A simple 5mm mace using Decepticon iconography, for the egotistical antagonist.

Version 2.0

The Sonic Spike Projector is a weapon accessory that can be used as a heavy pistol or extended in length to form a kick ass rifle! It uses the 5mm peg system for handles and ports and is compatible with many different figures.

Putting the Projector together is a simple matter of twisting and sliding in both outer shells onto the central core and attaching the spike projectile on the front.

This accessory is designed as a counterpart to the shoulder cannon that comes with Fall of Cybertron Voyager Soundwave, and scales nicely with that figure.

Standard length is 95 mm long, extended length is 108 mm.

Version 1.0 has been tested in White Strong Flexible. Version 2.0 has not been tested yet.

This model has been tested in WSF. I have tested WSF polished but the polishing just removed too much material making the joints too loose.

This shield is leader class size and modeled after DOTM. It is made to fit fakebusker83's Optimus Prime hands. This piece requires assembly and a knife to cut the pin used to hold the sides to the base.

This is not intended for children. For adult collectors only.

Version 1.6

This is the Thugmeister, a tiny humanoid robot that stands about 2 inches tall. He is sturdy and very posable. His fists can hold 3mm peg compatible accessories and he comes with 2 hand blaster weapons.

By some odd quirk, he can fold up into a rough, disc-like shape...

Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.

Click here for "Fierier" variant Thugmeister.
Click here for the Thugmeister KaBlammers.

Radicon thread here.
Flickr gallery here.

One of my more popular designs, this sword has a standard 5mm handle which will work with most Transformers. This sword is a reproduction of the longsword that Drift from the Generations line. The word "Penance" is etched on one side in Autobot Kanji and the word "Vengeance" adorns the other side in Decepticon Graffiti, calling to mind Drift's personal struggles with the things he did as a Decepticon. This piece replaces the "bendy" plastic that shipped with the figure. See also my Drift short swords "Forgive" and "Forget" for the matching set.

This weapon will work with any 5mm fist hole. It also has a 3mm alternate peg so it can be used on either the G2P-005b Tech Spec or the G2P-005a Chromehead parts. It is a scaled recreation of Generation 1 Chromedome's handguns, though it will probably not work with the original toy.

Version 5.0

“The Obliterator cannon is huge. Not just in terms of its physical size, but its focused fusion core warheads can penetrate the most hardened of bunker walls through sheer overwhelming levels of energy. Even though most commanders are competent enough to wield this monster of a weapon, only the most power hungry, egomaniacal generals choose the Obliterator as their signature weapon. It is as if no other weapon can provide them the rush of pure power that the Obliterator does.

It is even rumoured that some legendary warriors harness the dark matter from dying stars to boost their cannons to unimaginable levels of power, enabling them to destroy planetoids with a single hit. As with most rumours, claims of these capabilities are unsubstantiated.”

The Atomic Obliterator requires some assembly, and more adventurous customizers will find out that the space in the cannon allows for installation of an LED and a switch. Two handle pieces have been provided per set, and they can be mounted on sockets located front and rear of the cannon. An additional ‘fusion pistol’ is also included to round up the entire set.

The Obliterator is 10.8 cm long.

This model has been successfully tested in White Strong Flexible and Alumide.

You can get the 'Lite' version here. This version does not support LED installation and is simpler in construction.

This large cannon was designed as an upgrade for the HA Thunderhead. It is designed to mount in his turret. It is equiped with a 5mm peg which allows it to be a hand held rifle for other transformer figures as wel.

Version 1.0

This is a Bad Comedian's Hat for the Fall of Cybertron deluxe Starscream figure! It is only meant for wearing in bot mode, but Starscream sure looks regal wearing it!

A tab on the back of the hat clips onto Starscream's head and makes sure it stays securely on.

This Hat has been successfully tested in Frosted Ultra Detail and that material is very much recommended. Take the usual precautions with this brittle material, though.

Version 2.0

This is a set of 6 spider legs for the Beast Hunters cyberverse Airachnid figure! The legs extend out from a central mount that attaches to the 3mm port on her back, and each leg has 4 joints for maximum posability!

Additionally, each leg ends off with a claw that can hold compatible 3mm peg weapons. This set of legs is sturdy enough to support the weight of the cyberverse figure.

This model is successfully tested in Black Strong Flexible and that material is recommended.

  An energon flail for Megatron, or any 5mm fist hole. This version does not require assembly.

Version 2.0

"The Pulsar Proliferator fires a burst of 'mini-pulses' at every trigger pull, and each pulse disintegrates on impact to discharge a potent energy packet on the target. Unfortunately, field tests have not proven promising as the pulses dissipate over a short distance, which basically allows longer ranged opponents to dominate the battle field. In closer ranged combat however, the total pulsatory impact is devastating."

The Proliferator is held using a removable 5mm peg handle which can be installed in the stock on under the main chassis for maximum adaptibility with different figures. There is a 3mm clip rail behind the pump handle for additional accessories.
The Profilerator is 7.0 cm in length.

This model has been successfully tested in White Strong Flexible.

Version 2.0

“None but the mightiest soldiers are able to wield the Cosmic Defenestrator. Originally designed for anti-flier defenses on orbital space stations, the Defenestrator has seen action in all theatres of war. This is very much due to the massive firepower it can bring to bear on its enemies. Its special recoil-absorbing tri-barrel system ensures a insanely high rate of fire of high-calibre shells while preventing the arms of the gunner from being sheared off by the massive forces involved.

