Home » Community » 3D modelers for hire » Experienced 3D modeler available for work. I can work with organic and hard surface designs.
Search Search  
Show: Today's Messages    Show Polls    Message Navigator
Experienced 3D modeler available for work. I can work with organic and hard surface designs. [message #58483] Wed, 12 December 2012 17:11 UTC Go to next message
avatar justinhowlett  is currently offline justinhowlett
Messages: 16
Registered: April 2011
Go to my shop
Junior Member
Hey, I am an experienced 3D modeler who can work with both organic and hard surface designs.
I have 10+ years of 3D software experience and 2 years 3D printing experience and can turn your ideas or plans into a 3D image to have 3D printed.

Check out my website to see what kind of projects I have worked on in the past or take a look at the comments below. Reply to this post to find out more or to get a quote.

RATE:
I quote reasonable fixed rates to keep things simple and so you know the exact cost of my service up front. Commissions over £100.GBP may require a 50% deposit and I accept all kinds of projects, small and large.

Thanks for taking a look:)

website
designer spotlight

http://www.themodelboy.com/wp-content/uploads/2014/02/chunkygirkl.jpg

http://www.themodelboy.com/wp-content/uploads/2013/06/robo2.jpg

http://www.themodelboy.com/wp-content/uploads/2013/10/sam11.jpg

http://www.themodelboy.com/wp-content/uploads/2013/10/sam-upright.jpg

http://www.themodelboy.com/wp-content/uploads/2012/12/robophoto2.jpg

http://www.themodelboy.com/wp-content/uploads/2013/10/allrings.jpg

http://www.themodelboy.com/wp-content/uploads/2013/10/draft1.jpg

http://www.themodelboy.com/wp-content/uploads/2013/06/camino400x300.png

Thanks,

Justin Howlett

[Updated on: Tue, 11 February 2014 17:14 UTC]

Re: 3D modeler available for work [message #59891 is a reply to message #58483 ] Wed, 09 January 2013 12:24 UTC Go to previous messageGo to next message
avatar Dotsan  is currently offline Dotsan
Messages: 366
Registered: August 2008
Go to my shop
Senior Member
I hired the help of a fellow Shapie Justin Howlett to create the model and he did a grand job for a reasonable rate.

http://farm9.staticflickr.com/8044/8364496926_cf3ba72d44_z.jpg
Zebra 3D print by Dot San, on Flickr

http://farm9.staticflickr.com/8072/8364496730_67d6657527_z.jpg
Zebra 3D print by Dot San, on Flickr

The Zebra head is a available here


www.dotsan.com
Re: 3D modeler available for work [message #59926 is a reply to message #58483 ] Wed, 09 January 2013 19:30 UTC Go to previous messageGo to next message
avatar jacobee  is currently offline jacobee
Messages: 2
Registered: January 2013
Go to all my models
Junior Member
Hi Justin,


I'm just starting out with 3d modeling and I'm considering making a simple (in my opinion) project. I'm an illustrator and this would be for a homegoods type thing. The idea is to create little ceramic animals that would sit atop ceramic mugs. I have a couple images here:
http://www.flickr.com/photos/jacobee/8053476200/in/photostre am
http://www.flickr.com/photos/jacobee/8053472183/in/photostre am/

I'm interested in knowing how much you would charge to model the animal-it would end up being about 2 inches tall. I would also like to know how much you would charge to model a custom cup, round, about 4 inches tall. This might end up being a series with different animals and potentially grant funded, I'm just working up the balance sheet now.

Many Thanks,
Sarah Jacoby
Re: 3D modeler available for work [message #60604 is a reply to message #58483 ] Wed, 23 January 2013 20:25 UTC Go to previous messageGo to next message
avatar ccfrazier  is currently offline ccfrazier
Messages: 1
Registered: January 2013
Go to all my models
Junior Member
Hi, I am interested in your 3D modeling service.

Can you tell me the best way to go over the idea I want to model with you? Should I send images with details?

Can you do some basic graphic work to get the design ready to be turned into a 3-D design?

I want to create a lace like pattern that is very flat, similar to some of the 3-D jewelry I have seen.

Tell me the best way to go over the project with you and how you bid/ charge for the work you do.

Thanks, C Frazier~
Re: 3D modeler available for work [message #62388 is a reply to message #58483 ] Tue, 19 February 2013 17:37 UTC Go to previous messageGo to next message
avatar Adamsaad97  is currently offline Adamsaad97
Messages: 1
Registered: January 2013
Go to all my models
Junior Member
The Model Boy is by far the best 3D modeler that I have encountered.

We hired him to create a complex 3D image for our device in order to have a prototype created and he knocked it out of the park.

He was very attentive to our needs and responded to all concerns in a timely manner.

Totally professional and I highly recommend him and his work.

If you considering a 3D modeler look no further because he is your guy.

Thanks for all your hard work on our project Model Boy and I will undoubtedly use your services when a new project arises.

