timur Evbatyrov's Gear Corner Turning Octahedron. The inner mechanism was cloned from Geared Mixup. This means that all center gears and edge gears can be interchanged.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Twisty Puzzles Forum.
Check out the photos below.

Enjoy!

Oskar

• Attachment: Danger Cube - view 1.jpg
  (Size: 51.21KB, Downloaded 85 time(s))

• Attachment: Danger Cube - view 2.jpg
  (Size: 51.86KB, Downloaded 82 time(s))

• Attachment: Danger Cube - view 3.jpg
  (Size: 52.67KB, Downloaded 82 time(s))

• Attachment: Danger Cube - view 4.jpg
  (Size: 52.82KB, Downloaded 83 time(s))

• Attachment: Danger Cube - view 5.jpg
  (Size: 44.02KB, Downloaded 82 time(s))

Continuing with my experiments I modified the 3D model for a better fit to the watch case. It now fits exactly. It couldn't fit better if manufactured by Casio itself. The new stainless print has a very precise fit. Not only that but Shapeways also moved the sprue to the end where it's much easier to grind off. The previous stainless print had the sprue on the curved side which didn't look to good. (I'm fussy about detail) I also printed a couple colored WSF covers which came out quite nice. I'm very very happy with the results.

[SIZE=5][SIZE=3]

• Attachment: P1020364.jpg
  (Size: 197.41KB, Downloaded 122 time(s))

• Attachment: P1020358.jpg
  (Size: 171.78KB, Downloaded 121 time(s))

• Attachment: P1020360.jpg
  (Size: 155.77KB, Downloaded 122 time(s))

• Attachment: P1020361.jpg
  (Size: 114.30KB, Downloaded 121 time(s))

• Attachment: P1020362.jpg
  (Size: 94.46KB, Downloaded 122 time(s))

Hi Shapeways fans,

Spider Gear was suggested by Bram Cohen and named by José. A ball with holes is contained by a cage and six pointy gears. When the ball is turned then the gears follow. Both the ball and the gears are bi-colored. The object of the puzzle is to turn the ball such that it ends up upside down, while the gears are returned to their original position.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Twisty Puzzles Forum.
Check out the photos below.

Enjoy!

Oskar

• Attachment: Spider-Gear---view-1.jpg
  (Size: 36.75KB, Downloaded 116 time(s))

• Attachment: Spider-Gear---view-2.jpg
  (Size: 39.47KB, Downloaded 88 time(s))

• Attachment: Spider-Gear---view-3.jpg
  (Size: 40.99KB, Downloaded 91 time(s))

[Updated on: Fri, 03 May 2013 17:59 UTC]

Woo Hoo! thanks UPS and Shapeways the new arrival in the collection is a this elephant head

3D Printed Elephant Head by Dot San, on Flickr


3D Printed Animal Heads by Dot San, on Flickr

Available here

[Updated on: Thu, 02 May 2013 18:41 UTC]

They arrived in good health, though they only have one side and one edge. (Sounds like a geometric amputee.) One is in White Strong Flexible, one in polished White Strong Flexible, and one in White Detail.

The boss was impressed enough to commission the printing of a technical model for sales & marketing of one of our industrial products.

Yay, Shapeways!

• Attachment: Mobius_loops.jpg
  (Size: 217.46KB, Downloaded 115 time(s))

Hey All,

Here are a couple of designs I created to add your own flair to a Phiten necklace. This simple design has a charm ring and clips that connect between the Phiten clips.

The first is a straight forward design with clips straight across from one another. The second is an angled designed and can be doubled up to create a dual, charm design effect.