Particular flier squadrons made it their modus operandi to load up on magazines of oxidizate shells, achieve altitude and let loose with a relentless cloud of metal eating projectiles. Even with the horrific consequences we have witnessed, no soldier was ever caught and tried for war crimes.”

The Cosmic Defenestrator comes with a main handle that can be mounted in 2 positions, as well as an auxiliary handle on a balljoint. This second handle can be clipped onto any 3mm rail, and can be used to offer additional support for the Defenestrator’s weight. Also, this set comes with a laser sight accessory.

The Defenestrator is 10.9 cm in length.

This model has been successfully tested in White Strong Flexible.

Smoke stacks to replace the rubber ones in the Leader Class Optimus Prime figures. Simply remove the rubber ones and insert these.

This is the version B that is 1cm longer than the original model.

Note: please make sure that you've done any painting/effects to these before install. The Strong & Flexible material won't take several installs and removals.

Version 1.6

This is a pair of KaBlammer accessories compatible with the Thugmeister and Dejector designs. Each one is held by a 3mm peg handle, and all four 'prongs' at the lower end are posable.

Some assembly is required.

Version 1.5 has been tested in Strong Flexible and Frosted Ultra Detail. Printing in Strong Flexible is recommended. The latest version has been tweaked to reduce breakage in FUD, but still do take care during assembly.

Radicon thread here.
Flickr gallery here.

Version 2.0

“As the war dragged on for centuries, energy and ammunition supplies have dwindled and commanders are issued emphatic instructions to conserve the use of ammo. The Hyperfire Fragmentator was created in response to that need. It discharges tight photon packets in controlled bursts, which are supplementarily accelerated through the use of Lorentztatic rails along the barrel. This process allows the wielder of the weapon to engage middle to long distance targets accurately, reducing the possibility of missed shots and wasted ammo. A smart, smooth operating weapon for chaotic times.”

The Fragmentator possesses a ball-jointed handle assembly that allows the handle to be located within the weapon’s chassis for show-accuracy, or under it for maximum adaptability. The bar at the top is actually a 3 mm clip rail that can be used to mount compatible accessories.

The Fragmentator is 7.85 cm in length.

This model has been successfully tested in White Strong Flexible.

Version 2.0

“A recent addition to the galactic arsenal, the Gyrocentrix Asunderizer is designed for scouts and light troopers by virtue of its high ratio between physical size and energy output. A mini cyclotron reactor within charges up over a period of 15.6 microcycles, gathering enough energy to tear apart even the largest soldiers in 1 shot. Unfortunately, the mini-cyclotron technology is still new and unstable, and many have reported less than feasible results during field tests. Some candidates even have their appendages torn apart from exploding reactors, necessitating emergency amputations and replacements. Nevertheless, the most suicidal of our hunters took to this new weapon with great glee.”

The Asunderizer comes in 2 parts; the rear handle segment, and the front rotating barrel. The rear half provides 2 3mm clip rails and the barrel tube has 3 3mm peg holes, all for maximising customizability.

The Asunderizer is 4.4cm long.

This model has been successfully tested in White Strong Flexible.

Version 1.5

“A huge, hefty weapon. The Judicator is the go-to weapon for field commanders and heavy soldiers, for very good reasons. Not including those massive personal artillery platforms, the damage output of the Judicator is one of the highest among our infantry weapons. It is very accurate and reliable. Alas, it is also notoriously rare. The Judicators are manufactured in a different epoch, where the strength of our civilisation is the strongest. The performance of this weapon is a testament to the artistry, engineering and wisdom of that past. Unfortunately, thousands are lost through the centuries no thanks to war, attrition and the misappropriations of the under market.”

Due to the nature of its rotating handle, the Judicator will require some assembly. It comes in a kit of 5 pieces. The handle can be positioned to the side or the bottom of the chassis, and the barrel is rotatable as well.

The Judicator is 9.75 cm in length.

This model has been successfully tested in White Strong Flexible.

Version 2.0

“As the flight technologies of the enemy grew more advanced, so has our missile guidance systems. The Quadricore Explodator employs high speed, thermoexplodite concussion warheads with intelligent energy seeking sensors that can take down all but the most skilled of fliers. The ominous shadow of a nightmarish threat has been reduced to something more manageable.”

The Explodator can be separated into 2 pieces: A ‘fist missile’ launcher and a quad barrel heavy blaster! Both elements have a 3mm rail on the side for customization.

The assembled Explodator is 5.4 cm in length.

This model has been successfully tested in White Strong Flexible.

Version 1.0

This is Part B of the Spinal Tapper model consisting of the blade. It mounts onto the handle via a 3mm peg which can also be used on any compatible 3mm ports. Printing in Frosted Ultra Detail is recommended.

This model is successfully tested in Frosted Ultra Detail.

Click here for Part A.

Requested Size

Version 1.5

“Scorched earth - This phrase brings up many images, but none are stronger than those of companies of troops armed to the teeth with Artillerators on the move to kill a city. These soldiers advance slowly, launching an unceasing hail of magmatic shells to soften up the very tectonic underbase of the city itself. There is usually nothing left of a once thriving place, except a lake of molten metal and the hollow screams of the lifesparks within it.”

The HEAT Artillerator comes in a set of 4 pieces: The chassis, the handle, the mini-mortar launcher and the connecting mortar clip. With the mortar clip attached to the mini-mortar launcher, you can mount the latter on the main chassis or on any compatible 3mm rail. The handle segment is on a rotating joint to allow many different holding configurations.

The Artillerator is 7.2 cm long.

This model has been successfully tested in White Strong Flexible.