by
QUATRO
GLaDOS Pendant
Stop going unnoticed with your boring regular looks and start attracting the attention you so deserve with this ultra-classy GLaDOS pendant! Show the world you're a fan of Portal! ;)
One of the most popular items, the GLaDOS ring (available on my shop) now has a little brother - a shiny pendant!
The pendant is made out of a solid piece of material of your choice.I personally recommend Steel and Silver, however plastic is also available if you wish to do some DIY painting :)
Please choose your material carefully as this will affect the look and feel of the pendant!
> To see a full 3D preview - click on the little cube icon to the right of the image frame
> To see available materials and prices - see the dropdown menu to the right
The pendant is around 3cm in height and close to 2cm in width. It is made to resemble the head of GLaDOS, which is easy to recognize :)
If you have any questions - feel free to send me a message using any preferred contact method.
Enjoy and be sure to see more available items at 'uncle QUATRO's workshop'!
http://www.shapeways.com/shops/unclequatro
Stop going unnoticed with your boring regular looks and start attracting the attention you so deserve with this ultra-classy GLaDOS pendant! Show the world you're a fan of Portal! ;)
One of the most popular items, the GLaDOS ring (available on my shop) now has a little brother - a shiny pendant!
The pendant is made out of a solid piece of material of your choice.I personally recommend Steel and Silver, however plastic is also available if you wish to do some DIY painting :)
Please choose your material carefully as this will affect the look and feel of the pendant!
> To see a full 3D preview - click on the little cube icon to the right of the image frame
> To see available materials and prices - see the dropdown menu to the right
The pendant is around 3cm in height and close to 2cm in width. It is made to resemble the head of GLaDOS, which is easy to recognize :)
If you have any questions - feel free to send me a message using any preferred contact method.
Enjoy and be sure to see more available items at 'uncle QUATRO's workshop'!
http://www.shapeways.com/shops/unclequatro
by
QUATRO
Companion Cube storage box
Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!
From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!
If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?
The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)
Please also check out other products on my store and do not hesitate to contact me if you have any questions!
Dimensions:
> Storage compartment (inner space): 30x30x30mm
> Outer maximum boundaries: 43x43x43mm
Other sizes and prices available on my store!
From the creator of the well-known GLaDOS ring comes a brand new accessory that is sure to be turning heads of those who see it - the Companion Cube storage box!
If you are a Portal geek like me - you know that the Companion Cube is basically a loveable version of Aperture Science Weighted Storage Cube. So if it's a storage cube - why not store something in it!
This little buddy is perfect for stashing your favorite pice(s) of jewelry or other small nick-knacks in style. Maybe it could even become a box for an engagement ring...?
The cube's corners reach up to ~6.4mm in thickness and the walls are as thick as ~3mm, so you are guaranteed that the cube will withstand rough conditions!
\ The actual product may not look like in the presented pictures - it comes in a single color, depending on the material you've chosen from the material list to the right! If you select durable plastic material, it is perfect for painting if you so desire :)
Please also check out other products on my store and do not hesitate to contact me if you have any questions!
by
Tofty
I present the second version of my keychain tritium lantern for use with a 3x22.5mm tritium vial (tritium vial not included) and does not require a clear tube like my first version.
The attachment hole is 2mm wide and is perfect for a 10mm split ring (not included).
The tritium vial should be set using a UV activated optically clear adhesive such as Norland 61 or Loctite glass bond. These adhesives will cure in direct sunlight in an hour or so.
There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.
The attachment hole is 2mm wide and is perfect for a 10mm split ring (not included).
The tritium vial should be set using a UV activated optically clear adhesive such as Norland 61 or Loctite glass bond. These adhesives will cure in direct sunlight in an hour or so.
There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.
by
Ammnra
Pendant (or earring) inspired by my favorite quarian engineer Tali'zorah Vas Normandy from the Mass Effect universe (BioWare)
ATTENTION:The parts in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Silver Detail Process:
Masked off frame with painter’s tape
Spray painted “Lens” section with a few thin coats Transparent purple (VHT SP452 Anodized Purple via Amazon)
Removed masking and painted the frame with a thin coat of Black Transparent Glass Paint for detail lines
Transparent Detail Process:
Dyed entire part with Purple RIT Fabric Dye (Dyeing Guide)
Painted the frame with Silver (Americana Gloss Enamels)
Painted entire part with 2 thin coats of Black Transparent Glass Paint for detail lines and to darken the purple (Americana Crystal Gloss Enamels)
Loyality Gold sections done with careful application of Rub 'N Buff
Steel/Alumide Detail Process:
Masked off frame with painter’s tape
Spray painted silver base coat on “Lens” section
Spray painted “Lens” section with a few thin coats Transparent purple (VHT SP452 Anodized Purple via Amazon)
Removed masking and painted the frame with a thin coat of Black Transparent Glass Paint for detail lines
General Detailing Guide
Thanks for your order and commitment to nerd culture!
ATTENTION:The parts in the video/pics have been detail painted. The Shapeways parts will NOT be.
They will be one solid color.
Silver Detail Process:
Masked off frame with painter’s tape
Spray painted “Lens” section with a few thin coats Transparent purple (VHT SP452 Anodized Purple via Amazon)
Removed masking and painted the frame with a thin coat of Black Transparent Glass Paint for detail lines
Transparent Detail Process:
Dyed entire part with Purple RIT Fabric Dye (Dyeing Guide)
Painted the frame with Silver (Americana Gloss Enamels)
Painted entire part with 2 thin coats of Black Transparent Glass Paint for detail lines and to darken the purple (Americana Crystal Gloss Enamels)
Loyality Gold sections done with careful application of Rub 'N Buff
Steel/Alumide Detail Process:
Masked off frame with painter’s tape
Spray painted silver base coat on “Lens” section
Spray painted “Lens” section with a few thin coats Transparent purple (VHT SP452 Anodized Purple via Amazon)
Removed masking and painted the frame with a thin coat of Black Transparent Glass Paint for detail lines
General Detailing Guide
Thanks for your order and commitment to nerd culture!
by
Tofty
This is the second version of my small keychain tritium lantern for use with a 3x22.5mm tritium vial (tritium vial not included) and does not require a clear tube like my first version.
This model has been scaled for printing in stainless steel.
The attachment hole is 2mm wide and is perfect for a 10mm split ring (not included).
The tritium vial should be set using a UV activated optically clear adhesive such as Norland 61 or Loctite glass bond. These adhesives will cure in direct sunlight in an hour or so.
Due to potential irregularities in the stainless steel printing process some drilling may be required on the lanyard hole and tritium vial channel to ensure correct fit.
There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.
This model has been scaled for printing in stainless steel.
The attachment hole is 2mm wide and is perfect for a 10mm split ring (not included).
The tritium vial should be set using a UV activated optically clear adhesive such as Norland 61 or Loctite glass bond. These adhesives will cure in direct sunlight in an hour or so.
Due to potential irregularities in the stainless steel printing process some drilling may be required on the lanyard hole and tritium vial channel to ensure correct fit.
There are some more photos of this object and other examples of my work, both 3D printed and otherwise, on my 'Tofty' facebook page.
