Search Search  
Today's Messages (OFF)  | Unanswered Messages (ON)

Forum: Work in progress
 Topic: Ring Crosses
Ring Crosses [message #123672] Sun, 04 October 2015 10:49 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Hey

I made this ring so to be offered in all materials (i was interested to pass easily the automated checks specially in steel versions which it did) and to be as cheap as it can get.

IN RAW BRASS

index.php?t=getfile&id=119126&private=0

IN POLISHED GOLD STEEL

index.php?t=getfile&id=119127&private=0

Hope you like it. You can see it here: https://www.shapeways.com/product/HCLG9M3NQ/ring-crosses?li= shop-results&optionId=57973099

[Updated on: Mon, 12 October 2015 19:16 UTC] by Moderator

 Topic: Black Hole A & B
Black Hole A & B [message #123414] Mon, 28 September 2015 19:37 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
My love for physics and science in general and especially the mysterious objects such as BLACK HOLES led me to design two more models wirteframed (one with a thin wires "BLACK HOLE A" and one with thicker wires "BLACK HOLE B" to pass in more materials)

You can have a taste below:

BLACK HOLE A


https://www.shapeways.com/product/6NCZW33AT/black-hole-a?li= shop-results&optionId=57933360

index.php?t=getfile&id=118295&private=0

index.php?t=getfile&id=118296&private=0

index.php?t=getfile&id=118297&private=0

BLACK HOLE B

https://www.shapeways.com/product/SS999LFAN/black-hole-b

index.php?t=getfile&id=118298&private=0

index.php?t=getfile&id=118299&private=0

Thank you and pls feedback for questions comments etc...

[Updated on: Mon, 12 October 2015 19:18 UTC] by Moderator

 Topic: Black Hole (Wireframed)
Black Hole (Wireframed) [message #123378] Sun, 27 September 2015 21:24 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Hey,

Check out my latest creation and pls feedback

index.php?t=getfile&id=118182&private=0

index.php?t=getfile&id=118183&private=0

index.php?t=getfile&id=118184&private=0

index.php?t=getfile&id=118185&private=0

index.php?t=getfile&id=118186&private=0

you can find it here in more colors and materials https://www.shapeways.com/product/JPV33YA6W/black-hole-wiref rame?optionId=57927446

THANK YOU!

[Updated on: Mon, 12 October 2015 19:17 UTC] by Moderator

 Topic: Sword of Life Pendant
Sword of Life Pendant [message #123354] Sat, 26 September 2015 19:52 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Hey,

I made a sword (in two versions). Check them out and pls feedback

index.php?t=getfile&id=117977&private=0

index.php?t=getfile&id=117978&private=0

index.php?t=getfile&id=117979&private=0

index.php?t=getfile&id=117980&private=0


You can find them here https://www.shapeways.com/product/83HD5TE64/sword-of-life-pe ndant?li=shop-results&optionId=57919551

and here https://www.shapeways.com/product/YQ2C7PAP8/sword-of-life-pe ndant-raw-style?li=shop-results&optionId=57919827

Personally I prefer the raw styled version (the "noisy" one). It looks like someone have discovered it during an excavation process in an ancient land. :)
I am also happy with the result cause they are quite cheap in raw materials like raw brass and raw bronze.

[Updated on: Mon, 12 October 2015 19:17 UTC] by Moderator

 Topic: Yin Yang Pendant
Yin Yang Pendant [message #123195] Tue, 22 September 2015 18:45 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Hi,

Have a look at this:

index.php?t=getfile&id=117449&private=0

index.php?t=getfile&id=117450&private=0

index.php?t=getfile&id=117451&private=0

index.php?t=getfile&id=117452&private=0

index.php?t=getfile&id=117453&private=0

you can see it in more materials here: https://www.shapeways.com/product/PUBRV3WWG/yin-yang-pendant ?li=shop-results&optionId=57887120

and.. pls comment if you like it or not :)

[Updated on: Mon, 12 October 2015 19:17 UTC] by Moderator

 Topic: Hurricane (Decorative)
Hurricane (Decorative) [message #123114] Sun, 20 September 2015 17:47 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Hi,

