virtox
I strive to create thought-provoking 3d printing designs.
Inspiration comes from technology, biology, mathematics, physics and chemistry.
Expertise:
- Designer
- Artist
- Maker
by
virtox
Temporarily offline while I tweak it slightly!
Send me a message if you would like to stay updated!
Gyro the Cube (S)
(Version with loop >> here)
As with the original the cubes the hinges need to be put in place after you receive it.
And as this is are quite small, this might be a bit fidgety.
I will work on some instructions/tips.
Send me a message if you would like to stay updated!
Gyro the Cube (S)
(Version with loop >> here)
As with the original the cubes the hinges need to be put in place after you receive it.
And as this is are quite small, this might be a bit fidgety.
I will work on some instructions/tips.
by
virtox
Larger version of the Eardrops IV - Hopf model.
Redesigned and tested for the Strong & Flexible materials.
Photo's soon.
Earring hooks included, courtesy of Shapeways!
Redesigned and tested for the Strong & Flexible materials.
Photo's soon.
Earring hooks included, courtesy of Shapeways!
by
virtox
Cubichain Bracelet (L) 20 cm/7.9 inch
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 20 cm/7.9 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 20 cm/7.9 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
by
virtox
Cubichain Bracelet (M) 18 cm / 7.1 inch
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 18 cm/7.1 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 18 cm/7.1 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
by
virtox
Cubichain Bracelet (XL) 22 cm/8.7 inch
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 22 cm/8.7 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 22 cm/8.7 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
by
virtox
After World Peace I and World Peace II got rejected,
it was silent for a long time.
But the world could wait no longer, so it was high time for World Peace III
Please watch the video for details and instructions.
http://www.youtube.com/watch?v=kJe-vIxyzFU
A combinatory 3D print consisting of a two-part cage design with a peace logo and a color sandstone printed globe.
This is the cage part, you will also need the colored earth globe.
Get a complete set below.
It's a bit tricky to fit together, but please just be gentle :-)
The nylon cage material is quite flexible as you can see in the video, but rude force might break it.
For optimal longevity I recommend to coat the globe in a clear spray paint and glue the cage parts together.
+ 
Other shapes and size will be available soon!
it was silent for a long time.
But the world could wait no longer, so it was high time for World Peace III
Please watch the video for details and instructions.
http://www.youtube.com/watch?v=kJe-vIxyzFU
A combinatory 3D print consisting of a two-part cage design with a peace logo and a color sandstone printed globe.
This is the cage part, you will also need the colored earth globe.
Get a complete set below.
It's a bit tricky to fit together, but please just be gentle :-)
The nylon cage material is quite flexible as you can see in the video, but rude force might break it.
For optimal longevity I recommend to coat the globe in a clear spray paint and glue the cage parts together.
Get a complete set
+ Other shapes and size will be available soon!
by
virtox
After World Peace I and World Peace II got rejected,
it was silent for a long time.
But the world could wait no longer, so it was high time for World Peace III
Please watch the video for details and instructions.
http://www.youtube.com/watch?v=kJe-vIxyzFU
A combinatory 3D print consisting of a two-part cage design with a peace logo and a color sandstone printed globe.
This is the brightly colored earth globe for use in the Peace cage.
Get a complete set below.
It's a bit tricky to fit together, but please just be gentle :-)
The nylon cage material is quite flexible as you can see in the video,
but brute force may break it.
For optimal longevity I recommend to coat the globe in a clear spray paint and glue the cage parts together.
+
Other shapes and size will be available soon!
it was silent for a long time.
But the world could wait no longer, so it was high time for World Peace III
Please watch the video for details and instructions.
http://www.youtube.com/watch?v=kJe-vIxyzFU
A combinatory 3D print consisting of a two-part cage design with a peace logo and a color sandstone printed globe.
This is the brightly colored earth globe for use in the Peace cage.
Get a complete set below.
It's a bit tricky to fit together, but please just be gentle :-)
The nylon cage material is quite flexible as you can see in the video,
but brute force may break it.
For optimal longevity I recommend to coat the globe in a clear spray paint and glue the cage parts together.
Get a complete set
+ Other shapes and size will be available soon!
by
virtox
Cubichain Bracelet (XXL) 24 cm/9.4 inch
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 24 cm/9.4 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 24 cm/9.4 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
by
virtox
Running in Circles
A pair of large hypnotic earrings.
Inspired by ripple patterns in water.
Where one ripple ends, another begins.
Passing each other without interfering.
This is the Extra Large size.
Diameter of largest circle is 65mm, total height for one is 75mm.
Suitable for all Strong & Flexible materials.
Silver earrings hooks (not yet) included!
Also available in Large, Medium and Small
A pair of large hypnotic earrings.
Inspired by ripple patterns in water.
Where one ripple ends, another begins.
Passing each other without interfering.
This is the Extra Large size.
Diameter of largest circle is 65mm, total height for one is 75mm.
Suitable for all Strong & Flexible materials.
Silver earrings hooks (not yet) included!
Also available in Large, Medium and Small
by
virtox
Double Shell Emy
Two intertwined shells, made by revolving circles and perforated with holes.
Two intertwined shells, made by revolving circles and perforated with holes.
by
virtox
Wanna Jumble?
A closed loop of loops, with Hopf aspirations.
Three intertwined chains, pretending to be a ribbon.
But they can't resist to jumble :-)
Length is circa 66cm.
A closed loop of loops, with Hopf aspirations.
Three intertwined chains, pretending to be a ribbon.
But they can't resist to jumble :-)
Length is circa 66cm.
by
virtox
Siamese Orchid
An asymmetric double vessel inspired by intertwining flower patterns.
Not yet printed, image is preview render.
