by
roessnakhan
A replica of Cobb's totem from the film "Inception". As a below review has noted, and from my own version, the top works very well, and spins upwards of 90 seconds before toppling. You just might be in a dream.
by
QUATRO
Product Name "CLaDOS Ring". Designed by QUATRO.
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)
If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.
Conversion chart for ring sizes:
US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm
I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)
If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.
Conversion chart for ring sizes:
US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm
I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)
by
NovastarDesign
Skyrim pendant
I made a pendant inspired from the The Imperial Symbol of the game Elder Scrolls V: Skyrim. I hope people who love this game also love this pendant. On the top of the wings are two holes, so you can wear it like a pendant. The pendant is double sided, both sides look the same. The picture shows the wrong way ;-0
I already have pictures of the pendant in stainless steel pictures in stainless steel
Also check out my Skyrim 'Dragonborn' ring Skyrim 'Dragonborn' ring.
The pendant is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.
I made a pendant inspired from the The Imperial Symbol of the game Elder Scrolls V: Skyrim. I hope people who love this game also love this pendant. On the top of the wings are two holes, so you can wear it like a pendant. The pendant is double sided, both sides look the same. The picture shows the wrong way ;-0
I already have pictures of the pendant in stainless steel pictures in stainless steel
Also check out my Skyrim 'Dragonborn' ring Skyrim 'Dragonborn' ring.
The pendant is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.
by
NovastarDesign
Skyrim pendant
I made a pendant inspired from the The Imperial Symbol of the game Elder Scrolls V: Skyrim. I hope people who love this game also love this pendant. On the top of the wings are two holes, so you can wear it like a pendant. The pendant is double sided, both sides look the same. The picture shows the wrong way ;-0
I already have pictures of the pendant in stainless steel pictures in stainless steel
Also check out my Skyrim 'Dragonborn' ring Skyrim 'Dragonborn' ring.
The pendant is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.
I made a pendant inspired from the The Imperial Symbol of the game Elder Scrolls V: Skyrim. I hope people who love this game also love this pendant. On the top of the wings are two holes, so you can wear it like a pendant. The pendant is double sided, both sides look the same. The picture shows the wrong way ;-0
I already have pictures of the pendant in stainless steel pictures in stainless steel
Also check out my Skyrim 'Dragonborn' ring Skyrim 'Dragonborn' ring.
The pendant is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.
by
avandius
This is a 16mm to 24mm dice set modeled after the Deathly Hallows from Harry Potter.
The Black Strong & Flexible set (red background) was hand-painted using Spanish Copper and Gold rub'n'buff (sold separately).
Alumide set was dyed black and painted with silver enamel (sold separately).
The Black Strong & Flexible set (red background) was hand-painted using Spanish Copper and Gold rub'n'buff (sold separately).
Alumide set was dyed black and painted with silver enamel (sold separately).
by
virtox
Dodecahedral sibling of Gyro the Cube.
Same principle, more faces, more rings and more fun ;-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 6.5cm / 2.5" version, see the Gyro the Forms
Experimental corner stand available here
Instructions
For tighter clearances it is printed with the hinges out of place. So this model needs a little manual assembly. Each element has two "knobs" which need to be "clicked" into the corresponding "clamps" in the parent element.
It's easiest to start with the inner one and then continue outwards.
And then... rotate away !
Same principle, more faces, more rings and more fun ;-)
Made of five nested dodecahedra, each one is limited to rotate about it's own axis.
This is the 6.5cm / 2.5" version, see the Gyro the Forms
Experimental corner stand available here
Instructions
For tighter clearances it is printed with the hinges out of place. So this model needs a little manual assembly. Each element has two "knobs" which need to be "clicked" into the corresponding "clamps" in the parent element.
It's easiest to start with the inner one and then continue outwards.
And then... rotate away !
by
nakamura_shop
-Default size is D.18mm (finger diameter)
- Assassin's ring the size is adaptable because the ring is flexible
- now the model is a Co-creator
- Suggest for all... if you want enlarge the ring you have to flex the wings,not the Assassin symbol
by
NovastarDesign
Skyrim 'Dragonborn' ring
Your own Skyrim ring ! Write your own (character) name in Draconic language..(now it's writing Novastar)
The pictures of the ring are in stainless steel
pictures in stainless steel
Also check out my Skyrim pendant Skyrim pendant .
