Lynden Vuvan


tunabreath commented on AK Ghost Ring by tunabreath
June 25, 2015
AK Ghost Ring
tunabreath @miarreol They are 1mm dia x 0.5mm deep. It should be trivial to drill them out to whatever size you need to fit tritium (or fiber optic) inserts.
Micro Red Dot Mount for KJW 1911MEU and similar
tunabreath @iKonicTechServices The mount replaces the outer barrel entirely by fixing the inner barrel and hop up chamber to the frame at two points (front barrel contact, chamber secured by take down pin on the slide catch), rather than only the one point at the hop chamber and having a floating/tilting fake outer barrel with a slide to barrel lock up. That should theoretically improve accuracy, but I haven't done much testing. It's probably imperceptible, really. The mount attaches via the pic rail on the MEU frame dustcover. If the 2011 frame has similar dimensions, I don't see any reason why it wouldn't work. The main issue is if whichever slide you cut down has the appropriate length to fill out the gap from the mount and the frame, while still having material to retain the recoil spring bushing.
tunabreath @iKonicTechServices The barrel opening has to be drilled out a teeny bit for a snug fit, and the frame has to be drilled and tapped for the mounting screws. It was designed for a Detonics slide significantly chopped up, I'm not sure if it would work with any other slide design (plastic slide, optimally).


We're sorry to inform you that we no longer support this browser and can't confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:

Click anywhere outside this window to continue.