I' ve just upload my latest designs - a hurricane in different versions - Please comment if you like it or not :)

index.php?t=getfile&id=117239&private=0

index.php?t=getfile&id=117240&private=0

index.php?t=getfile&id=117241&private=0

These models are available in other materials (except from steel metals) also and you can see them here

https://www.shapeways.com/product/XJYBQE6DX/hurricane-solid? li=shop-results&optionId=57876532

https://www.shapeways.com/product/7B878AGJ3/hurricane-wirefr ame-1?li=shop-results&optionId=57876815

https://www.shapeways.com/product/D5SL7FKZC/hurricane-wirefr ame-2?li=shop-results&optionId=57877285

[Updated on: Mon, 12 October 2015 19:16 UTC] by Moderator

 Topic: Heartonium
Heartonium [message #122947] Wed, 16 September 2015 14:54 UTC
avatar abhimanyud3dx  is currently offline abhimanyud3dx
Messages: 0
Registered: December 2012
Go to my shop
Junior Member
https://images1.sw-cdn.net/model/picture/625x465_3781099_12048953_1442137739.jpg
https://images4.sw-cdn.net/model/picture/625x465_3781099_12048662_1442137779.jpg
https://images2.sw-cdn.net/model/picture/625x465_3781099_12048663_1442137740.jpg
http://shpws.me/JV7W
Review and critiques will be appreciated

[Updated on: Wed, 16 September 2015 15:01 UTC]

 Topic: Feynmann Diagram Pendant
Feynmann Diagram Pendant [message #122640] Fri, 11 September 2015 06:55 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Hi,

Trully unique SCIENTIFIC pendant i have designed some time ago:

index.php?t=getfile&id=115913&private=0

index.php?t=getfile&id=115914&private=0

index.php?t=getfile&id=115915&private=0

index.php?t=getfile&id=115917&private=0

You can find it here https://www.shapeways.com/product/LBT7XZLE5/pendant-feynman- diagram-projection?li=shop-results&optionId=55956569

and here in a little diffrent version https://www.shapeways.com/product/WAV82YF6V/pendant-feynman- diagram?li=shop-results&optionId=55956457


in a variety of materials

SUCCESSFULY PRINTED IN FLEXIBLE PLASTIC

 Topic: Gothic Cross Pendant
Gothic Cross Pendant [message #122618] Thu, 10 September 2015 20:19 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Check this out:

index.php?t=getfile&id=115857&private=0

index.php?t=getfile&id=115858&private=0

index.php?t=getfile&id=115859&private=0

index.php?t=getfile&id=115860&private=0


You can find this textured curved cross here: https://www.shapeways.com/product/8KSLSBBUA/gothic-cross-pen dant?li=shop-results&optionId=57815575

and you can have its ring version also here: https://www.shapeways.com/product/7ZQW2GVJB/ring-medieval-go thic-ring?li=shop-results&optionId=57789376

All feedbacks are welcome.. Thank you

[Updated on: Thu, 10 September 2015 21:39 UTC] by Moderator

 Topic: Super-Short stories and poems- Open for suggestions
Super-Short stories and poems- Open for suggestions [message #122514] Wed, 09 September 2015 03:50 UTC
avatar maren_robison  is currently offline maren_robison
Messages: 0
Registered: September 2015
Go to my shop
Junior Member
As a quick look at my shop will tell you, I'm a big fan of tiny literary works. So far I've used:
"I just saw my reflection blink."
"Epitaph: Foolish humans never escaped Earth."
"Lighght"
And an 'm' with an extra bump, which is either the world's shortest poem or a cool image.

I'm currently seeking both feedback on my existing products, and suggestions for super-short literary works for me to use in the future. The only catch is that I have to get permission from the author before using a quote, so I can't promise that all submissions will be used.

I'll be asking the same thing on two of the writing websites I'm on, but I figured I should bring it up here, too.


brevity is the soul of AWESOME!
 Topic: An Ancient Ring Just for Kings
An Ancient Ring Just for Kings [message #122392] Sun, 06 September 2015 21:54 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Check this out:

index.php?t=getfile&id=115336&private=0

index.php?t=getfile&id=115337&private=0

index.php?t=getfile&id=115338&private=0

index.php?t=getfile&id=115341&private=0

index.php?t=getfile&id=115340&private=0

You can find it here: https://www.shapeways.com/product/7ZQW2GVJB/ring-medieval-go thic-ring?li=shop-results&optionId=57789376



and remember... THIS RING IS ONLY FOR KINGS WITH A HEART OF STEEL!!!