Thanks again,

NNK, LLC.
Re: 3D modeler available for work [message #62690 is a reply to message #58483 ] Sun, 24 February 2013 01:13 UTC Go to previous messageGo to next message
avatar Smugsly1  is currently offline Smugsly1
Messages: 7
Registered: February 2013
Go to all my models
Junior Member
Hi,

May I call or email you regarding a design project?

I'm seeking a designer who can work on site in Manhattan for the first project, them remote for other projects.

Projects include:

- novel water bottle concept

- cobra belt buckle

- glasses

- skull mask

Please reply to smugsly1@gmail.com

Thanks,

Evan
Re: 3D modeler available for work [message #65219 is a reply to message #58483 ] Sun, 31 March 2013 02:40 UTC Go to previous messageGo to next message
avatar ionamon  is currently offline ionamon
Messages: 1
Registered: July 2011
Go to my shop
Junior Member
I can`t thank Justin enough!
Justin was the third person I contacted about my personal project but, the only one who took it seriously. His communication was very prompt and professional. He totally made my dream a reality and his rates are more than reasonable. In the future I will refer my friends to him and if I need any further work I know who to ask.
Re: Experienced 3D modelmaker available for work who works with organic and hard surface designs. [message #66401 is a reply to message #58483 ] Fri, 19 April 2013 03:27 UTC Go to previous messageGo to next message
avatar batbrick  is currently offline batbrick
Messages: 2
Registered: January 2013
Go to all my models
Junior Member
Your work is stellar! Are you experienced in Autodesk inventor? Or anything where you make solids and not meshes? Like Solidsworks? Also, are you any good with converting meshes to solids?

I have many models that need converting and possibly someone to create things for me. They are rather small objects though.

You can email me at batbrickco@gmail.com
Extremely happy [message #67606 is a reply to message #58483 ] Wed, 08 May 2013 00:50 UTC Go to previous messageGo to next message
avatar DrBeakerMD  is currently offline DrBeakerMD
Messages: 1
Registered: May 2013
Go to all my models
Junior Member
I was looking at 3D modelling and printing for a
Special present for my girlfriend, and with no idea about any of it
I emailed Themodelboy for some help.

He was extremely accommodating, making sure I knew what was going on, what was involved
And why he made certain decisions etc. I felt completely safe with it in his hands
And when the first draft came in I was ecstatic.
He worked fast, reliably and efficiently. Even promising not to put the project up on his website until her birthday
Comes around!

I would, and will, recommend Themodelboy to any and all who are thinking
About 3D printing or modelling. I couldn't be happier.
Re: Experienced 3D modelmaker available for work who works with organic and hard surface designs. [message #70319 is a reply to message #58483 ] Sat, 22 June 2013 16:41 UTC Go to previous messageGo to next message
avatar jakeh  is currently offline jakeh
Messages: 2
Registered: June 2013
Go to all my models
Junior Member
Hi great stuff, could I get a quote for a 1/24th scale model car. I need working doors and working steering if possible? I can send images if you PM me.

Cheers

Jake
icon14.gif  Re: Experienced 3D modeler available for work. Can with organic and hard surface designs. [message #72108 is a reply to message #58483 ] Wed, 24 July 2013 16:13 UTC Go to previous messageGo to next message
avatar Sasachaz  is currently offline Sasachaz
Messages: 6
Registered: October 2008
Go to all my models
Junior Member
I hired Justin for work on my board game "Xia: Legends of a Drift System".

He's been incredible! I highly recommend him!

Justin was able to help me revise some models I previously had, adding flight stand holes to miniature starships. He also helped me design a custom flight stand for the miniature starships. The results were perfect!

http://faroffgames.com/images/Flight_Proto%20(7).JPG

He also designed a 30 x 30 x 2mm custom coin for the game. This coin had very specific mechanics as well as asthectis. He was able to figure out how to get the coins to stack like poker chips, as well as making the coins very beautiful:

http://faroffgames.com/images/CreditFinal.png

Everyone has been very impressed with his work.

I found Justin refreshing to work with. He provided reasonable flat-rate costs, was very responsive, and handled feedback professionally.

I will definitely be using his services in the future!

Cheers, -Cody
Re: Experienced 3D modeler available for work. I can work with organic and hard surface designs. [message #76323 is a reply to message #58483 ] Mon, 07 October 2013 20:45 UTC Go to previous messageGo to next message
avatar makingmovements  is currently offline makingmovements
Messages: 2
Registered: July 2010
Go to all my models
Junior Member
I hired Justin to make several 1/6 scale objects for a project I'm working on. He went above and beyond my expectations and has produced some brilliant 3d models for me. I would highly recommend him for his professional attitude and amazing attention to detail. I look forward to working with him again in the future.

