I am very much a newbie at this and am unsure how to even discribe it.

I am drawing in AutoCAD 2002. The parts I am drawing will eventually be patterns for sand casting Live Steam Locomotive parts using brass and cast iron.

When I export the parts to an STL file format the curved faces have large triangular facets in the curves.

For one will these facets show up in the actual RP part and if so can anyone give me advice on reseting my AutoCAD to a higer density on the export to STL

• Attachment: 445868_v0_s14_convert_large.jpg
  (Size: 33.18KB, Downloaded 253 time(s))

I don't know AutoCAD, but I do know the materials Shapeways offers.

As a general rule of thumb, aim for faces on curves that are half the minimum detail size. i.e. A 2mm diameter cylinder printed in WSF, 60 edges around the circumference and 1 edge for the height ( = 120 triangular faces for the cylinder walls) this works out to be just over 0.1mm edges on the curved areas. (with FUD, aim for 0.05mm)

The limit for (regular) upload is 1 million triangles, surfaces constrained to the regular axis of a model should be ok at whatever size triangle, however surfaces that transistion from one axis to another or are on a diagonal need to be pretty detailed to avoid 'printer stepping'... so the more triangles you can get into your model the more accurate the final print will be to your model.

Paul

[edit] sorry, I forgot my manners. Welcome to Shapeways!

A handy tip when modelling, turn off all smoothing - smoothing is a visual thing for us human-beans, printers cannot see

[Updated on: Sun, 22 January 2012 16:40 UTC]

It would appear I will have to live with the facets.

The parts I am designing are to be used as patterns for doing sand castings to make brass and cast iron parts on a 1.6 inch to the foot model locomotive.

This is an example of a part that is around 8 inches long that was cast in sand haveing used WSF as a pattern




Changing the part size is not an option

Thanks for all the help so far. Quite a neat website.

• Attachment: 1211112037a[1].jpg
  (Size: 95.76KB, Downloaded 186 time(s))

AutoCAD

Type these commands in AutoCAD's command line:

1. Set DISPSILH to 1

2. Set ISOLINES to 0

3. Set FACETRES to 10

4. Relocate the object to the positive X-Y-Z octant

5. REGEN

Export your STL again to overwrite your first file.
I would recommend opening your stl file in Nettfabb to check, repair or scale.

http://www.netfabb.com/basic.php

http://solidwild.posterous.com/cad-guide-to-stl-export-for-3 d-printing

• Attachment: facetres.png
  (Size: 35.67KB, Downloaded 138 time(s))

[Updated on: Mon, 23 January 2012 18:13 UTC]

Thanks for the everything. Especially dumbing it down to my level of expertice.

After changing the settings

• Attachment: 449845_v0_s14_convert_large.jpg
  (Size: 33.35KB, Downloaded 110 time(s))