Home » Community » Post Production Techniques » Turning the steel black
Search Search  
Show: Today's Messages    Show Polls    Message Navigator
Turning the steel black [message #15197] Sun, 25 July 2010 09:58 UTC Go to next message
avatar LincolnK  is currently offline LincolnK
Messages: 359
Registered: July 2010
Go to my shop
Senior Member
I found this site that sells a liquid that turns steel black.

I have not tried it, and don't know for sure how it would act on the alloy from SW, but it has interesting possibilities.

http://www.shorinternational.com/OxidizerColorant.php

Re: Turning the steel black [message #15208 is a reply to message #15197 ] Sun, 25 July 2010 20:44 UTC Go to previous messageGo to next message
avatar GlenG  is currently offline GlenG
Messages: 474
Registered: April 2009
Go to all my models
Senior Member
Before you order any of these chemical patinas for use on the SW SS media it is important to understand a few things. First, this print media is a composite mixture of stainless steel and bronze, being about 60% ss and 40% bronze. Chemicals designed to color plain carbon steel will have no effect on this material. This would include solutions referred to as "gun bluing". There are some formulas designed to work specifically on stainless steel but results on the print media were not very good.

The chemicals that work best are actually the ones intended for coloring copper alloys. These are available from many sources all will produce similar results with colors ranging from shades of brown to deep blue black. The best product we have found for producing a true black color on the print media comes from the Birchwood Casey Co. I believe the product is known as A-24. You can check their website to confirm this.

The other thing folks should realize it these chemicals are rather expensive and in the US extra hazardous shipping charges will be tagged onto the mail order ($20.-$25. extra) per shipment!

You might be able to find a Birchwood Casey "Brown finish for Brass" in a shop that sells firearms and save the shipping costs. This produces a very dark brown color, almost black.

The other thing to try is to experiment with heating techniques mentioned in another one of my posts. This is FREE, no chemical hazards and with practice works VERY WELL.

-G


"Where the spirit does not work with the hand, there is no art."
Leonardo da Vinci
Re: Turning the steel black [message #15305 is a reply to message #15208 ] Mon, 26 July 2010 23:16 UTC Go to previous message
avatar gumball  is currently offline gumball
Messages: 149
Registered: June 2010
Go to my shop
Senior Member
I tried a test on one my my SS die with a product called Blacken-It. It did darken some of the low areas, but was very uneven. It also left bits of the die in the bottom. I tried taking a picture of the die, but if I used the flash, it washed it out. No flash and everthing was too dark. PHOTO FAIL!

However here is one of the leftover materials.

index.php?t=getfile&id=4318&private=0

  • Attachment: leftovers.jpg
    (Size: 47.47KB, Downloaded 367 time(s))


 
   
Previous Topic:Removing Printing Powder from WSF
Next Topic:SWF shiny finish and painting

Logo

Hello.

We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.