Enjoy,

Dennis - DTI Studio

• Attachment: PICT5171.JPG
  (Size: 1.59MB, Downloaded 77 time(s))

• Attachment: PICT5168.JPG
  (Size: 1.75MB, Downloaded 76 time(s))

• Attachment: PICT5169.JPG
  (Size: 1.83MB, Downloaded 78 time(s))

• Attachment: PICT5170.JPG
  (Size: 1.70MB, Downloaded 75 time(s))

[Updated on: Mon, 29 April 2013 17:24 UTC]

Hi Guy's,

I'm super excited about this "Aventador" inspired Raspberry Pi case. It was great fun to design and I hope everyone likes it as much as we do! It is only 1 piece but requires the newer Pi motherboard with the two locating holes. It features a wall mount slot and can be stacked!

Available here; http://www.shapeways.com/model/1053233/edges-raspberry-pi-ca se.html?li=my-models





Cheers,
Mark

• Attachment: IMG_3227.jpg
  (Size: 492.55KB, Downloaded 96 time(s))

• Attachment: Edge Case.jpg
  (Size: 384.37KB, Downloaded 96 time(s))

Just got these little gems in the mail! I can't decide what I want to do with them just yet, but I think I'll hang the Luigi one from my 3DS.

Mario Pendant

Luigi Pendant


Daniel

• Attachment: m1.png
  (Size: 238.41KB, Downloaded 122 time(s))

• Attachment: m3.png
  (Size: 297.98KB, Downloaded 121 time(s))

• Attachment: l1.png
  (Size: 263.57KB, Downloaded 122 time(s))

These came in on Friday, but I haven't been able to photograph them until now. These are a series of cosplay/costume/fashion horns made out of thin wsf!.
(models are as follows: The Topsy http://www.shapeways.com/model/1035561/the-topsy-costume-hor ns.html? , The Wallie http://www.shapeways.com/model/1035399/the-wallie-costume-ho rn.html , The Midge http://www.shapeways.com/model/1034975/quot-the-midge-quot-c ostume-horn.html , The Fitzi http://www.shapeways.com/model/1034908/quot-the-fitzi-quot-c ostume-horn.html , The Moxie http://www.shapeways.com/model/1034106/the-moxie-costume-hor ns.html , and The Mizzie http://www.shapeways.com/model/1034060/quot-the-mizzie-quot- costume-horn.html)

**model shots on the individual listings**

The Topsy


The Wallie


The Midge


The Fitzi


The Moxie and The Mizzie

[Updated on: Mon, 22 April 2013 01:14 UTC]

[Updated on: Sun, 21 April 2013 21:58 UTC]

Hi Shapeways fans,

Irreversible Cube is based on an idea by Christoph Lohe:
"It is just a 2x2x2 Cube, however, with the following constrains:
- only clockwise quarter turns are allowed
- after a turn on one axis (out of three), the next move, if any, will need to be done on another axis
Obviously, it is not a normal twisty puzzle as you cannot simply reverse your move sequence. It also means: the puzzle is already scrambled after a first single move from the solved state."

So if we encode
"U" = upper face 90 degrees clockwise
"F" = front face 90 degrees clockwise
"L" = left face 90 degrees clockwise
then one could legally turn e.g. "UFLUFLULUFLUFLUL" as all turns are clockwise and there are no two-same-turns-in-a-row. However, "FF" would be illegal and the second "F" move should be blocked.

Irreversible Cube exactly achieves Chris Lohe's goal. There are only single clockwise quarter turns, and any second quarter turn is blocked, only to be unlocked when another face is turned 90-degrees clockwise.

Note that the puzzle has no easy undos. Once a quarter turn clockwise has been made, one cannot undo it by turning anti-clockwise. Anti-clockwise turns are blocked by the mechanism.

Analysing the mechanism, the follow steps happen when turning a face clockwise.
1) First the turning face locks itself against turning back to it original position. From this point, one can only move forward.
2) Next the turning face unlocks the previously locked adjacent face.
3) Then, the turning face locks itself against turning back to the adjacent-faces-unlocking state.
4) Finally, the turning face blocks. Now it can only be unlocked by turning an adjacent face.