PS: Available also without texture and in varius sizes upon request!

[Updated on: Mon, 12 October 2015 19:19 UTC] by Moderator

 Topic: Helicoid statue (Math Art)
Helicoid statue (Math Art) [message #122302] Fri, 04 September 2015 19:39 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Check out this

index.php?t=getfile&id=115141&private=0

index.php?t=getfile&id=115142&private=0

index.php?t=getfile&id=115143&private=0

index.php?t=getfile&id=115144&private=0

index.php?t=getfile&id=115145&private=0

you can find it in my shop here: https://www.shapeways.com/product/ETGV6FM6C/helicoidal-wired ?li=shop-results&optionId=57778275

Please feedback and don't forget to see the animation rendering of the model (it's really cool)!

 Topic: Cross 3D Pendant
Cross 3D Pendant [message #122145] Wed, 02 September 2015 20:26 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Check this textured cross:

index.php?t=getfile&id=114800&private=0

index.php?t=getfile&id=114801&private=0

index.php?t=getfile&id=114802&private=0

index.php?t=getfile&id=114803&private=0

index.php?t=getfile&id=114804&private=0

with beautiful renders by Shapeways!

You can find it here: https://www.shapeways.com/product/KLWPWBVN3/cross-3d-pendant ?li=shop-results&optionId=57764619

Give some feedback pls.

Thank you

[Updated on: Mon, 12 October 2015 19:19 UTC] by Moderator

 Topic: Jewelry designs!
Jewelry designs! [message #121781] Thu, 27 August 2015 09:50 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Hey,

Check out some of my jewelry designs. Hope you like it

Lion Ring (in Low Poly)

index.php?t=getfile&id=113813&private=0

index.php?t=getfile&id=113814&private=0

Ring 7

index.php?t=getfile&id=113815&private=0

index.php?t=getfile&id=113816&private=0

RING KARYSTOS STONE

"As a young kid I remember that my father always liked to decorate all our cottages which have lived in with that kind of stone.

I like this kind of pattern also (It is a voronoi pattern actually) so I have deciced to design a ring with Karystos Stones which I am pretty sure that many of you will love It's simplicity and uniqueness."



index.php?t=getfile&id=113817&private=0

You can find them in my shop here https://www.shapeways.com/shops/dreamof3d

 Topic: Check out my new jewels!
Check out my new jewels! [message #121645] Mon, 24 August 2015 23:04 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Hey

Some of my latest designs that you can find here: https://www.shapeways.com/shops/dreamof3d

index.php?t=getfile&id=113404&private=0

Thanx

  • Attachment: 2582015.png
    (Size: 1.02MB, Downloaded 74 time(s))

 Topic: Don't forget to see my work
Don't forget to see my work [message #121003] Wed, 12 August 2015 11:47 UTC
avatar shariff  is currently offline shariff
Messages: 95
Registered: February 2013
Go to my shop
Member
hey guys don't forget to see my work especially my mugs and planters and cups (for now in plastic until porcelain material is active) Also much more will be back online when the porcelain material is back online.

my work
(mug part coming back as soon as porcelain material is available)

https://images1.sw-cdn.net/model/picture/625x465_1732933_2239000_1429714523.jpg

https://images3.sw-cdn.net/model/picture/625x465_1956049_2797518_1429740596.jpg

https://images1.sw-cdn.net/model/picture/625x465_1042382_1651291_1429686482.jpg
(ball now available in a 2.5cm size)

 Topic: Love Makes You Crazy!!
Love Makes You Crazy!! [message #120887] Mon, 10 August 2015 19:49 UTC
avatar jordanbanks  is currently offline jordanbanks
Messages: 200
Registered: January 2013
Go to my shop
Senior Member
Here is a love pendant I have been working on and plan on buying soon; it is a symbol of how much love makes you crazy cause we all can relate to that. I added the new customization to the model as well.

