Home » Community » 3D modelers for hire » Jewellery 3D modeller available to design the jewellery of your dreams
Search Search  
Show: Today's Messages    Show Polls    Message Navigator
Jewellery 3D modeller available to design the jewellery of your dreams [message #73164] Fri, 16 August 2013 11:21 UTC Go to next message
avatar Lifestyle_Designs_Jewellery  is currently offline Lifestyle_Designs_Jewellery
Messages: 4
Registered: August 2013
Go to my shop
Junior Member
Hi my name is Rhys Frampton and I am a Master Jeweller living in Brisbane Australia who specializes in boutique one off Custom Design Jewellery using 3D CAD software specifically designed for the Jewellery industry (Matrix 7.5).

I have over 28 years experience designing and making custom jewellery. I am passionate about assisting you to create the perfect piece of jewellery for your very special occasions. I regularly assist local, interstate and international clients. To check out some examples of my work see my webpage www.lifestyle-designs.net.au or my facebook page.

If your interested in my work I am happy to give you quotes for your designs, and can also offer a finishing service where I can the the jewellery cast in your choice of metal and supply and set any required stones such as diamonds and precious gemstones .

  • Attachment: IMG_2971.jpeg
    (Size: 205.71KB, Downloaded 116 time(s))

Re: Jewellery 3D modeller available to design the jewellery of your dreams [message #74615 is a reply to message #73164 ] Wed, 11 September 2013 23:40 UTC Go to previous messageGo to next message
avatar Fabcreations3d  is currently offline Fabcreations3d
Messages: 12
Registered: June 2013
Go to all my models
Junior Member
Hello,

Am I able to provide drawings to you, and have you create the 3D model from the simple drawing?
If so I would like to send you a few items. I am eagerly awaiting your response.

Best Regards,

Nicole
Re: Jewellery 3D modeller available to design the jewellery of your dreams [message #74787 is a reply to message #74615 ] Sat, 14 September 2013 09:28 UTC Go to previous messageGo to next message
avatar Lifestyle_Designs_Jewellery  is currently offline Lifestyle_Designs_Jewellery
Messages: 4
Registered: August 2013
Go to my shop
Junior Member
Hi Nicole,

Yes I am able to create a 3d model from a simple sketch. If you can send me through the image I will be able to provide you with a quote. Were you after just a file or the finished product? I am a fully qualified master jewellery so can also provide the finished product including supply and set any stones. If so I will have a few more questions for you.

If it is a ring that we are talking about. I will need to know your fingersize before i can start the draw.

You are most welcome to have a look on my webpage at some of my finished products.

Regards

Rhys Frampton
Re: Jewellery 3D modeller available to design the jewellery of your dreams [message #74819 is a reply to message #73164 ] Sat, 14 September 2013 21:32 UTC Go to previous messageGo to next message
avatar Fabcreations3d  is currently offline Fabcreations3d
Messages: 12
Registered: June 2013
Go to all my models
Junior Member
Hello,
Thank you for your response. Attached is a logo that I would like to have made into 1 1/4" charm to be worn on a necklace. Please provide a price quote as well as any suggestions on improving the piece. What is essential to this piece is that it as closely as possible resembles the actual logo. Also what is your turn around time, and maximum load per week? This is a tester piece, and may possibly lead to a larger contract, so I am curious to know the type of load you are capable of handling. I await your response.

Best Regards,

Nico

Re: Jewellery 3D modeller available to design the jewellery of your dreams [message #74823 is a reply to message #74819 ] Sun, 15 September 2013 00:06 UTC Go to previous messageGo to next message
avatar Lifestyle_Designs_Jewellery  is currently offline Lifestyle_Designs_Jewellery
Messages: 4
Registered: August 2013
Go to my shop
Junior Member
HI Nico,

Due to the design of the logo. We would need to have a solid background with the perhaps the Logo letters etc raised or cut out.

In regards to your question on load quantities and turn around time. Are you referring to how many of this same item i could draw, or draw and produce in precious metal, (Gold or Silver etc)?

Once drawn. The drawing is used to produce multiples if required.

