by
MichielCornelissen
The Wrap is an accessory that attaches to the USB end of your iPhone charger, transforming it into a handy little cable winder for the charging cord.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
by
virtox
Cubichain bracelet (for custom sizes)
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.
Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch
A matching necklace available here:
Cubichain Necklace 8
Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
Interlocked cubes form a playful and delicate chain.
This unique eye-catcher will keep you distracted all day long :-)
Available in
Polished: sparkly white, coral red, royal blue, hot pink and violet purple.
Rough: black.
Details
Bracelet thickness: 8mm/0.3".
Minimal material thickness >1.0mm
Inner length: 14 to 24cm/5.5 to 9.4 Inch.
Actual length may vary about 5%, but material will stretch a little bit.
Which size?
Take a piece of string or measuring tape and wrap it around the widest part of your hand, as if putting on a bracelet. See example photo above.
Mark where it overlaps and measure the distance between the marks in cm.
For inches to cm -> multiply by 2.54.
Enter this cm value in the Inner Length field.
Popular sizes
You can order most popular sizes directly via the links below, this is cheaper and faster!
XS 14 cm/ 5.5 inch
S 16 cm/ 6.3 inch
M 18 cm/ 7.1 inch
L 20cm/ 7.9 inch
XL 22cm/ 8.7 inch
XXL 24cm / 9.4 inch
A matching necklace available here:
Cubichain Necklace 8
Remove Label
To aid in production and sorting the model will be labeled with a ring with info. You can cut of this ring with a strong pair of cutters/scissors.
by
curvecreative
Headbuddy
Apple headphones are great. Stylish, iconic and there when you need them. But we like to run and our Apple headphones don't.
The Headbuddy is a simple and affordable solution that means you can use your existing Apple headphones in a more effective way while running.
Just loop your headphones into the Headbuddy and you're good to go. The earbuds are held securely in such a way that retains the sound quality. Also works with handsfree.
Suitable for nearly all size and shape heads. Available in a range of colors
Click here to visit our site
Or click here to keep up to date on Facebook
by
Innovo
A simple, yet practical, headphone cord manager better suited for the alternative music crowd. This is the Standard version, most appropriate for large to medium sized headphones.Can accommodate a single or even two headphone pairs.
Rock on!!!
by
peter@tenonedesign.com
Puzzle Case will set your iPhone apart from all the rest. Order this one-of-a-kind design with your choice of color for the top and bottom pieces.
This is the bottom piece. Be sure to also order at least one Puzzle Case Top piece.
http://www.shapeways.com/model/362220/puzzle_case_top.html
by
unellenu
Celebrate that special moment with EPIC FAIL cufflinks.
Custom cufflinks are also available to order
The unellenu store on shapeways
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
model#cufflinks_13
Custom cufflinks are also available to order
The unellenu store on shapeways
shapeways.com/shops/unellenu
unellenu website unellenu.com
twitter: unellenu http://twitter.com/unellenu
facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813
youtube: unellenuhttp://www.youtube.com/unellenu1
model#cufflinks_13