https://www.shapeways.com/product/PAAE8SPSV/crazy-for-love-p endant?key=fec0c8358c6df5cae7dbbff0f81e91f5

index.php?t=getfile&id=111393&private=0index.php?t=getfile&id=111394&private=0

  • Attachment: heart.JPG
    (Size: 20.22KB, Downloaded 108 time(s))

  • Attachment: heart2.JPG
    (Size: 22.10KB, Downloaded 113 time(s))

  • Attachment: heart3.JPG
    (Size: 10.52KB, Downloaded 24 time(s))

  • Attachment: heart4.JPG
    (Size: 19.99KB, Downloaded 27 time(s))


Let make fantasy a reality!
 Topic: New generation of bracelets
New generation of bracelets [message #120260] Thu, 30 July 2015 16:44 UTC
avatar panguver  is currently offline panguver
Messages: 479
Registered: November 2013
Go to my shop
Senior Member
Hi,

https://www.shapeways.com/shops/amalham?sort=newest&sect ion=Bracelets-metals&s=0

I have 500+ similar bracelets already and if you want buy similar items in needed size, form and ornament - please, not hesitate ask me, it's free. I will create models in similar form, with one of 150+ my own ornaments for free and place it for sale on my Shapeways shop. Most of my bracelets will costs about $100-150 in polished silver.

New bracelet will created for your size and optimized for low cost (will not scaled from current model). At present time I am not ready to place all my huge collection of bracelets here because you (as buyer) not able scale it to needed size and uploading process will too long story also.

Also I finished my new solid ring/bracelet creator and ready make models for free also. Several such solid bracelets already in my shops. Customizable (via CustomMaker) bracelets coming soon.

Thank you.

Sincerely,
Panguver, shop owner.

PS. If you want order and resale it locally, I am ready to give you all needed rights.

index.php?t=getfile&id=109859&private=0
index.php?t=getfile&id=109858&private=0
index.php?t=getfile&id=109860&private=0
index.php?t=getfile&id=109862&private=0
index.php?t=getfile&id=109863&private=0

[Updated on: Thu, 30 July 2015 18:26 UTC] by Moderator

 Topic: Jacklope
Jacklope [message #119390] Thu, 16 July 2015 19:11 UTC
avatar Myth_Conceptions  is currently offline Myth_Conceptions
Messages: 10
Registered: September 2012
Go to my shop
Junior Member
Hello,

This is a character I'm working on for 3D color printing. He was not originally a 3D printing project, but I no longer have a use for him and thought he was fun enough for a possible miniature.

Does anyone have any thoughts or suggestions?

  • Attachment: jacklope.jpg
    (Size: 151.07KB, Downloaded 68 time(s))

 Topic: Check out my work on jewelry! - Exclusive offer from my shop
Check out my work on jewelry! - Exclusive offer from my shop [message #119122] Sun, 12 July 2015 07:53 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Hey,

I have an exclusive offer for you:


By ordering ANY product/model from my shop in Shapeways http://www.shapeways.com/shops/dreamof3d a model/product, i can offer you a second one with no markup fee for me!!!!!
Sent me a private message (or to nikolaosramos@hotmail.com) mentioning the model/product you are interested in (material, color etc) just to remove my mark up fee.
This offer applies till 31th of July 2015.

My latest work:

PENDANT SPADES

index.php?t=getfile&id=107201&private=0

index.php?t=getfile&id=107202&private=0

PENDANT SNOWFLAKE 001

index.php?t=getfile&id=107203&private=0

PENDANT SNOWFLAKE 002

index.php?t=getfile&id=107204&private=0

KEEP CREATING....

 Topic: Check out some of my latest models!
Check out some of my latest models! [message #118689] Mon, 06 July 2015 11:51 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Hey!!