Quote to draw this logo as a 3DM file. AUD$66 including tax.
Draw time turn around 48 hours
Production in Precious metals turn around time. approx 12 business days. (slightly longer during peak times, Christmas etc)

To quote to produce the drawing into a finished item. I will need to know what metal, (Silver, 9ct, 14ct or 18ct Gold and in what colour gold).
If you are wanting it produced in other materials. Perhaps have a look at what Shapeways have to offer for the production side.

I hope this answers your questions. If there is anything else or you are ready for me to go ahead with the draw please let me know.

Kind Regards
Rhys Frampton
Re: Jewellery 3D modeller available to design the jewellery of your dreams [message #74835 is a reply to message #74823 ] Sun, 15 September 2013 17:03 UTC Go to previous messageGo to next message
avatar Fabcreations3d  is currently offline Fabcreations3d
Messages: 12
Registered: June 2013
Go to all my models
Junior Member
I appreciate the response, however the rate for design is higher than I hoped for. Is it negotiable by any means, as it doesn't leave much room for 3D printing cost, and consumer mark up? I am only in need of the design and printable file. While I respect your time and craft, $66 is a bit steep for the designing of the pendant. Please let me know if this is negotiable so that we may move forward.

Also, the sketches and designs that I send in the future will vary as this is all about the idea of custom 3D printed jewelry. I anticipate sending you between 10-15 small designs per month, based on how smoothly this initial design process goes.

Best Regards,

Nicole
Re: Jewellery 3D modeller available to design the jewellery of your dreams [message #74846 is a reply to message #74835 ] Mon, 16 September 2013 00:51 UTC Go to previous messageGo to next message
avatar Lifestyle_Designs_Jewellery  is currently offline Lifestyle_Designs_Jewellery
Messages: 4
Registered: August 2013
Go to my shop
Junior Member
Nicole,

I was just wondering which part of the world you are in? Might assist me with quoting.

My usual rate for this service is $132/hr retail. That is why i quoted you trade price of $66 inc tax.So that you can still onsell to make a profit.

Unfortunately, i cannot do it any cheaper. My costs involved in being about to provide service are not low. The Hardware ($3000), software ($8500) and training ($1650) costs have to make profit to pay for itself. I work in Australia, and after deducting from the $66 the $6 Government Goods and services tax, then deduct another $16.50 for Government income tax. Only leaves me with $43.50 per hour. from this i have tom make payments on my costs.

With my local competitors are billing their time between $90-$120/hr wholesale price. I need to bill at least what i have quoted you.

Let me know if we can still do business.

Kind Regards

Rhys Frampton
Re: Jewellery 3D modeller available to design the jewellery of your dreams [message #86846 is a reply to message #73164 ] Fri, 28 March 2014 05:52 UTC Go to previous messageGo to next message
avatar cora55  is currently offline cora55
Messages: 2
Registered: March 2014
Go to all my models
Junior Member
Hi there,
My name is Cora and I'm looking for someone to make a mold of a wedding band. ll I have are pictures to work with how ever. My ring size is a four and the width of the ring would be would be any where from 5/16 of an inch to 3/8 of an inch.
I will have a local jeweler cast the ring using my current wedding band. I'm looking for someone who can use technology to create an exact replica of that ring, unfortunately it was a size 7 and i was not able to find a jeweler who was comfortable with sizing it so I have to return the ring. I have not been able to find that ring again.
I'd appreciate the help!

Re: Jewellery 3D modeller available to design the jewellery of your dreams [message #87311 is a reply to message #73164 ] Fri, 04 April 2014 20:13 UTC Go to previous message
avatar varinsalon  is currently offline varinsalon
Messages: 1
Registered: April 2014
Go to all my models
Junior Member
hi!
I am looking to incorporate organic shapes into jewelry designs, more specifically, hair accessories.
Here attached is a picture of different dried plants that I would need for someone to design in 3D so that I can then incorporate them into hair accessory pieces.
Is this a project you are able to and interested in doing?
Philippe

  • Attachment: organic.jpg
    (Size: 245.78KB, Downloaded 30 time(s))


 
   
Previous Topic:Doing Simple Modeling for cheap!
Next Topic:Looking TO Model UR Stuff-Professionalism above all

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.