by
MichielCornelissen
Tool, symbol or both?
The bits on this pendant are based on actual bit sizes - including an IKEA standard tool - so 'a bit cross' can be used for light jobs. Just remember the steel isn't tempered like 'real' tool bits and tolerances may vary.
I recommend using it with a red leather cord of about 78 cm/ 31 inch.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
The bits on this pendant are based on actual bit sizes - including an IKEA standard tool - so 'a bit cross' can be used for light jobs. Just remember the steel isn't tempered like 'real' tool bits and tolerances may vary.
I recommend using it with a red leather cord of about 78 cm/ 31 inch.
If you are new to the Shapeways website: to order you will be asked to create an account (it's easy).
by
MichielCornelissen
The Wrap is an accessory that attaches to the USB end of your iPhone charger, transforming it into a handy little cable winder for the charging cord.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
This version of The Wrap works with recent US iPhone chargers and USB cables as shown in the images, up to those of iPhone 4 and iPhone 4S - please check before you purchase. There is currently no version of The Wrap available for iPhone 5 cables. It may work with other countries’ iPhone chargers too, but only if the geometry is exactly the same as the US version as shown here.
This product was originally developed for the European version of the iPhone charger - that version can be found here. The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Colors may vary - please check in the 'select material' section above for the latest versions. Some powder residue from the printing process may be left on the product; if that's the case, it should be easy to clean off. Product is shipped in standard Shapeways packaging.
You can have a look at all the products in my shop here. Shipping rates are flat, so you could divide them over several products. If you have any feedback or questions on this product, please feel free to e-mail me directly at michiel(at)michielcornelissen(dot)com. If you like, follow me on twitter.
A wholesale offer of 8 units of The Wrap at reduced prices is now available here.
by
COVO
Product Name "Keyboard Ring". Designed by Japan.
Type can be chosen the command key or the ctrl key.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
And key type choose the command key or the ctrl key.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
Type can be chosen the command key or the ctrl key.
Want to know more puroduct detail? Watch movie.
The material of movie is Silver Glossy.
Available in either stainless steel (antique bronze & gold plated) or silver.
The default size is 20.6 mm inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.)
Please refer to a this page.
And key type choose the command key or the ctrl key.
Conversion chart for ring sizes
US Ring Size Inside diameter
8 18.1mm
9 19.0mm
10 19.8mm
11 20.6mm
12 21.4mm
13 22.2mm
Please also see other designs.
Shop here.
http://www.shapeways.com/shops/forma
FORMA Laboratory Facebook Page!
by
andrew simpson
This phone allows you to use your phone while you are talking. It keeps the phone away from your head which is a good idea as the jury is still out on whether or not they cause brain tumors.
Just insert your Iphone earbuds and hands-free mic. The sound is crisp and clear.
The style is taken from an old Bakelite phone and is a joy to use.
Some tips from Vert Design...
We've found that the White Strong & Flexible material works well but gets dirty after a bit of use so printing in the Black or Red might be a better idea. Alternatively, why not paint in your own custom colour.
Be careful when screwing on the end caps. We've made a small cutout designed for the cable but if it falls out before you screw on the endcap, the cable can get pinched.
Check out the improved bass response in the standard earbuds. Interestingly, the earpiece acts as a speaker chamber and the lower frequencies are pretty impressive!
Just insert your Iphone earbuds and hands-free mic. The sound is crisp and clear.
The style is taken from an old Bakelite phone and is a joy to use.
Some tips from Vert Design...
We've found that the White Strong & Flexible material works well but gets dirty after a bit of use so printing in the Black or Red might be a better idea. Alternatively, why not paint in your own custom colour.
Be careful when screwing on the end caps. We've made a small cutout designed for the cable but if it falls out before you screw on the endcap, the cable can get pinched.
Check out the improved bass response in the standard earbuds. Interestingly, the earpiece acts as a speaker chamber and the lower frequencies are pretty impressive!
by
Luma3Dprint
This is my 1/20th scale model of my 2012 Fusionweld Chopper design. The wheelbase of this bike model is 85mm.
by
fx2
This box is designed to allow an easy customization. The corners and top/bottom frames are 3D printed and can be painted in any color later. The walls can be made in almost every possible material (1,5 to 2,5 mm thickness).
One side can be made in transparent plexiglas, or every sides and anything in between. The cutouts are all rectangular -see image file for dimensions-, thus easy cutting is garanteed.
Sidewalls are not glued, they are simply pinched on every side.
In some rare events, Freeduino and Arduino based installs need a little tweaking until everything works fine: I designed the lid to be easily removable (no screws).
Height of the corners can be customized to fit every shield. Please ask ! Size of the uploaded model is for Seeedstudio Seeeduino without shield.
For now untested – tolerances...
One side can be made in transparent plexiglas, or every sides and anything in between. The cutouts are all rectangular -see image file for dimensions-, thus easy cutting is garanteed.
Sidewalls are not glued, they are simply pinched on every side.
In some rare events, Freeduino and Arduino based installs need a little tweaking until everything works fine: I designed the lid to be easily removable (no screws).
Height of the corners can be customized to fit every shield. Please ask ! Size of the uploaded model is for Seeedstudio Seeeduino without shield.
For now untested – tolerances...
by
fx2
I wanted to create this flexible enclosure prototype which should protect an Arduino board optimally.
The flexible nature of the material has been integrated into design intent from the beginning . Lateral notches have been designed to held some wires. The board itself doesn't need to be screwed into enclosure, there is a snap fit which allows the Arduino to be inserted into the box. The special attachment system can be screwed on a wall, for instance.
I used the downloadable file of an Arduino UNO at http://grabcad.com/library/arduino-uno-reference-design for the renderings.
The flexible nature of the material has been integrated into design intent from the beginning . Lateral notches have been designed to held some wires. The board itself doesn't need to be screwed into enclosure, there is a snap fit which allows the Arduino to be inserted into the box. The special attachment system can be screwed on a wall, for instance.
I used the downloadable file of an Arduino UNO at http://grabcad.com/library/arduino-uno-reference-design for the renderings.