Personalize your ring by choosing a ring size.
~
Sizes
~
Size 5 / 15
Inner diameter: 0.61 inch / 15.70 mm
Inner circumference: 1.94 inch / 49.21 mm
~
Size 6 / 16
Inner diameter: 0.64 inch / 16.51 mm
Inner circumference: 2.06 inch / 52.39 mm
~
Size 7 / 17
Inner diameter: 0.68 inch / 17.35 mm
Inner circumference: 2.19 inch / 55.56 mm
~
Size 8 / 18
Inner diameter: 0.71 inch / 18.19 mm
Inner circumference: 2.31 inch / 58.74 mm
~
Size 9 / 19
Inner diameter: 0.74 inch / 18.89 mm
Inner circumference: 2.44 inch / 61.91 mm
~
Size 10 / 20
Inner diameter: 0.77 inch / 19.84 mm
Inner circumference: 2.56 inch / 65.09 mm
~
Size 11 / 21
Inner diameter: 0.81 inch / 20.68 mm
Inner circumference: 2.69 inch / 68.26 mm
The ring is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.
var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-27376216-1']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })();
Your own Skyrim ring ! Write your own (character) name in Draconic language..(now it's writing Novastar)
The pictures of the ring are in stainless steel
pictures in stainless steel
Also check out my Skyrim pendant Skyrim pendant .
Personalize your ring by choosing a ring size.
~
Sizes
~
Size 5 / 15
Inner diameter: 0.61 inch / 15.70 mm
Inner circumference: 1.94 inch / 49.21 mm
~
Size 6 / 16
Inner diameter: 0.64 inch / 16.51 mm
Inner circumference: 2.06 inch / 52.39 mm
~
Size 7 / 17
Inner diameter: 0.68 inch / 17.35 mm
Inner circumference: 2.19 inch / 55.56 mm
~
Size 8 / 18
Inner diameter: 0.71 inch / 18.19 mm
Inner circumference: 2.31 inch / 58.74 mm
~
Size 9 / 19
Inner diameter: 0.74 inch / 18.89 mm
Inner circumference: 2.44 inch / 61.91 mm
~
Size 10 / 20
Inner diameter: 0.77 inch / 19.84 mm
Inner circumference: 2.56 inch / 65.09 mm
~
Size 11 / 21
Inner diameter: 0.81 inch / 20.68 mm
Inner circumference: 2.69 inch / 68.26 mm
The ring is inspired on the game Elder Scrolls V Skyrim. The rights and intellectual property of the game belongs to Bethesda Softworks, which did a great job on creating the Elder Scrolls series.
var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-27376216-1']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })();
by
aeron203
A clock frozen in time, the Time Keeper commemorates a birth date, an anniversary, or any other significant moment in your life, in history, or the future. It will keep that time with perfect accuracy, forever. You set the date and time. You can also include a short message below the date.
UPDATE: The Time Keeper has been thickened 50% to ensure printability.
UPDATE: The Time Keeper has been thickened 50% to ensure printability.
by
Eeppium
A ring with crystals growing from it .
*Hole diameter 18,20mm* Size 8.
*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring
*Hole diameter 18,20mm* Size 8.
*It is recommended to add clear nailpolish to the innerparts, that are in contact with skin* See also the earrings to go with the ring Crystal Earring
by
sbruins
"I see you..."
Available in US ring sizes 8-13
See http://en.wikipedia.org/wiki/Ring_size for ring size reference.
Default Ring size is 9-3/4
Images shown after light polishing.
Available in US ring sizes 8-13
See http://en.wikipedia.org/wiki/Ring_size for ring size reference.
Default Ring size is 9-3/4
Images shown after light polishing.
by
Ammnra
Ring based on Portal 2 Wheatley
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
ceramicwombat
A set of seven dice including an extra decader d10 for generating percentile results.
by
cunicode
one cup a day
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics
View the collection
new: available in Black Ceramics
Day 01: Octo Cup
30 days, 30 coffee cups project
[video} see the OctoCup 3D-Printed in Ceramics
View the collection
new: available in Black Ceramics
by
Ammnra
Ring Based on Ezio Vambrace and Hidden Blade from Assassin's Creed.