Check out some of my latest models

index.php?t=getfile&id=106409&private=0

index.php?t=getfile&id=106410&private=0

index.php?t=getfile&id=106411&private=0

index.php?t=getfile&id=106412&private=0

index.php?t=getfile&id=106413&private=0

Please if you lilke them support my effort (I live in Greece with my family having very difficult economicals problems due to the bad situation goin on here in Greece)

Thank you very much in advance for your support!

and don't forget to visit my shop regularly which is updated often with new models/products

https://www.shapeways.com/shops/dreamof3d

[Updated on: Mon, 06 July 2015 11:58 UTC]

 Topic: Playing with water - next stage
Playing with water - next stage [message #118656] Sun, 05 July 2015 15:53 UTC
avatar nigelren  is currently offline nigelren
Messages: 27
Registered: October 2014
Go to my shop
Junior Member
My previous post was for a piece for my just completed Fine Art degree show, this piece went down well and has inspired me to think of what I can do with this idea. Some ramblings follow - which I would appreciate some feedback on.

This is something which (with a few last tweaks) should be ready to realise. The idea being for a table decoration which fits into a champagne bottle and at the moment the design has a test tube set into it. This should allow a flower to be put into it - do you think it needs it (perhaps create a few choices -with and without).

Also - not having drunk too much champagne - are the holes in bottles different sizes?

I can create several designs which allows for some variety - I might as well, it's a bit of work for each one, but will give some choice... or am I just making more work for myself.

Anyway some initial renderings to see how it may look.

Thanks for any feedback :)

  • Attachment: test3.jpg
    (Size: 738.07KB, Downloaded 35 time(s))

  • Attachment: test3.2.jpg
    (Size: 257.69KB, Downloaded 38 time(s))

 Topic: Rating For Hanging Model Of DeviantArt Logo Pendant ( Keychain )
Rating For Hanging Model Of DeviantArt Logo Pendant ( Keychain ) [message #116264] Wed, 27 May 2015 14:16 UTC
avatar phnghue  is currently offline phnghue
Messages: 59
Registered: May 2015
Go to my shop
Member
Nine Models: http://phnghue.deviantart.com/art/Vote-DeviantArt-Keychain-H anging-Type-Sold-532903708
Survey Page: https://www.surveymonkey.com/s/3GBDYF3
It's beta, but you can buy it here: https://www.shapeways.com/search?q=DA+DeviantArt+Keychain+No rmal
I will design with old logo soon.

Thank you!

http://orig09.deviantart.net/247c/f/2015/133/f/1/keychain_deviantart_logo_2_normal_ch1_sold___by_phnghue-d8t7ce8.png
http://orig14.deviantart.net/e5a7/f/2015/133/a/8/keychain_deviantart_logo_2_normal_ch7_sold___by_phnghue-d8t7eu8.png
http://orig08.deviantart.net/24bb/f/2015/133/a/e/keychain_deviantart_logo_2_normal_ch4_sold___by_phnghue-d8t7e7g.png
http://orig07.deviantart.net/3447/f/2015/133/c/e/keychain_deviantart_logo_2_normal_ch8_sold___by_phnghue-d8t7ez0.png
http://orig10.deviantart.net/4e3f/f/2015/133/4/9/keychain_deviantart_logo_2_normal_ch2_sold___by_phnghue-d8t7czv.png
http://orig15.deviantart.net/8568/f/2015/133/4/0/keychain_deviantart_logo_2_normal_ch9_sold___by_phnghue-d8t7f3t.png
http://img11.deviantart.net/29f6/i/2015/133/b/4/vote_deviantart_keychain_hanging_type__sold___by_phnghue-d8t9z4s.png

  • Attachment: DA-CH1.jpg
    (Size: 152.51KB, Downloaded 19 time(s))

  • Attachment: DA-CH7.jpg
    (Size: 128.15KB, Downloaded 18 time(s))

  • Attachment: DA-CH4.jpg
    (Size: 152.13KB, Downloaded 21 time(s))

  • Attachment: DA-CH8.jpg
    (Size: 142.85KB, Downloaded 17 time(s))

  • Attachment: CH1..9.png
    (Size: 64.39KB, Downloaded 20 time(s))

[Updated on: Fri, 29 May 2015 02:10 UTC]


Yesi
 Topic: Why different sharpness on different sides?
Why different sharpness on different sides? [message #116145] Mon, 25 May 2015 12:40 UTC
avatar Tresob  is currently offline Tresob
Messages: 0
Registered: December 2012
Go to my shop
Junior Member
I've noticed that a lot of my prints end up having one side where the edges are very sharp and flat, and another side that tends to be softer and rounder.

