This is a generic model of the Puffing Billy Railway NA.

It fits over a Graham Farish Class 08 N scale mechanism.

The kit contains the following parts :
1 The NA Body
2 A pair of bogies and wheelsets(1.5mm dia screws are needed to fix the bogies to the body.)
3 A chimney which can be fixed on the spigot provided.
4 Three pairs of number plates (1A,14A,17A) with tabs that fit into slots in the side tanks.
5 Two caps that fit into slots under the water tanks.
6 Two pairs of connecting rods.(The working of these rods has not been tested)

A second chimney and number plates ie.2A to 17A are available separately in my shop.
Slots are provide for attaching N scale micro-couplers.
The side tanks are hollow which can filled with araldite and buckshot to increase weight.

The fine detail of the number plates print well only in the Frosted Ultra-Detail version.Decals can be used if you order this model in the Frosted detail material.

The decal sheet for this model can be downloaded below:
http://www.shapeways.com/forum/index.php?t=msg&goto=52567msg_52567

The dimensions of this loco are "7.9 l x 2.9 w x 4.1 h" in cm.

This locomotive fits over a Graham Farish Class 08 N scale mechanism.
Dimples are added to locate the positions of the handrail stanchions and front and rear horn clusters.
Slots are provided for fitting microtrain couplers.

The decal sheet for this model can be downloaded in the following link:
http://www.shapeways.com/forum/index.php?t=msg&goto=50296msg_50296

The dimensions of this model after assembly are "7.4 l x 2.4 w x 3.5 h" in cm.

The mechanism for this locomotive is a "DUO91054D-12 Drive Unit".

Please check the link below :
http://www.madge00n3.co.uk/pdf/DU091054D-12.pdf

The decal sheet for this model is available for download in the link below.
http://www.shapeways.com/forum/index.php?t=msg&goto=49931msg_49931

The front and rear bogies have been modeled as separate objects.A pair of 1.5mm dia screws are needed to fix them to the body.

Slots are provided to fix micro-train couplers.

Dimples have been added to mark the locations of the handrail stanchions.

This model is also available in 1:76.2 scale.

This locomotive fits over a LifeLike GP 18.A bit of filing might be needed for making the motor fit the body.

Side frames have to be removed from the body shell and attached to the donor mechanism (a Life Like GP 18 - the older version with the plastic frame - NOT the newer metal split frame version).
The donor's bogie side frames filed flat and super gluing the 3D frames on.

The Decals for this model can be downloaded from the link below:
http://www.shapeways.com/forum/index.php?t=msg&th=10511&start=0&

The mechanism for this model is a "Pro-hobby Caramel Ca-ND 1".
Link to the mechanism:
http://www.osbornsmodels.com/pro-hobby-ca-nd-1-carmel-micro-n-scale-chassis-8727-p.asp

Handrails can be added using the locating dimples which are provided in the model

The decal sheet for this model can be downloaded from the link below:
http://www.shapeways.com/forum/index.php?t=msg&goto=50814msg_50814

This model is also available in 1:43 and 1:76.2 Scale.

You know you need the Tim Burton era Batmobile on your layout. You just know it. Now you can have it!