Home » Support » 3D Printing » PA2200 White, Strong & Flexible
Search Search  
Show: Today's Messages    Show Polls    Message Navigator
PA2200 White, Strong & Flexible [message #51292] Fri, 13 July 2012 19:58 UTC Go to next message
avatar crosbkev  is currently offline crosbkev
Messages: 2
Registered: July 2011
Go to my shop
Junior Member
Trying to locate material data sheet for PA2200.
I see eos lists 5 different types of PA2200 as follows:
Balance 1.0
Performance 1.0
Speed 1.0
Top Quality 1.0
Top Speed 1.0
Which type of PA2200 is being used as White, Strong & Flexible?
Re: PA2200 White, Strong & Flexible [message #51294 is a reply to message #51292 ] Fri, 13 July 2012 20:08 UTC Go to previous messageGo to next message
avatar BillBedford  is currently offline BillBedford
Messages: 346
Registered: November 2008
Go to my shop
Senior Member
You mean this one?
http://www.shapeways.com/topics/udesign/materials/white_stro ng_flexible/pa2200_material_data_sheet_12_08_en__.pdf


Bill Bedford
Re: PA2200 White, Strong & Flexible [message #51295 is a reply to message #51294 ] Fri, 13 July 2012 20:22 UTC Go to previous messageGo to next message
avatar crosbkev  is currently offline crosbkev
Messages: 2
Registered: July 2011
Go to my shop
Junior Member
I noticed that eos no longer lists just the PA2200 on thier material data centre, but rather have split it into the above mentioned types. Just wondering which one is now being used.
Re: PA2200 White, Strong & Flexible [message #51308 is a reply to message #51295 ] Sat, 14 July 2012 06:16 UTC Go to previous messageGo to next message
avatar VeryWetPaint  is currently offline VeryWetPaint
Messages: 40
Registered: August 2009
Go to my shop
Member
The various grades refer to the machine's settings. It's all the same material, polyamide 12 "nylon."

Shapeways uses 0.15 mm layers (ie: 150 m) which corresponds to EOS's PA 2200 Speed 1.0 grade.
Re: PA2200 White, Strong & Flexible [message #51347 is a reply to message #51308 ] Sun, 15 July 2012 00:37 UTC Go to previous messageGo to next message
avatar stannum  is currently offline stannum
Messages: 947
Registered: May 2009
Go to my shop
Senior Member
So the PDF is outdated?

Anyway, the old values seem to be around (new) Balance and Performance (layers 120-100). It could explain why old products had less layering issues.
Re: PA2200 White, Strong & Flexible [message #51478 is a reply to message #51347 ] Tue, 17 July 2012 17:29 UTC Go to previous messageGo to next message
avatar VeryWetPaint  is currently offline VeryWetPaint
Messages: 40
Registered: August 2009
Go to my shop
Member
stannum wrote on Sun, 15 July 2012 00:37

So the PDF is outdated?

Anyway, the old values seem to be around (new) Balance and Performance (layers 120-100). It could explain why old products had less layering issues.

What "old values" do you mean? Shapeways used the 0.15mm at least back to 2010, and probably longer than that.
Re: PA2200 White, Strong & Flexible [message #51504 is a reply to message #51478 ] Wed, 18 July 2012 00:23 UTC Go to previous message
avatar stannum  is currently offline stannum
Messages: 947
Registered: May 2009
Go to my shop
Senior Member
The ones in the PDF BillBedford linked.

 
   
Previous Topic:Silver printed ring questions - shrinkage, etc.
Next Topic:Question about detail features & Materials

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.