Home »  » Official Announcements » Dec. Edition of SW Live Wednesday at 2pm EST
Search Search  
Show: Today's Messages    Show Polls    Message Navigator
Dec. Edition of SW Live Wednesday at 2pm EST [message #40504] Mon, 19 December 2011 23:13 UTC Go to next message
avatar ana  is currently offline ana
Messages: 765
Registered: October 2008
Go to my shop
Senior Member
I work here
Hey all,

This Wednesday at 2pm EST is our Dec. session of Shapeways Live.

For any topics you'd like me to discuss, please leave your suggestions below.

Hope to see you there!

Ana



Community Manager | Shapeways

Re: Dec. Edition of SW Live Wednesday at 2pm EST [message #40516 is a reply to message #40504 ] Tue, 20 December 2011 01:05 UTC Go to previous messageGo to next message
avatar GWMT  is currently offline GWMT
Messages: 196
Registered: February 2011
Go to my shop
Senior Member
Hi Ana;
Any suggestions on how to flatten warped FD?:

http://www.shapeways.com/forum/index.php?t=msg&goto=4051 5&#msg_40515

It might be a good idea to go back to peanuts for packing instead of the new bubble wrap; most of the damage was caused by the rigidity of new packing material.
Re: Dec. Edition of SW Live Wednesday at 2pm EST [message #40520 is a reply to message #40516 ] Tue, 20 December 2011 04:13 UTC Go to previous messageGo to next message
avatar GWMT  is currently offline GWMT
Messages: 196
Registered: February 2011
Go to my shop
Senior Member
I fixed it - a little heat and pressure goes a LONG way with FD:

http://www.shapeways.com/forum/index.php?t=msg&goto=4051 5&#msg_40515
Re: Dec. Edition of SW Live Wednesday at 2pm EST [message #40586 is a reply to message #40504 ] Wed, 21 December 2011 17:15 UTC Go to previous messageGo to next message
avatar stonysmith  is currently offline stonysmith
Messages: 1874
Registered: August 2008
Go to my shop
Senior Member
moderator
Ana, with the "Community" page missing in action, I'd like to point out that there is nothing on the front page to advertize the Live! session.

If I hadn't wandered thru the forum last night, I wouldn't even know that you were doing a chat today.

Perhaps you could send out your "We're going to begin..." email a bit early? It'd be really nice to get such a reminder a full day before the video chat so that we'd have some time to plan it between eggnog and power shopping for gifts.


Patience, Persistance, Politeness - the 3Ps will help us get us to Perfect Printed Products
Re: Dec. Edition of SW Live Wednesday at 2pm EST [message #40587 is a reply to message #40586 ] Wed, 21 December 2011 17:25 UTC Go to previous messageGo to next message
avatar ana  is currently offline ana
Messages: 765
Registered: October 2008
Go to my shop
Senior Member
I work here
Stony, noted!

I'll be sure to send out the notification email earlier than usual. While it's not a full day's notice, hopefully it's still an improvement. I'm also exploring how to fix this problem with the product team permanently.

Thanks Wink


Community Manager | Shapeways

Re: Dec. Edition of SW Live Wednesday at 2pm EST [message #40595 is a reply to message #40587 ] Wed, 21 December 2011 21:26 UTC Go to previous messageGo to next message
avatar stonysmith  is currently offline stonysmith
Messages: 1874
Registered: August 2008
Go to my shop
Senior Member
moderator
Fill them full of Egg Nog!


Patience, Persistance, Politeness - the 3Ps will help us get us to Perfect Printed Products
Re: Dec. Edition of SW Live Wednesday at 2pm EST [message #40601 is a reply to message #40595 ] Wed, 21 December 2011 21:54 UTC Go to previous messageGo to next message
avatar Magic  is currently offline Magic
Messages: 1163
Registered: August 2008
Go to my shop
Senior Member
Oops... I missed this one...


So many things to design, so little time...
Re: Dec. Edition of SW Live Wednesday at 2pm EST [message #40609 is a reply to message #40601 ] Wed, 21 December 2011 23:14 UTC Go to previous messageGo to next message
avatar stop4stuff  is currently offline stop4stuff
Messages: 3109
Registered: June 2010
Go to my shop
Senior Member
i missed it too.

was it vid this time or chat again?
Re: Dec. Edition of SW Live Wednesday at 2pm EST [message #40613 is a reply to message #40609 ] Wed, 21 December 2011 23:53 UTC Go to previous messageGo to next message
avatar denali3ddesign  is currently offline denali3ddesign
Messages: 514
Registered: February 2011
Go to my shop
Senior Member
Video, you can see it(and the others as well) here: http://www.ustream.tv/recorded/19302996


Trouble using SketchUp? Get my book "3D Printing with SketchUp" - http://bit.ly/1jQ4RtV
Re: Dec. Edition of SW Live Wednesday at 2pm EST [message #40614 is a reply to message #40613 ] Thu, 22 December 2011 00:00 UTC Go to previous messageGo to next message
avatar stop4stuff  is currently offline stop4stuff
Messages: 3109
Registered: June 2010
Go to my shop
Senior Member
Thanks Smile
Re: Dec. Edition of SW Live Wednesday at 2pm EST [message #40615 is a reply to message #40614 ] Thu, 22 December 2011 00:05 UTC Go to previous messageGo to next message
avatar ana  is currently offline ana
Messages: 765
Registered: October 2008
Go to my shop
Senior Member
I work here
I also just added it to the Shapeways Live archive on our website. Wink


Community Manager | Shapeways

Re: Dec. Edition of SW Live Wednesday at 2pm EST [message #40732 is a reply to message #40504 ] Sun, 25 December 2011 21:28 UTC Go to previous message
avatar ancientbuzzard  is currently offline ancientbuzzard
Messages: 33
Registered: February 2010
Go to all my models
Member
Ana

Thanks for posting the video. Unfortunately I missed the live session as I was away from technology being fed a large pre-Christmas meal. Was a close run decision, but hunger won! Hope you all have/had a great holidays,

Andrew

[Updated on: Sun, 25 December 2011 21:29 UTC]


 
   
Previous Topic:Model Descriptions No Longer Truncated
Next Topic:UserVoice: new feature: file attachments

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.