Vambrace rotates to reveal hidden blade design on band.
US Sizes 6-12 (in Half Sizes)
US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be painted. The parts will be one solid color.
Painting Guide
Choose US Ring Size:
Size 6 (This Listing)
Size 6.5
Size 7
Size 7.5
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 10.5
Size 11
Size 11.5
Size 12
Vambrace rotates to reveal hidden blade design on band.
US Sizes 6-12 (in Half Sizes)
US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be painted. The parts will be one solid color.
Painting Guide
Choose US Ring Size:
Size 6 (This Listing)
Size 6.5
Size 7
Size 7.5
Size 8
Size 8.5
Size 9
Size 9.5
Size 10
Size 10.5
Size 11
Size 11.5
Size 12
by
Ammnra
Two Part Ring based on Portal 2 GLaDOS.
SIZE 6
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
Two Part Ring based on Portal 2 GLaDOS.
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. If you want to can lock the parts together with some super glue.
US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
SIZE 6
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order ”GLaDOS Ring (White "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
Two Part Ring based on Portal 2 GLaDOS.
NOTE: This is just the black "eye" and "hat" parts of the ring.
You must also order GLaDOS Ring (White "Half" of Ring) to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. If you want to can lock the parts together with some super glue.
US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
by
edrice
UPDATE02/12: The ring has been redone and should hopefully work with silver. As usual any other metal other than silver will give a more faded less detailed result due to the printing process. Get it in silver for the high detailed look, or in other metals for the antique battle worn look.
"An assassin's ring with a gap in the bottom to activate a hidden blade.
The ring itself is about 20mm wide, that should translate to 10¼ ring size in the US."
by
MichaelMueller
No matter what everyone say... you deserve it!
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
It is written on the ring to remember you about this fact.
The default Ring Size is US 8.
Large diameter rings (sizes 10 - 12) have seven instead of six spikes... to fit nice.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5.5
Inside Diameter: 16.10 mm / 0.634 in
Inside circumference: 50.60 mm / 1.99 in
US Ring Size 6.5
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8 (default)
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 8.5
Inside Diameter: 18.54 mm / 0.73 in
Inside circumference: 58.3 mm / 2.29 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Note:
The silver material is very bright and shiny. Some designs look much better when deeper parts are blackened. You can do this easily by yourself by putting the silver jewelry in a small glass with bleach for a few minutes. After it turns dark, you can polish it partial with a sponge or a towel.
by
henryseg
This steampunk style knotted cog was procedurally generated using 3-dimensional spherical geometry, then stereographically projected into our (mostly) Euclidean universe.
Other sizes:
www.shapeways.com/model/231026/knotted_cog__large_.html
www.shapeways.com/model/231045/knotted_cog.html
www.shapeways.com/model/277265/knotted_cog__smaller_.html
www.shapeways.com/model/232385/knotted_cog__small_.html
Other sizes:
www.shapeways.com/model/231026/knotted_cog__large_.html
www.shapeways.com/model/231045/knotted_cog.html
www.shapeways.com/model/277265/knotted_cog__smaller_.html
www.shapeways.com/model/232385/knotted_cog__small_.html
by
juniortan
A satire on superheroes, gadgets, consumerism and small caliber arms. As featured on Gizmodo, the Revolver iPhone is as irreverent, silly, amusing and provocative as ever.
http://gizmodo.com/#!5551267/irevolver
Please note that the model has been updated with a lot less material needed for printing (cheaper), and now incorporates a slot and space for an original iPhone USB cable, so you don't have to dismount the phone to charge/sync.
This iPhone case is designed to only fit the iPhone 4, and fit is by press fit; you may need to sand the inner surface to hold the iPhone properly.