Jamie
Re: Experienced 3D modeler available for work. I can work with organic and hard surface designs. [message #76466 is a reply to message #58483 ] Thu, 10 October 2013 01:03 UTC Go to previous messageGo to next message
avatar xliu019  is currently offline xliu019
Messages: 6
Registered: September 2013
Go to all my models
Junior Member
Hi, dear designer,
We urgently need you to help us look at our current designs, and help us break them into smaller pieces for printing and assemble. Rate negotiable. Best if we can finish today. Please reply asap. My email is liu.xiaoyu@dhs.sg. l'm in Singapore, my number is 0065-85884686. Thanks

best wishes
xiaoyu
Re: Experienced 3D modeler available for work. I can work with organic and hard surface designs. [message #77614 is a reply to message #58483 ] Sun, 27 October 2013 07:45 UTC Go to previous messageGo to next message
avatar TNTom  is currently offline TNTom
Messages: 5
Registered: September 2013
Go to all my models
Junior Member
Justin is a class act. He will help you with your designs, make suggestions on how to make the process more streamlined, and is quite a bargain considering his talents. I hired Justin for several pieces and I am more than satisfied with his work, his help, his talent, and the end product.

I highly recommend giving Justin a try. you won't be disappointed.

Thomas Hicks
Re: Experienced 3D modeler available for work. I can work with organic and hard surface designs. [message #78185 is a reply to message #58483 ] Mon, 04 November 2013 21:24 UTC Go to previous messageGo to next message
avatar justinhowlett  is currently offline justinhowlett
Messages: 16
Registered: April 2011
Go to my shop
Junior Member
Post from morey:

I contacted Justin about a complex range of 3D Models in 1:35 Scale.
(Project is still running and hopefully will be for a long time.)

He got back to me very quickly and we got the idea up and running very fast.

Excellent turn around and totally professional in all of my needs. and he is more than willing to go that extra mile!!!
I highly recommend him and his work,

Project is still running and hopefully will be for a long time.

Thanks again, and keep up the good work!!

NYD
Re: Experienced 3D modeler available for work. I can work with organic and hard surface designs. [message #85017 is a reply to message #58483 ] Mon, 17 February 2014 22:41 UTC Go to previous messageGo to next message
avatar makingmovements  is currently offline makingmovements
Messages: 2
Registered: July 2010
Go to all my models
Junior Member
Justin just finished a job for me creating an exact replica of a real world 1/6 scale action figure's body. He did an excellent job and worked hard getting the smallest details perfect! You can check out the model here - it was made in separate parts so I could then rig it in cinema 4d.

I will definitely continue to use Justin on future jobs as he always delivers awesome results!

thanks

Jamie
Re: Experienced 3D modeler available for work. I can work with organic and hard surface designs. [message #85786 is a reply to message #85017 ] Tue, 04 March 2014 13:11 UTC Go to previous messageGo to next message
avatar justinhowlett  is currently offline justinhowlett
Messages: 16
Registered: April 2011
Go to my shop
Junior Member
Check out this bead I recently made for Natasha.

index.php?t=getfile&id=53573&private=0

The bead is being printed now so photos of the print will follow shortly.

  • Attachment: draft_2.jpg
    (Size: 259.66KB, Downloaded 280 time(s))

Re: Experienced 3D modeler available for work. I can work with organic and hard surface designs. [message #85960 is a reply to message #85786 ] Fri, 07 March 2014 23:23 UTC Go to previous messageGo to next message
avatar evilzombietoast  is currently offline evilzombietoast
Messages: 1
Registered: January 2014
Go to my shop
Junior Member
I honestly cannot say enough wonderful things about Justin's work.

Justin was incredibly helpful and dose absolutely marvilous work.

He's so fast, from sending the files and doing a single edit (which was my fault) I had files in hand in just a few short days. For being on the other side of the planet I am beyond impressed on the speed of returned emails and the professional but still personable communication.

And all for an incredibly reasonable price.


index.php?t=getfile&id=53856&private=0


It's 38 mm from point to tip. I'm so absolutely blown away with how awesome this turned out!

When I'm in need of more modelling to be done I will defiantly contact Justin again.

-Natasha

  • Attachment: image.jpg
    (Size: 1.09MB, Downloaded 243 time(s))

Re: Experienced 3D modeler available for work. I can work with organic and hard surface designs. [message #87432 is a reply to message #58483 ] Mon, 07 April 2014 13:35 UTC Go to previous messageGo to next message
avatar justinhowlett  is currently offline justinhowlett
Messages: 16
Registered: April 2011
Go to my shop
Junior Member
Here are screenshots of a job in progress for DC ware. The project can be found at the link below:

http://journeytotheoverland.com/

index.php?t=getfile&id=56480&private=0
index.php?t=getfile&id=56481&private=0
index.php?t=getfile&id=56482&private=0

Re: 3D modeler available for work [message #87453 is a reply to message #59891 ] Mon, 07 April 2014 18:48 UTC Go to previous message
avatar WhiteBotany  is currently offline WhiteBotany
Messages: 2
Registered: April 2014
Go to all my models
Junior Member
Hello,
I would like to design a small gnome (2 inches tall). I have a picture of a ceramic version of it, but I need to add 2 little cute eyes on top.
The roses instead of a beard have to be very detailed so its noticeable when printed small in plastic.
Would this be something you can do? If so can you provide a quote?
I need one of these 3 formats: OBJ, STP, STL.
I have attached an image.
Thank you!

Adriana


 
   
Previous Topic:Modeler for Hire
Next Topic:New to Shapeways; Recent graduate looking for work! Proficient in 3DS Max and ZBrush.

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.