Watch the YouTube video.
Buy the puzzles at my Shapeways Shop.
Read more at the Twisty Puzzles Forum.
Read a solving analysis in this thread at the Twisty Puzzles Forum.
Check out the photos below.

Enjoy!

Oskar

• Attachment: Irreversible-Cube---view-1.jpg
  (Size: 46.86KB, Downloaded 88 time(s))

• Attachment: Irreversible-Cube---view-2.jpg
  (Size: 43.91KB, Downloaded 90 time(s))

• Attachment: Irreversible-Cube---view-3.jpg
  (Size: 46.72KB, Downloaded 88 time(s))

• Attachment: Irreversible-Cube---view-4.jpg
  (Size: 46.40KB, Downloaded 88 time(s))

• Attachment: Irreversible-Cube---view-5.jpg
  (Size: 44.95KB, Downloaded 89 time(s))

The ring:

With gold rub'n'buff applied:


Some back-story:
My ongoing fascination with Celtic knots has often made me think about the physical realities of knot patterns. I've previously explored making knots out of clay, and tying Chinese knots to explore this idea.

When I was little, my big sister brought home some Turkish puzzle rings. They were pretty and confounding. I never really got the hang of how to solve them! But when I found Shapeways, I knew i wanted to have a go at making my own puzzle rings.

My first attempt at the idea was a perfect intertwining of over-and-under loops.


My rusty 3D modeling skills meant that progress was slow... so it came with a slow and crushing realisation that this design wouldn't come apart and function as a puzzle ring in the way I'd imagined.

The next step was to do some research into how puzzle rings are constructed and how they're solved. I learned that unlike Celtic knots, puzzle rings don't follow a convention in the way that the loops alternate over- and under-lapping. One loop may go over two other loops before passing under the next.

Armed with this knowledge, I modeled the next version of the puzzle ring.


And then came the problem of unraveling these interlocked pieces to ensure that they would print properly. I tried very hard to follow how the loops would remain loooped through each other when jiggled loose. Here's what I submitted to Shapeways for printing:


A few weeks later, they arrived! I got the scissors and glue out, expecting that I'd be too incompetent to solve the rings the normal way. I also suspected that I'd gotten the loops wrong (I had). As it turns out, once the loops are correctly hooked through one another, it's not too hard to solve the ring. The white S&F was a little bit too flimsy, but the black worked quite well, and I'm hoping to do some metal prints next.


Thanks for reading about my little project! I'm working on some other Celtic-knot inspired jewellery as well (including less confusing rings), so I hope to be able to share those with you soon.

[Updated on: Sat, 20 April 2013 15:39 UTC]

Here is my first 3D printed part, thanks for looking!




Fits in place without glue!!!

[Updated on: Mon, 22 April 2013 12:09 UTC]

• Attachment: petit002.JPG
  (Size: 318.06KB, Downloaded 133 time(s))

Hi Shapeways fans,

Deeper Madness is a deeper-cut version of More Madness. It has a "deeper-than-deep-origin" mechanism, like Dave Pitcher's award-winning Rotoprism 2. Deeper Madness is a face-turning puzzle with six screws under the six turning faces. Starting from a screw, the associated visible cut at the surface is more than 90 degrees away.

Deeper Madness also answers Dave Pitcher's question whether a puzzle with a deeper-than-origin-cut mechanism can be solid. This puzzle shows that it can. Notice that there is still a controversy about what constitutes a deeper-than-origin-cut mechanism.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Twisty Puzzles Forum.
Check out the photos below.

Enjoy!

Oskar

• Attachment: Deeper-Madness---view-1.jpg
  (Size: 39.91KB, Downloaded 98 time(s))

• Attachment: Deeper-Madness---view-2.jpg
  (Size: 34.82KB, Downloaded 99 time(s))

• Attachment: Deeper-Madness---view-3.jpg
  (Size: 165.11KB, Downloaded 99 time(s))

• Attachment: Deeper-Madness---view-4.jpg
  (Size: 48.41KB, Downloaded 99 time(s))

[Updated on: Sat, 13 April 2013 11:21 UTC]

Hi everybody !