This was one of my entries in the Figulo/GrabCad Ceramics challenge.
Also available as a free download below.
Siamese Orchid by Virtox is licensed under the Creative Commons Attribution - Non-Commercial - No Derivatives license.
An asymmetric double vessel inspired by intertwining flower patterns.
Not yet printed, image is preview render.
This was one of my entries in the Figulo/GrabCad Ceramics challenge.
Also available as a free download below.
Siamese Orchid by Virtox is licensed under the Creative Commons Attribution - Non-Commercial - No Derivatives license.
by
virtox
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
This is the 56cm inner length Cubichain 12 necklace.
Suitable for the polished materials!
This unique eye-catcher will keep you distracted all day long :-)
This is the 56cm inner length Cubichain 12 necklace.
Suitable for the polished materials!
by
virtox
This is the corner stand for the XL 10cm Gyro the Cube model.
It should have enough clearance to easily place and pick-up the Cube.
This is a solid version and uses quite a lot of material.
I will try to improve the amount of material used, to reduce the price a bit, but this may negatively affect stability.
The stand has been tested on a home printer and this works nicely.
The Shapewqays print should be the same/better, I will be testing that soon.
It should have enough clearance to easily place and pick-up the Cube.
This is a solid version and uses quite a lot of material.
I will try to improve the amount of material used, to reduce the price a bit, but this may negatively affect stability.
The stand has been tested on a home printer and this works nicely.
The Shapewqays print should be the same/better, I will be testing that soon.
by
virtox
Cubichain Necklace 8
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
A closed loop of cubes, circa 60cm long.
Matching bracelet available: Cubichain Bracelet 8
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
A closed loop of cubes, circa 60cm long.
Matching bracelet available: Cubichain Bracelet 8
by
virtox
Cubichain Bracelet (S) 16 cm/6.3 inch
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 16 cm/6.3 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 16 cm/6.3 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
by
virtox
I used my Voxel engine to render some full color Mandelbulbs.
Currently the models are still solid, but already affordable.
Still low-res, as highly detailed fractals are not so compatible with full color sandstone ;-)
Not yet printed, feel free to try!
Currently the models are still solid, but already affordable.
Still low-res, as highly detailed fractals are not so compatible with full color sandstone ;-)
Not yet printed, feel free to try!
by
virtox
This is the corner stand for the L 7.5cm Gyro the Cube model.
It should have enough clearance to easily place and pick-up the Cube.
This is a solid version and uses quite a lot of material.
I will try to improve the amount of material used, to reduce the price a bit, but this may negatively affect stability.
To be tested.
It should have enough clearance to easily place and pick-up the Cube.
This is a solid version and uses quite a lot of material.
I will try to improve the amount of material used, to reduce the price a bit, but this may negatively affect stability.
To be tested.
by
virtox
Per request a larger version of the single eardrops as a pendant.
Hole size 2,8 mm.
by
virtox
Eno (XL/G)
While provocatively curved, she is indeed very shy!
She only allows a glowing glimpse of what she holds inside.
Eno XL Grand is the largest table models in this series at 37,5 cm tall.
This unique series of light shades is suitable LED lights,
for example Luxeon/Cree LEDs, but smaller led tea-light also work.
The shade hides the source from direct view, resulting in a gentle light emerging.
More evolutionary:
Other sizes and shapes available.
While provocatively curved, she is indeed very shy!
She only allows a glowing glimpse of what she holds inside.
Eno XL Grand is the largest table models in this series at 37,5 cm tall.
This unique series of light shades is suitable LED lights,
for example Luxeon/Cree LEDs, but smaller led tea-light also work.
The shade hides the source from direct view, resulting in a gentle light emerging.
More evolutionary:
Other sizes and shapes available.
by
virtox
Per request, a single version of the eardrop.
The hole is approximately 1.4mm
The hole is approximately 1.4mm
by
virtox
Cubichain Bracelet (XS) 14 cm/5.5 inch
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 cm/5.5 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 cm/5.5 inch.(may vary about 5%)
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
To aid in production and sorting the model is labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
by
virtox
This concept shape was designed for ceramics, but this may be very difficult to glaze properly, so Ceramics is only for the experimental and brave souls.
So I recommend either Sandstone or any of the Strong & Flexible and Alumide.
10 cm high.
So I recommend either Sandstone or any of the Strong & Flexible and Alumide.
10 cm high.
by
virtox
Tax report 2012 - Day 2
Reality, full of holes..
So I got to work more with one of my topological obsessions ;-)
This concept shape was designed for ceramics, but this may be very difficult to glaze properly, so Ceramics is only for the experimental and brave souls.
But you CAN get it in any of the Strong & Flexibles and Alumide!
Also added sandstone as an option.
Not entirely sure if this one will stand up properly though ;-)
10 cm high.
Day 3
Reality, full of holes..
So I got to work more with one of my topological obsessions ;-)
This concept shape was designed for ceramics, but this may be very difficult to glaze properly, so Ceramics is only for the experimental and brave souls.
But you CAN get it in any of the Strong & Flexibles and Alumide!
Also added sandstone as an option.
Not entirely sure if this one will stand up properly though ;-)
10 cm high.
Day 3
by
virtox
Tax report 2012 - Day 3
Compromise!
This concept shape was designed for ceramics, but has not been tested in Ceramics yet.
But you CAN get it in any of the Strong & Flexible and Alumide!
Also added sandstone as an option.
10 cm high.
So only for the brave soul as it is not printed yet.
Day 1
Compromise!
This concept shape was designed for ceramics, but has not been tested in Ceramics yet.
But you CAN get it in any of the Strong & Flexible and Alumide!
Also added sandstone as an option.
10 cm high.
So only for the brave soul as it is not printed yet.
Day 1