IMPORTANT:
You need to order the USB cradle separately.
http://www.shapeways.com/model/230215/iphone4_ruger___usb_cradle.html?gid=ug40945
http://gizmodo.com/#!5551267/irevolver
Please note that the model has been updated with a lot less material needed for printing (cheaper), and now incorporates a slot and space for an original iPhone USB cable, so you don't have to dismount the phone to charge/sync.
This iPhone case is designed to only fit the iPhone 4, and fit is by press fit; you may need to sand the inner surface to hold the iPhone properly.
IMPORTANT:
You need to order the USB cradle separately.
http://www.shapeways.com/model/230215/iphone4_ruger___usb_cradle.html?gid=ug40945
by
Ammnra
Two Part Ring based on Portal 2 GLaDOS.
SIZE 6
NOTE: This is just the white "face" part of the ring.
You must also order ”GLaDOS Ring (Black "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
NOTE: This is just the white "face" part of the ring.
You must also order ”GLaDOS Ring (Black "Half" of Ring)” to have all the parts to make the ring.
The two part version comes 90% colored.
(You still need to paint the yellow and red eye dots on the black part)
The two parts just snap together. You can lock the 3 parts together with some super glue.
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6 White
Click for Size 6 Black
Click for Size 6.5 White
Click for Size 6.5 Black
Click for Size 7 White
Click for Size 7 Black
Click for Size 7.5 White
Click for Size 7.5 Black
Click for Size 8 White
Click for Size 8 Black
Click for Size 8.5 White
Click for Size 8.5 Black
Click for Size 9 White
Click for Size 9 Black
Click for Size 9.5 White
Click for Size 9.5 Black
Click for Size 10 White
Click for Size 10 Black
Click for Size 10.5 White
Click for Size 10.5 Black
Click for Size 11 White
Click for Size 11 Black
Click for Size 11.5 White
Click for Size 11.5 Black
Click for Size 12 White
Click for Size 12 Black
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
Each part will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
artfulshrapnel
The worst ear plug the internet has to offer. Use this size for gauges up to 1" in diameter. Designed with a slightly raised rim for a snug fit.
To Clarify: These earplugs are sold individually, not in pairs!
If you need a size larger than 1" diameter, please PM me and let me know what size you need. I'll want to scale up the hands and adjust the ring thickness accordingly to make sure it stays light enough to wear comfortably.
The printed copy shown is a 7/16" version printed in white detail material. I recommend this material, as it is more comfortable for wear and has a smoother look.
Make sure to specify a size in the Co-Creator Template, there is no standard size for this model!
For standard sizes up to 00 gauge, you'll want this model:
http://www.shapeways.com/model/213239/goatsearring_standard_gauges.html?gid=ug37365
To Clarify: These earplugs are sold individually, not in pairs!
If you need a size larger than 1" diameter, please PM me and let me know what size you need. I'll want to scale up the hands and adjust the ring thickness accordingly to make sure it stays light enough to wear comfortably.
The printed copy shown is a 7/16" version printed in white detail material. I recommend this material, as it is more comfortable for wear and has a smoother look.
Make sure to specify a size in the Co-Creator Template, there is no standard size for this model!
For standard sizes up to 00 gauge, you'll want this model:
http://www.shapeways.com/model/213239/goatsearring_standard_gauges.html?gid=ug37365
by
opresco
• 20 faceted dice (based on the icosahedron) • Could be worn as a pendant • Lanyard not included.•
Uses the same original construction algorithm as the popular DODCLOCK DIE and the 32-BIT SOCCER BALL DIE
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
Uses the same original construction algorithm as the popular DODCLOCK DIE and the 32-BIT SOCCER BALL DIE
See my New Spring Loaded Dice:
Spring-loaded 30-sided die.
Spring-loaded Icodie.
Spring-loaded die.
by
COVO
Product Name "Ring of the gamer". Designed by Japan.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
by
MichaelMueller
Harr, harr, pirate stuff.
Ship ahoy!
The default Ring Size is US 6.5.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5
Inside Diameter: 15.7 mm / 0.618 in
Inside circumference: 49.3 mm / 1.94 in
US Ring Size 5.5
Inside Diameter: 16.1 mm / 0.634 in
Inside circumference: 50.6 mm / 1.99 in
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
Ship ahoy!
The default Ring Size is US 6.5.
