My 3D printed medium mesh purse (6.3 x 5.3 x 1.8 inches, closed) featuring a sturdy, flexible mesh design and a reclosable clasp. See my smaller Small Mesh Purse. Two sizes of carrying straps are available separately: 45-inch chain strap, or 36-inch chain strap. View more 3D printed bags and purses here: VertigoPolka - Bags and Purses.

---

Want to get a set

(medium purse and 36-inch strap)?

+

---

Want to get a set

(medium purse and 45-inch strap)?

+

---

Here is a cubic interpretation of the classic trefoil torus knot.

There are also 50mm and 1-inch versions of this shape without the hanging loop.


Check out additional models of knots and torus knots in my Knots section, and see more of my pendants in my Pendants section.

This model is made of a two continuous bands that wrap diagonally around a torus shape 45 times before connecting to the original starting points. Here's two more Spiral Tori: Spiral Torus 110mm and a colored version Holiday Spiral Torus

This part consists of all five Platonic Solids nested one inside another.

From largest to smallest, there is an icosahedron (20 triangular faces), a dodecahedron (12 pentagonal faces), a hexahedron (6 square faces), a tetrahedron (4 triangular faces) and an octahedron (8 triangular faces).

The overall shape is a Rhombic Triacontrahedron, a combination of an icosahedron and dodecahedron).
These can be nested infinitely following the same order.

This bauble is made of three nested truncated icosahedrons, or buckyballs.
Check out my other pendant models in my Jewelry/Pendant section.

A soccerball (truncated icosahedron) that has been layered, fractalized and softened a bit. (size: 3 inches)

A classic right-handed trefoil knot.
Check out additional models of knots and torus knots in my Knots section.
Also check out the pendant version: Trefoil Knot Pendant.

Here's a very festive truncated icosahedron that knows how to party, or maybe partied just a little too much.

Here's a 36 inch (approx.) necklace made of 72 octahedron links. Each link is 5/8 inch by 3/8 inch (16mm x 9.5mm).

Also available:
An extra long 55-inch Octahedalink Necklace, with 120 octahedron links.
The super long 7-Foot Necklace, with 185 octahedron links.
And the 30-inch Octahedron Link Necklace with 36 larger, chunkier, clunkier octahedron links.

---

Want to get a set?

(the 36-inch necklace and matching earrings)?

+

---

Or the set of 3 necklaces?

(the 36-inch, 55-inch and 7-foot necklaces)?

+ +

---

Check out my other pendant models in my Jewelry/Pendant section.

This is a cubic interpretation of the classic trefoil knot.

These are not links; it is a single, looping (in a cubic sort of way) structure.

There is also a 50mm version available.
And a pendant version, here: Cubic Trefoil Knot Pendant.


Check out additional models of knots and torus knots in my Knots section.

This is the original hand-crank fan. A slimmer (and less expensive) version can be seen here: Hand-Crank Fan - slim, and both models are still being tweaked a bit before they are released for sale.

This model is specifically designed for the loose tolerances of the WSF materials, and is a single print with six moving parts, although not really effective as a real fan. The entire model is printed with all of the parts in position; nothing is assembled post-production. The 1:9 gear ratio (made of two sets of gears each with a 1:3 gear ratio) makes the fan blades rotate nine times around for every single rotation of the crank. The grip of the handle rotates freely as well.

Here's a 5-inch wide mobius band which has been sliced from a torus.

Note: I've made this model available in the detail materials, but have not printed in these materials yet.

Here's a 100mm high cup designed with a curved woven side wall.
I just received my print, and it's more flexible than I imagined.
Check out the attached video that shows its flexibility!

A Geodesic Sphere.

This coral-inspired model (with 3-fold rotational symmetry) was generated with a single mathematical expression using the implicit surfaces filter in MeshLab.
Please check out all of the other implicit surfaces at vertigo polka.

Also available:
Fuddle Silver
Fuddle Steel/Bronze
Fuddle Color (sandstone)
Fuddle Plastic (hollow)

A truncated icosahedron which has the pentagonal faces stellated outwards and the hexagonal faces stellated inwards.

Also available in a 100mm version.

Here's another interesting twisted, starry design with both icosahedral and dodecahedral symmetry.

Here is a cubic interpretation of the classic trefoil torus knot.
This version is slightly thinner and more open than the original version here: Cubic Trefoil Knot Pendant.

There is also a silver version of this design available here: CTK Silver Pendant.

Check out my other pendant models in my Jewelry/Pendant section.

Let this dodecahedron ornament be the star of your holidays! The gravity well on each side seems to be pulling the stars inward.

Additional ornaments from Vertigo Polka: Vertigo's Ornaments

This is your basic pea whistle, except that the "pea" is a plastic sphere.
It is VERY shrill and VERY loud! Great for emergency situations, or if you just want to be annoying.

A larger version of this whistle pendant is available here.


Due to the small size, this whistle pendant may require extra cleaning before use.

This is your basic pea whistle, except that the "pea" is a plastic sphere.
It is VERY shrill and VERY loud! Great for emergency situations, or if you just want to be annoying.


A smaller, even more annoying, version of this whistle is available here.


Due to the small size, this whistle pendant may require extra cleaning before use.

Here's my super long 7-foot (approx.) necklace made of 185 octahedron links. Each link is a little under 5/8 inch by 3/8 inch (16mm x 9.5mm).

Also available:
The original Octahedralink Necklace, a 36-inch necklace with 72 octahedron links, an extra long 55-inch Octahedalink Necklace with 120 links, and the shorter, heftier Octahedron Link Necklace, a 30-inch necklace with 36 larger, chunkier, clunkier octahedron links.

---

Want to get a set?

(the 36-inch, 55-inch and 7-foot necklaces)

+ +

---

Double Infinity Wedding Keepsake designed especially for my brother's wedding, but available now as a commemorative wedding keepsake to help celebrate your special moment with others. Price is for a single printed keepsake; does not include ring.

Here's a pair of earrings designed for my daughter, Alexa, for her birthday.

A companion Alexa pendant is available here: Alexa Pendant


Please check out the other pieces of plastic jewelry available in my shop: Jewelry - Plastic
My complete line of jewelry is displayed here: Jewely - All