by
sbruins
"I see you..."
Available in US ring sizes 8-13
See http://en.wikipedia.org/wiki/Ring_size for ring size reference.
Default Ring size is 9-3/4
Images shown after light polishing.
Available in US ring sizes 8-13
See http://en.wikipedia.org/wiki/Ring_size for ring size reference.
Default Ring size is 9-3/4
Images shown after light polishing.
by
Ammnra
Ring based on Portal 2 Wheatley
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
Ammnra
Ring Based on Ezio Vambrace and Hidden Blade from Assassin's Creed.
Vambrace rotates to reveal hidden blade design on band.
US Sizes 6-12 (in Half Sizes)
US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be painted. The parts will be one solid color.
Painting Guide
Choose US Ring Size:
Size 6 (This Listing)
Size 6.5
Size 7
Size 7.5
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 10.5
Size 11
Size 11.5
Size 12
Vambrace rotates to reveal hidden blade design on band.
US Sizes 6-12 (in Half Sizes)
US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be painted. The parts will be one solid color.
Painting Guide
Choose US Ring Size:
Size 6 (This Listing)
Size 6.5
Size 7
Size 7.5
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 10.5
Size 11
Size 11.5
Size 12
by
ceramicwombat
A set of seven dice including an extra decader d10 for generating percentile results.
by
cunicode
one cup a day
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics
View the collection
new: available in Black Ceramics
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics
View the collection
new: available in Black Ceramics
by
Ammnra
Two Part Ring based on Portal 2 GLaDOS.
SIZE 6
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
Two Part Ring based on Portal 2 GLaDOS.
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. If you want to can lock the parts together with some super glue.
US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
SIZE 6
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
Two Part Ring based on Portal 2 GLaDOS.
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. If you want to can lock the parts together with some super glue.
US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
by
edrice
UPDATE02/12: The ring has been redone and should hopefully work with silver. As usual any other metal other than silver will give a more faded less detailed result due to the printing process. Get it in silver for the high detailed look, or in other metals for the antique battle worn look.
"An assassin's ring with a gap in the bottom to activate a hidden blade.
The ring itself is about 20mm wide, that should translate to 10¼ ring size in the US."
by
MichaelMueller
No matter what everyone say... you deserve it!
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
by
henryseg
This steampunk style knotted cog was procedurally generated using 3-dimensional spherical geometry, then stereographically projected into our (mostly) Euclidean universe.
Other sizes:
www.shapeways.com/model/231026/knotted_cog__large_.html
www.shapeways.com/model/231045/knotted_cog.html
www.shapeways.com/model/277265/knotted_cog__smaller_.html
www.shapeways.com/model/232385/knotted_cog__small_.html
Other sizes:
www.shapeways.com/model/231026/knotted_cog__large_.html
www.shapeways.com/model/231045/knotted_cog.html
www.shapeways.com/model/277265/knotted_cog__smaller_.html
www.shapeways.com/model/232385/knotted_cog__small_.html
by
juniortan
A satire on superheroes, gadgets, consumerism and small caliber arms. As featured on Gizmodo, the Revolver iPhone is as irreverent, silly, amusing and provocative as ever.
http://gizmodo.com/#!5551267/irevolver
Please note that the model has been updated with a lot less material needed for printing (cheaper), and now incorporates a slot and space for an original iPhone USB cable, so you don't have to dismount the phone to charge/sync.
This iPhone case is designed to only fit the iPhone 4, and fit is by press fit; you may need to sand the inner surface to hold the iPhone properly.
IMPORTANT:
You need to order the USB cradle separately.
http://www.shapeways.com/model/230215/iphone4_ruger___usb_cradle.html?gid=ug40945
http://gizmodo.com/#!5551267/irevolver
Please note that the model has been updated with a lot less material needed for printing (cheaper), and now incorporates a slot and space for an original iPhone USB cable, so you don't have to dismount the phone to charge/sync.
This iPhone case is designed to only fit the iPhone 4, and fit is by press fit; you may need to sand the inner surface to hold the iPhone properly.
IMPORTANT:
You need to order the USB cradle separately.
http://www.shapeways.com/model/230215/iphone4_ruger___usb_cradle.html?gid=ug40945
by
Ammnra
Two Part Ring based on Portal 2 GLaDOS.
SIZE 6
NOTE: This is just the white "face" part of the ring.
You must also order ”GLaDOS Ring (Black "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
NOTE: This is just the white "face" part of the ring.
You must also order ”GLaDOS Ring (Black "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
artfulshrapnel
The worst ear plug the internet has to offer. Use this size for gauges up to 1" in diameter. Designed with a slightly raised rim for a snug fit.
To Clarify: These earplugs are sold individually, not in pairs!
If you need a size larger than 1" diameter, please PM me and let me know what size you need. I'll want to scale up the hands and adjust the ring thickness accordingly to make sure it stays light enough to wear comfortably.
The printed copy shown is a 7/16" version printed in white detail material. I recommend this material, as it is more comfortable for wear and has a smoother look.
Make sure to specify a size in the Co-Creator Template, there is no standard size for this model!
For standard sizes up to 00 gauge, you'll want this model:
http://www.shapeways.com/model/213239/goatsearring_standard_gauges.html?gid=ug37365
To Clarify: These earplugs are sold individually, not in pairs!
If you need a size larger than 1" diameter, please PM me and let me know what size you need. I'll want to scale up the hands and adjust the ring thickness accordingly to make sure it stays light enough to wear comfortably.
The printed copy shown is a 7/16" version printed in white detail material. I recommend this material, as it is more comfortable for wear and has a smoother look.
Make sure to specify a size in the Co-Creator Template, there is no standard size for this model!
For standard sizes up to 00 gauge, you'll want this model:
http://www.shapeways.com/model/213239/goatsearring_standard_gauges.html?gid=ug37365
