Home » Community » 3D modeler needed » Food Packaging [3D modeling for plastic]
Search Search  
Show: Today's Messages    Show Polls    Message Navigator
Food Packaging [3D modeling for plastic] [message #45251] Sat, 10 March 2012 16:48 UTC Go to next message
avatar MetalTear  is currently offline MetalTear
Messages: 5
Registered: March 2012
Go to all my models
Junior Member
Please find attached some unprofessionally-conceived sketches.

We are selling Stuffed Vine Leaves, they come in sizes and different stuffing.

We are interested in someone who could 3D model the sketches in the attachment. Of course, we can further enhance the drawings and include more specifics, but for now here are the criteria:

1) The Package fits in a palm size.
2) It houses 3 compartments (2 lower and 1 upper)
3) Nothing of the plastic is thrown away (it is also meant to be a drive-thru snack (plastic can snap to places)
4) You can get creative!

We would like the design to exceed the sketches. Something radical and contemporary is advisable. Preferably.

Please let us know if this sparks your interest! And quote us. for a simple 3D modeling as to print it with ShapeWays before we print in plastic in large quantities.

  • Attachment: Sketches.pdf
    (Size: 1.03MB, Downloaded 142 time(s))

Re: Food Packaging [3D modeling for plastic] [message #45265 is a reply to message #45251 ] Sat, 10 March 2012 19:39 UTC Go to previous messageGo to next message
avatar JACANT  is currently offline JACANT
Messages: 587
Registered: July 2011
Go to my shop
Senior Member
Could not open PDF

[Updated on: Sat, 10 March 2012 22:27 UTC]


jacantdesign@gmail.com
Re: Food Packaging [3D modeling for plastic] [message #45266 is a reply to message #45265 ] Sat, 10 March 2012 19:42 UTC Go to previous messageGo to next message
avatar MetalTear  is currently offline MetalTear
Messages: 5
Registered: March 2012
Go to all my models
Junior Member
JACANT wrote on Sat, 10 March 2012 19:39

Could not open PDF
index.php?t=getfile&id=15256&private=0


Hi, i just opened it from an iphone. It opened just fine Smile
Re: Food Packaging [3D modeling for plastic] [message #45267 is a reply to message #45266 ] Sat, 10 March 2012 19:50 UTC Go to previous messageGo to next message
avatar JACANT  is currently offline JACANT
Messages: 587
Registered: July 2011
Go to my shop
Senior Member
I tried again this time downloading the pdf.
It has zero file size.

  • Attachment: Capture.JPG
    (Size: 45.80KB, Downloaded 72 time(s))

[Updated on: Sat, 10 March 2012 22:28 UTC]


jacantdesign@gmail.com
Re: Food Packaging [3D modeling for plastic] [message #45278 is a reply to message #45267 ] Sat, 10 March 2012 22:34 UTC Go to previous messageGo to next message
avatar JACANT  is currently offline JACANT
Messages: 587
Registered: July 2011
Go to my shop
Senior Member
Something strange going on here!
The PDF downloads now, but my original messages with captures are not showing, they have zero file size!
Anyway I will have a look at your file.


jacantdesign@gmail.com
Re: Food Packaging [3D modeling for plastic] [message #45291 is a reply to message #45278 ] Sun, 11 March 2012 01:53 UTC Go to previous messageGo to next message
avatar JACANT  is currently offline JACANT
Messages: 587
Registered: July 2011
Go to my shop
Senior Member
What do you think of it so far?

index.php?t=getfile&id=15262&private=0


jacantdesign@gmail.com
Re: Food Packaging [3D modeling for plastic] [message #45293 is a reply to message #45291 ] Sun, 11 March 2012 03:04 UTC Go to previous messageGo to next message
avatar stonysmith  is currently offline stonysmith
Messages: 1921
Registered: August 2008
Go to my shop
Shapie Expert
moderator
If the items to be placed in the outer ring have any significant weight to them, the bowl is going to topple over if you load the stuff on one side only.


Patience, Persistance, Politeness - the 3Ps will help us get us to Perfect Printed Products
Re: Food Packaging [3D modeling for plastic] [message #45297 is a reply to message #45291 ] Sun, 11 March 2012 05:24 UTC Go to previous messageGo to next message
avatar MetalTear  is currently offline MetalTear
Messages: 5
Registered: March 2012
Go to all my models
Junior Member
Ok great. Its far from complete but it seems that you are capable of handling a 3D software.

Would u like the job?
Re: Food Packaging [3D modeling for plastic] [message #45306 is a reply to message #45297 ] Sun, 11 March 2012 11:48 UTC Go to previous messageGo to next message
avatar JACANT  is currently offline JACANT
Messages: 587
Registered: July 2011
Go to my shop
Senior Member
Stonysmith is right, it would be top heavy, but this is just a quick mockup of what I am capable of.
PM sent.


jacantdesign@gmail.com
Re: Food Packaging [3D modeling for plastic] [message #45344 is a reply to message #45306 ] Mon, 12 March 2012 00:03 UTC Go to previous messageGo to next message
avatar JACANT  is currently offline JACANT
Messages: 587
Registered: July 2011
Go to my shop
Senior Member
Another idea. More stable.
http://www.shapeways.com/model/501375/dish.html
index.php?t=getfile&id=15269&private=0

[Updated on: Mon, 12 March 2012 00:26 UTC]


jacantdesign@gmail.com
Re: Food Packaging [3D modeling for plastic] [message #45346 is a reply to message #45344 ] Mon, 12 March 2012 05:03 UTC Go to previous messageGo to next message
avatar MetalTear  is currently offline MetalTear
Messages: 5
Registered: March 2012
Go to all my models
Junior Member
Hey Jacant,
I've sent you a PM.
Re: Food Packaging [3D modeling for plastic] [message #45358 is a reply to message #45251 ] Mon, 12 March 2012 15:39 UTC Go to previous messageGo to next message
avatar Max0007  is currently offline Max0007
Messages: 5
Registered: January 2012
Go to my shop
Junior Member
Hi,

I was also playing around with the idea a little bit and this is what came out so far Smile

Cover is still missing and a lip to attach the cover is needed.
But maybe the right direction?

If you are usinge the firefox or chrome you can get a better impression here:
http://www.3xworks.de/food_package01.html

And a render picture:

http://www.3xworks.de/renderimages/FP_01.jpg

Greets
Markus
Re: Food Packaging [3D modeling for plastic] [message #45395 is a reply to message #45358 ] Tue, 13 March 2012 06:19 UTC Go to previous message
avatar MetalTear  is currently offline MetalTear
Messages: 5
Registered: March 2012
Go to all my models
Junior Member
Hi,
Thank you for your valuable effort, it looks gigantic here which sort of throws me off a bit, but the slanting design is nice indeed. However, it doesn't seem to fit a dip sauce in the middle.

We are looking more into something that accommodates 6-8 stuffed vines max in one package, the slimmer, smaller, the better!

JACANT is working on something!

 
   
Previous Topic:Virtuoso needed to work the Easy Creator
Next Topic:Cartoonist Looking for Character Modeler

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.