I received my model of the iconic skateboard from the 70´s (Penny or plastic Board) a couple of weeks ago.
I am using it as keyring and it looks great. The details are really good for a 6,5 cm model.
Next step is silver

Thanks Shapeways !

http://www.shapeways.com/model/888518/penny-board-miniature. html?li=my-models

• Attachment: 674x501_888518_829587_1361482858.jpg
  (Size: 78.59KB, Downloaded 123 time(s))

• Attachment: 674x501_888518_829588_1361482878.jpg
  (Size: 71.08KB, Downloaded 119 time(s))

[Updated on: Fri, 12 April 2013 15:06 UTC]

Got my pendants today - these are a result if me experimenting with 2D design. The 'rope' motif is simply some beziers rendered via Shapeways image popper; the rectangular motif an abstraction inspired by my iPad...


Steven

• Attachment: image.jpg
  (Size: 45.90KB, Downloaded 109 time(s))

• Attachment: image.jpg
  (Size: 52.43KB, Downloaded 110 time(s))

• Attachment: image.jpg
  (Size: 37.23KB, Downloaded 108 time(s))

These are 3 different pendants I created, printed in WSF, happy with the results.

• Attachment: KrF1bFgJUUB6UKY1UeJPdHBT.jpg
  (Size: 879.67KB, Downloaded 184 time(s))

• Attachment: U86FHVgP9bdD6hEF8Eb3WP9N.jpg
  (Size: 403.40KB, Downloaded 182 time(s))

• Attachment: 0S6JJTUrXbTAFJWAgAaAQHbM.jpg
  (Size: 384.72KB, Downloaded 182 time(s))

• Attachment: Tr07A7eJ4CTVNMF9tXa6RtrA.jpg
  (Size: 430.27KB, Downloaded 181 time(s))

Hi Shapeways fans,

Roadblock Cube was suggested by Will in this video. Effectively, it is a 2x2x6 in three directions.

Watch the YouTube video.
Buy the puzzle at my Shapeways Shop.
Read more at the Twisty Puyzzles Forum.
Check out the photos below.

Enjoy!

Oskar

• Attachment: Roadblock-Cube---view-1.jpg
  (Size: 49.69KB, Downloaded 77 time(s))

• Attachment: Roadblock-Cube---view-3.jpg
  (Size: 49.33KB, Downloaded 76 time(s))

• Attachment: Roadblock-Cube---view-4.jpg
  (Size: 47.45KB, Downloaded 76 time(s))

• Attachment: Roadblock-Cube---view-5.jpg
  (Size: 49.05KB, Downloaded 77 time(s))

• Attachment: Roadblock-Cube---view-6.jpg
  (Size: 43.98KB, Downloaded 77 time(s))

The pendant has arrived and my wife loves it.





Get the pendant here.

[Updated on: Sat, 06 April 2013 06:03 UTC]

I received two of my rings last week and received the third. All are made from glossy silver and each are from a different designer.

This one on the left is from Phayart, the middle is from Missing Sock Design, and the one on the right is from Crazy Random Crapinstance.







I hope to paint them orange soon and get the inside of the bands polished, since they were not.

• Attachment: image.jpg
  (Size: 892.49KB, Downloaded 117 time(s))

• Attachment: image.jpg
  (Size: 949.56KB, Downloaded 115 time(s))

• Attachment: image.jpg
  (Size: 838.17KB, Downloaded 116 time(s))

[Updated on: Thu, 04 April 2013 14:22 UTC]

This is another iPad3 Front Facing Speaker design. This one was created to resemble a Grand Piano.

Again, this simply slips on the side of the iPad3 to project the sound forward. (Check out the video below to hear how it works)

http://www.youtube.com/watch?v=gwMUF1iGuOM

• Attachment: ffs_grand_closed.png
  (Size: 418.58KB, Downloaded 64 time(s))

My latest iPad3 front facing speaker.