I suspect it has something to do with the orientation of the object when it is printed, but I'm not sure if I have any control over that.

Any thoughts on how to anticipate this during the rendering process?
 Topic: Newbie: Bracket for Juniper Router, is 3mm thick enough?
Newbie: Bracket for Juniper Router, is 3mm thick enough? [message #115726] Wed, 20 May 2015 12:29 UTC
avatar ANDY2015  is currently offline ANDY2015
Messages: 0
Registered: May 2015
Go to my shop
Junior Member
Hi,

This is the first 3D object I have made, I did it by measuring and designing in 2D in illustrator, then I rebuilt it in 3D in Autodesk 123D design. Hopefully I got all of the measurements right. It's a bracket for a router so it can be mounted in a comms cabinet.

https://www.shapeways.com/product/6SRQCAGJT/srx100-juniper-b racket?li=shop-inventory&optionId=56746314

I was just wondering if someone could have a quick look at the design, you don't even need to download it really, I just need to know if it will be strong enough based on what you know about the strength of "Strong and flexible" plastic material? The front and side are 3mm thick plastic and I added a triangle at the join and an extra bit on the longer side of the bracket.

Do you guys think this will be strong enough to hold a small router? The router weighs 844 grams.

Thanks for any tips

(PS I uploaded the STL file)

 Topic: I finished my zodiacs about a week ago
I finished my zodiacs about a week ago [message #115030] Sun, 03 May 2015 22:48 UTC
avatar neptuneideas  is currently offline neptuneideas
Messages: 42
Registered: September 2014
Go to my shop
Member
The 12 signs pendants
index.php?t=getfile&id=99277&private=0

  • Attachment: zodiacs.jpg
    (Size: 2.48MB, Downloaded 55 time(s))


instagram: @neptuneideas
 Topic: Quadcopter Frame Thickness WSF Suggestions Needed
Quadcopter Frame Thickness WSF Suggestions Needed [message #113637] Fri, 10 April 2015 18:24 UTC
avatar Plumguy  is currently offline Plumguy
Messages: 0
Registered: November 2010
Go to my shop
Junior Member
Any suggestions as to the thickness of a simple quadcopter frame
should be using WSF? I was thinking of 3mm.
Thanks !

[Updated on: Fri, 10 April 2015 20:10 UTC]

 Topic: .
. [message #113626] Thu, 09 April 2015 15:40 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
...

[Updated on: Mon, 28 March 2016 15:06 UTC]

 Topic: 3D VISION shop - My latest pendants designs
3D VISION shop - My latest pendants designs [message #113067] Mon, 30 March 2015 18:46 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
11. GEOMETRIC UNITY PENDANT

index.php?t=getfile&id=95260&private=0

you can find it here: https://www.shapeways.com/product/W6EK2TRSC/geometric-unity- pendant?li=shop-results&optionId=56037895

12. DOUBLE GEOMETRIC PENDANT

index.php?t=getfile&id=95261&private=0

you can find it here: https://www.shapeways.com/product/5ASPQAH2R/double-geometric -pendant?li=shop-results&optionId=56036959


13. GEOMETRIC PENDANT

index.php?t=getfile&id=95262&private=0

you can find it here: https://www.shapeways.com/product/5T5DH5K6N/geometric-pendan t?li=shop-results&optionId=56036886

you can find those and others in my shop here: https://www.shapeways.com/shops/dreamof3d?sort=newest&s= 0

 Topic: Double Loop ring
Double Loop ring [message #112773] Tue, 24 March 2015 21:43 UTC
avatar jacobthejones  is currently offline jacobthejones
Messages: 0
Registered: August 2013
Go to my shop
Junior Member
My friend gave me the idea for this ring. I'm fairly sure it will be fine structurally, but I'd love feedback about the design. Tweaks to the models, names, whatever. Thanks!
index.php?t=getfile&id=94519&private=0

  • Attachment: 006b.png
    (Size: 751.85KB, Downloaded 80 time(s))

