Home » Community » Work in progress » Bandit Skull Ring
Search Search  
Show: Today's Messages    Show Polls    Message Navigator
Bandit Skull Ring [message #47948] Sun, 06 May 2012 03:40 UTC Go to next message
avatar SGDesigns  is currently offline SGDesigns
Messages: 358
Registered: July 2011
Go to my shop
Senior Member
This is my current project. Its a bandit skull ring. Im currently working on redoing the detail on the bandana. Sharper more defined bandana detail. Its far from being complete though. What you guys think?



  • Attachment: BSR.jpg
    (Size: 31.34KB, Downloaded 240 time(s))

[Updated on: Sun, 03 June 2012 03:59 UTC]


----------------------------------------------------------------------------------------------------------------

- Sal G -
My Website
www.sgcustomsilver.com
Facebook Page
www.facebook.com/SGCustomSilver
Re: Bandit Skull Ring [message #47990 is a reply to message #47948 ] Mon, 07 May 2012 12:56 UTC Go to previous messageGo to next message
avatar Youknowwho4eva  is currently offline Youknowwho4eva
Messages: 5302
Registered: September 2008
Go to my shop
Senior Member
I work here
I prefer the hot pepper bandanas myself Laughing What software are you using again?

IMO the center of the brow looks more inquisitive than intense, at least from that angle.


Your friendly neighborhood Moderman
michael@shapeways.com
Re: Bandit Skull Ring [message #48067 is a reply to message #47990 ] Tue, 08 May 2012 19:07 UTC Go to previous messageGo to next message
avatar SGDesigns  is currently offline SGDesigns
Messages: 358
Registered: July 2011
Go to my shop
Senior Member
Yeah, I can't decide on what bandana design I should go with. I made a search for the hot pepper bandanas, wow, not very menacing... LOL. I use 3ds max 12, Rhino 3d but I primarily use Zbrush 4. Been using it for 10 months now and its the best...! Yeah I see what you mean with the brow, kinda makes it look confused. Thanks for the feedback. Any feedback, positive or negative is good feedback in my opinion.


----------------------------------------------------------------------------------------------------------------

- Sal G -
My Website
www.sgcustomsilver.com
Facebook Page
www.facebook.com/SGCustomSilver
Re: Bandit Skull Ring [message #48799 is a reply to message #48067 ] Wed, 23 May 2012 10:35 UTC Go to previous messageGo to next message
avatar SGDesigns  is currently offline SGDesigns
Messages: 358
Registered: July 2011
Go to my shop
Senior Member
Making progress on this ring. Changed the eyes but will most likely change them again. LOL...


  • Attachment: BSR1.jpg
    (Size: 95.57KB, Downloaded 198 time(s))

[Updated on: Sun, 03 June 2012 04:00 UTC]


----------------------------------------------------------------------------------------------------------------

- Sal G -
My Website
www.sgcustomsilver.com
Facebook Page
www.facebook.com/SGCustomSilver
Re: Bandit Skull Ring [message #49059 is a reply to message #47948 ] Tue, 29 May 2012 12:03 UTC Go to previous messageGo to next message
avatar SGDesigns  is currently offline SGDesigns
Messages: 358
Registered: July 2011
Go to my shop
Senior Member
Decided to change it up a bit. Made changes to the eyes and added a hint of whats behind the bandana . . .





  • Attachment: BSR 2.jpg
    (Size: 48.28KB, Downloaded 199 time(s))

[Updated on: Wed, 12 December 2012 19:23 UTC]


----------------------------------------------------------------------------------------------------------------

- Sal G -
My Website
www.sgcustomsilver.com
Facebook Page
www.facebook.com/SGCustomSilver
Re: Bandit Skull Ring [message #49072 is a reply to message #47948 ] Tue, 29 May 2012 14:37 UTC Go to previous messageGo to next message
avatar Youknowwho4eva  is currently offline Youknowwho4eva
Messages: 5302
Registered: September 2008
Go to my shop
Senior Member
I work here
The teeth definitely add some fierceness.


Your friendly neighborhood Moderman
michael@shapeways.com
Re: Bandit Skull Ring [message #49178 is a reply to message #49072 ] Wed, 30 May 2012 04:17 UTC Go to previous messageGo to next message
avatar SGDesigns  is currently offline SGDesigns
Messages: 358
Registered: July 2011
Go to my shop
Senior Member
Thanks, I'm definitely getting this done in standard silver so all the faint details of the teeth show up and only mirror polish the skull to give it more contrast.


----------------------------------------------------------------------------------------------------------------

- Sal G -
My Website
www.sgcustomsilver.com
Facebook Page
www.facebook.com/SGCustomSilver
Re: Bandit Skull Ring [message #58494 is a reply to message #47948 ] Wed, 12 December 2012 19:22 UTC Go to previous messageGo to next message
avatar SGDesigns  is currently offline SGDesigns
Messages: 358
Registered: July 2011
Go to my shop
Senior Member
Looks like ive made a lot of changes to this project but im finally done and very happy with the results. This is a size 10, in standard silver and weighs exactly 2 ounces. I hand polished the skull myself and gave the bandana a matte finish.

index.php?t=getfile&id=24239&private=0

  • Attachment: 5.JPG
    (Size: 130.15KB, Downloaded 176 time(s))


----------------------------------------------------------------------------------------------------------------

- Sal G -
My Website
www.sgcustomsilver.com
Facebook Page
www.facebook.com/SGCustomSilver
Re: Bandit Skull Ring [message #58495 is a reply to message #58494 ] Wed, 12 December 2012 19:24 UTC Go to previous message
avatar SGDesigns  is currently offline SGDesigns
Messages: 358
Registered: July 2011
Go to my shop
Senior Member
index.php?t=getfile&id=24240&private=0

  • Attachment: 3.jpg
    (Size: 77.99KB, Downloaded 167 time(s))


----------------------------------------------------------------------------------------------------------------

- Sal G -
My Website
www.sgcustomsilver.com
Facebook Page
www.facebook.com/SGCustomSilver

 
   
Previous Topic:Heart with wings pendant
Next Topic:TriStand Minimal - Minimalistic iPhone Cases with Built In Flip Out Stands

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.