I designed this speaker to look like a Marshall Double Stack Amplifier. The speaker simply slips on the side of the iPad3 to project the sound forward.

http://www.youtube.com/watch?v=XOyyHXpxTNU

• Attachment: ffs_ipad3_marshall_pic03.png
  (Size: 439.12KB, Downloaded 66 time(s))

[Updated on: Wed, 03 April 2013 02:46 UTC]

hi there

today my first piece of jewelry arrived and i am very satisfied!
it looks even better than i suspected and i thank all the wonderful people at shapeways for the great work.





primitives from my models

i love this site, everything works fine and is great (i mean: from uploading the stuff, presenting it until receiving there is so less friction - even that is an experience for itself!)

have a nice one,

david


p.s.: when you want to read the story behind this piece (in german), then go this way: http://davidramirer.twoday.net/stories/primitives/

[Updated on: Tue, 02 April 2013 23:38 UTC]

Even guitars need to dress up from time to time.

Customize your guitar with this bow tie add on. Just snap it in place and rock out in style.

• Attachment: PICT5126.JPG
  (Size: 2.53MB, Downloaded 105 time(s))

• Attachment: PICT5125.JPG
  (Size: 2.02MB, Downloaded 104 time(s))

Want to show your love of baseball while playing your guitar? Customize your guitar with this volume/tone knob that looks like a baseball.

I added small knobs on the edges to help with spinning the knob and it worked perfect. (Knobs shown on my 1982 custom, Lotus guitar)

Just pop off your old knobs and add a baseball look to your guitar. (More designs to come)

• Attachment: PICT5123.JPG
  (Size: 2.33MB, Downloaded 81 time(s))

• Attachment: PICT5124.JPG
  (Size: 2.26MB, Downloaded 81 time(s))

Hi Twisty Puzzles fans,

Total Eclipse is a spherical cage with two rings inside. The object is to get the two rings out. That is difficult, as each of the rings is solving a maze.

The name of the puzzle refers to the total eclipse of the sun in 1999, which was visible in Europe. The puzzle was developed earlier that year.

Watch the YouTube video of the nylon version.
Watch the YouTube video of the metal version.
Buy the nylon version at my Shapeways Shop.
Buy the metal version at my Shapeways Shop.
Read more at the Non-Twisty Puzzles Forum.
Check out the photos below.

Enjoy!

Oskar

• Attachment: Total-Eclipse---view-1.jpg
  (Size: 37.08KB, Downloaded 92 time(s))

• Attachment: Total-Eclipse---view-7.jpg
  (Size: 35.54KB, Downloaded 90 time(s))

• Attachment: Total-Eclipse-metal-view-1.jpg
  (Size: 74.49KB, Downloaded 91 time(s))

• Attachment: Total-Eclipse-metal-view-6.jpg
  (Size: 69.52KB, Downloaded 89 time(s))

[Updated on: Sat, 30 March 2013 16:31 UTC]

Just received my latest design in the mail: a lapel pin featuring the Vault logo from the video game series Borderlands.



For those who are interested, it's available for purchase in my shop here: http://www.shapeways.com/model/974863/borderlands-vault-logo -lapel-pin-v-1-0.html

• Attachment: IMAG0482 - 800x478.jpg
  (Size: 267.90KB, Downloaded 121 time(s))

[Updated on: Fri, 29 March 2013 21:33 UTC]

Wanna play disc golf but your stuck in a cubicle all day? Check out this mini disc golf basket for use in a cubicle.

I designed this Disc Golf Basket to attach to the walls of a office cubicle. I first created this just as a fun design for my love of disc golf but later decided to make it useful. There are hooks at the top to hold paper clips which also makes it look like the chains on a disc golf basket.

I also created a small disc golf disc if you want to try your hand at a game of mini disc golf.

• Attachment: disc_golf_cubicle_basket.png
  (Size: 969.13KB, Downloaded 81 time(s))