 Topic: Doge Buddha :D
Doge Buddha :D [message #112729] Mon, 23 March 2015 21:04 UTC
avatar kipiripi  is currently offline kipiripi
Messages: 0
Registered: January 2014
Go to my shop
Junior Member
Here is my latest design DOGE BUDDHA :) Love him to be Loved ... http://shpws.me/GO35

https://images3.sw-cdn.net/model/picture/625x465_3262840_9649602_1427144391.jpg
https://images1.sw-cdn.net/model/picture/625x465_3262840_9649601_1427144391.jpg
https://images3.sw-cdn.net/model/picture/625x465_3262840_9648455_1427144489.jpg


https://instagram.com/ercingunduz
 Topic: FISHES PENDANT
FISHES PENDANT [message #112559] Fri, 20 March 2015 10:44 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
Check out my latest design

index.php?t=getfile&id=93917&private=0

index.php?t=getfile&id=93918&private=0

index.php?t=getfile&id=93919&private=0


All comments are welcome!

 Topic: Mascot
Mascot [message #112349] Tue, 17 March 2015 14:21 UTC
avatar Michael_Teiniker  is currently offline Michael_Teiniker
Messages: 81
Registered: September 2014
Go to my shop
Member
I've been working on this for a while after hours.. It is a Carter Hoffman college mascot from the 1950's. The Seaton Hall statue of the pirate has never been found, only a photostat of the statue has been recovered. My mission is to create a 4 inch replica of what the carving may have looked like. This is what the mascot photocopy looks like..not much to go on. Once completed it will be printed and then most likely carved out of wood, hopefully to complete the collection.index.php?t=getfile&id=93475&private=0index.php?t=getfile&id=93476&private=0

  • Attachment: anricatalog.jpg
    (Size: 8.70KB, Downloaded 72 time(s))

  • Attachment: 2.png
    (Size: 32.58KB, Downloaded 72 time(s))

 Topic: GEOMETRIC PENDANT & DOUBLE GEOMETRIC PENDANT
GEOMETRIC PENDANT & DOUBLE GEOMETRIC PENDANT [message #111873] Mon, 09 March 2015 10:55 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
I have just finished this:

index.php?t=getfile&id=92392&private=0

index.php?t=getfile&id=92393&private=0

index.php?t=getfile&id=92394&private=0

index.php?t=getfile&id=92395&private=0

all comments are welcome!

 Topic: Request your own custom Text on a nice and CHEAP golden ring! + example 'I Love You' Ring
Request your own custom Text on a nice and CHEAP golden ring! + example 'I Love You' Ring [message #111781] Sun, 08 March 2015 22:40 UTC
avatar InZert  is currently offline InZert
Messages: 0
Registered: February 2015
Go to my shop
Junior Member
Now you can custom-make your own rings!
https://www.shapeways.com/product/XFGF6AUN8/ring-your-text-h ere-16-5cm-0-65-quot-size-6?li=shop-results&optionId=560 33559
https://www.shapeways.com/product/BQRW34Q65/ring-i-love-you- 16-5cm-0-65-quot-size-6?optionId=56033322
You only have to send me a PM or mail me at inzertgraphics@gmail.com with your text and I will prepare your ring in a few days.
All these possibilities come with an impossible price of only $ 315,- for Full 18K gold!

http://i59.tinypic.com/2hs5ksh.png

You can put the name of yourself, or anyone you hold dear on the ring to keep them always close to you.
Or you can choose to give the ring away as an original birthday gift.
It is also possible to write a short text on your ring that means a lot for yourself or your dearest people.
Due to the wide range of materials you can choose from, there is a ring available for anyone's taste and budget!

[Updated on: Mon, 09 March 2015 07:20 UTC]


InZert Graphics, ... InZert Life.
 Topic: 'Endless Flow' - Golden Ring (other materials also available)
'Endless Flow' - Golden Ring (other materials also available) [message #111752] Sun, 08 March 2015 02:19 UTC
avatar InZert  is currently offline InZert
Messages: 0
Registered: February 2015
Go to my shop
Junior Member
Hello all,

Herewith I present my newest ring design called 'Endless Flow'.