Use one of the following links to choose a different ring size.
US Ring Size 4
Inside Diameter: 14.88 mm / 0.586 in
Inside circumference: 46.80 mm / 1.84 in
US Ring Size 5
Inside Diameter: 15.7 mm / 0.618 in
Inside circumference: 49.3 mm / 1.94 in
US Ring Size 5.5
Inside Diameter: 16.1 mm / 0.634 in
Inside circumference: 50.6 mm / 1.99 in
US Ring Size 6.5 (default)
Inside Diameter: 16.92 mm / 0.666 in
Inside circumference: 53.15 mm / 2.09 in
US Ring Size 7
Inside Diameter: 17.32 mm / 0.682 in
Inside circumference: 54.41 mm / 2.14 in
US Ring Size 8
Inside Diameter: 18.14 mm / 0.714 in
Inside circumference: 56.86 mm / 2.24 in
US Ring Size 9
Inside Diameter: 18.95 mm / 0.746 in
Inside circumference: 59.69 mm / 2.34 in
US Ring Size 10
Inside Diameter: 19.76 mm / 0.778 in
Inside circumference: 62.20 mm / 2.44 in
US Ring Size 11
Inside Diameter: 20.57 mm / 0.81 in
Inside circumference: 64.72 mm / 2.54 in
US Ring Size 12
Inside Diameter: 21.39 mm / 0.842 in
Inside circumference: 67.23 mm / 2.65 in
Other size needed? Just send me a message!
by
Ammnra
Ring inspired by the Omni Tool and Omni Blade from the Mass Effect universe
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Painted with 6 thin coats of Orange Transparent Glass Paint (Americana Crystal Gloss Enamels)
Black line painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Painted with 6 thin coats of Orange Transparent Glass Paint (Americana Crystal Gloss Enamels)
Black line painting guide
Thanks for your order and commitment to nerd culture!
by
noesis
3D-printed metal Swan Station Failsafe Key just like Desmond's from LOST.
This unique pendant is can be attached to a chain or cord and worn as a necklace or you can attach it to your keychain for a one of a kind LOST inspired keyfob!
Recommended in Stainless steel, gold, bronze or alumide. Shown in Stainless Steel.
This unique pendant is can be attached to a chain or cord and worn as a necklace or you can attach it to your keychain for a one of a kind LOST inspired keyfob!
Recommended in Stainless steel, gold, bronze or alumide. Shown in Stainless Steel.
by
COVO
Product Name "Screwdriver Ring". Designed by Japan.
Available in either stainless steel (antique bronze & gold plated)
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
Available in either stainless steel (antique bronze & gold plated)
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
by
Ammnra
Ring based on Portal 2 GLaDOS.
US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
The ring will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
US Sizes 6-12 (in Half Sizes)
Click for US Sizes/Inner Dia
The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
The ring will be one solid color.
Click for quick and easy detail painting guide
Click Personalize to choose options and to add to cart.
Thanks for your order and commitment to nerd culture!
by
aeron203
The moon is now customizable. 1.5 inches wide. The placement and orientation of the loop can be set to your preference.
by
Ammnra
Ring inspired by Thermal Clips and N7 from the Mass Effect universe
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
by
edrice
Assassin's creed themed ring, size 10 US. The details in Stainless steel, might be washed due to the printing process, giving it an antique look but not detailed. Choose your material accordingly.
by
Ammnra
Ring based on Portal 2 Space Core
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
SIZE 6
Available in US Sizes 6-12 (in Half Sizes)
Click for Size 6
Click for Size 6.5
Click for Size 7
Click for Size 7.5
Click for Size 8
Click for Size 8.5
Click for Size 9
Click for Size 9.5
Click for Size 10
Click for Size 10.5
Click for Size 11
Click for Size 11.5
Click for Size 12
Due to material shrinkage, select one half size higher when ordering in Stainless Steel/Gold/Bronze
Actual Ring size is 0.3mm larger than diameter listed to account for ring width.
Click for US Sizes/Inner Dia
ATTENTION:The rings in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Click for quick and easy detail painting guide
Thanks for your order and commitment to nerd culture!