Also available in other materials, even for $ 5,- in plastics (ideal as test material before buying the golden version).
Next to that I can adjust this ring easilly into any size you request, to ensure a perfect fit!

I(m curious to find out what you think of it.
Thank you!

Click this link for more details and all material possibilities!

https://www.shapeways.com/product/ZZBBY27TM/endless-flow?li= shop-results&optionId=56030039

http://i58.tinypic.com/2sbmse9.png

[Updated on: Sun, 08 March 2015 10:38 UTC]


InZert Graphics, ... InZert Life.
 Topic: NEURON PENDANT
NEURON PENDANT [message #111702] Fri, 06 March 2015 21:48 UTC
avatar Nickolaos  is currently offline Nickolaos
Messages: 73
Registered: August 2013
Go to all my models
Member
I was always fascinated by science so i made a neuron pendant. Check it out.

index.php?t=getfile&id=92099&private=0

index.php?t=getfile&id=92100&private=0

index.php?t=getfile&id=92101&private=0

index.php?t=getfile&id=92102&private=0

pls comment anything you like

 Topic: Jaguar Pendant
Jaguar Pendant [message #111674] Fri, 06 March 2015 11:39 UTC
avatar el_Lopez  is currently offline el_Lopez
Messages: 67
Registered: March 2010
Go to my shop
Member
I've got this jaguar bust that I created a year ago that I would like to turn into a pendant.
I'm not sure how to make it lay across the skin though.
I've thought about rounding out the neck but that doesn't look very attractive.
index.php?t=getfile&id=92004&private=0
index.php?t=getfile&id=92005&private=0
index.php?t=getfile&id=92006&private=0
index.php?t=getfile&id=92008&private=0
index.php?t=getfile&id=92009&private=0

What do you ugys think? Also what's the best way to attach this to a chain?
A loop in the middle or through the ears.

Anyone willing to do a paintover?

  • Attachment: 1.png
    (Size: 1.04MB, Downloaded 72 time(s))

  • Attachment: 2.png
    (Size: 1.14MB, Downloaded 72 time(s))

  • Attachment: 3.png
    (Size: 1.11MB, Downloaded 74 time(s))

  • Attachment: 5.png
    (Size: 0.99MB, Downloaded 76 time(s))

  • Attachment: 6.png
    (Size: 1.04MB, Downloaded 76 time(s))

 Topic: Dont forget to see my works
Dont forget to see my works [message #111623] Thu, 05 March 2015 16:50 UTC
avatar shariff  is currently offline shariff
Messages: 95
Registered: February 2013
Go to my shop
Member
Hey guys dont forget to see my designs and let me know your thoughts I should be updating my portfolio soon.

Shariffs portfolio

https://images4.sw-cdn.net/model/picture/625x465_2421146_4254798_1407761167.jpg

https://images3.sw-cdn.net/model/picture/290x218_1381909_1384511_1380606337.jpg

https://images3.sw-cdn.net/model/picture/290x218_960869_1237870_1391426390.jpg

................and much more.
 Topic: Getting Past Maya and Ready to Print
Getting Past Maya and Ready to Print [message #111480] Wed, 04 March 2015 03:07 UTC
avatar joshuagilbreath  is currently offline joshuagilbreath
Messages: 0
Registered: October 2012
Go to my shop
Junior Member
Howdy all, I am needing a little help getting my models out of Maya and print ready. These chairs are intended to be used as Wedding Cake toppers, so I would like them only to be about 3.5-4 inches tall. I am also a little lost in regards to the best practice for shelling the two models.

Here is a preview of the chairs.
http://img.photobucket.com/albums/v611/agentjosh77/Chairs_Preview_zpskaftivvx.jpg

Any advice would be wonderful. I exported each chair as an OBJ but the model preview in the Shapeways webapp was pretty broken. I have attached the Maya file if anyone would like to review the file.

Thank you all! I appreciate the assistance!

  • Attachment: Up_Chairs.mb
    (Size: 1.87MB, Downloaded 36 time(s))

[Updated on: Wed, 04 March 2015 03:10 UTC]

Pages (8): [ «    1  2  3  4  5  6  7  8    »]

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.