The Hyphae lamp is a series of organic table lamps based on how veins form in leaves. Each lamp is a completely one-of-a-kind design 3D-printed in nylon plastic. The lamps are lit by eco-friendly LED's and cast dramatic branching shadows on the wall and ceiling. 

Video
watch it grow at http://vimeo.com/nervoussystem/hyphaelamp

About Hyphae
Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.

Lighting Specifications
The lamp comes with an eco-friendly 3-watt 200 lumen LED light fixture with three bright Cree LED's that will last for 6 years of continuous use. It is UL-listed and works off a 120V or 240V outlet.

Please contact us at http://n-e-r-v-o-u-s.com/contact.php to receive the lighting components for the lamp.  We will send them to you free of charge if you purchase the lamp shade.

This design was inspired by the swirling seed heads of Clematis flowers. When I first saw the seed pods, the first thought that came to my mind was, "The flower is dancing." This model took me longer than expected to finish. My first model was a chaotic tangle of lines. (It looked like the flower went mad instead... hahaha) I went back to look at references to try to capture the original lightness and motion of the flower seeds. At the end, the model was tweaked further to make sure none of the tails intersect each other.

Julianna fractal lace,  fractal model, with a loop at the top for hanging.
Wear as a pendant , hang it on a wall, or near a window.

15.3cm X 9.5cm

The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu

This is a bottle. But not just any bottle, a special bottle. This bottle has no top or bottom, nor a front or back, nor even an inside or outside. This special bottle is called a klein bottle.

Klein bottles are non-orientable objects, meaning they have no definable sides. The outside flows to the inside and back again, making it impossible to discern between the two.

Of course, this isn't a real klein bottle. It would be physically impossible to create a real klein bottle. Like my mobius strip-based models, this is the closest possible 3-dimensional representation of the object. Still, it's mathematical and theoretical properties are evident and fascinating.

The Lichenfan light shade is pictured 3D printed in Shapeways 'sandstone' material, a very rigid, hard material that feels like sandstone. It is pictured here as a lamp shade.
This is Part A (the main part) and Part B of the lamp can be separately purchased 3D printed from Shapeways.
The lamp base, electricals and light fittings are not included. The lamp base pictured is 'Hemma' from IKEA. Alternatively just use the lamp shade with an L.E.D candle (battery powered 'candle'). See photographs of the light shade with an L.E.D candle.

Care instructions:The material is brittle if dropped on hard surfaces, so handle it as you would a precious ceramic object. SAFETY NOTE: Not suitable for use with real candles. 

An organic-looking, sculptural fractal light shade, to add fascinating illumination to your room. This sculptural form is constructed using 3D printing. This technology can achieve intricate details and complex undercuts that could not be created using traditional manufacturing processes.

See a gallery of images of this Lamp shade on the unellenu website. 

unellenu website
http://unellenu.com

The unellenu store on shapeways
http://www.shapeways.com/shops/unellenu

twitter: unellenu
http://twitter.com/unellenu

facebook: unellenu jewellery
http://www.facebook.com/unellenu

facebook: unellenu sculpture and homewares
http://www.facebook.com/pages/Unellenu/188186071212813

youtube: unellenu
http://www.youtube.com/unellenu1

Google +
Janelle Dehanne Wilson

While provocatively curved, she is indeed very shy!
She only allows a glowing glimpse of what she holds inside.

A light shade for LED tea-lights or a Luxeon/Cree LEDs
Hiding the source from direct view, resulting in a gentle light emerging

Specifications
This version is 12.5 cm high.
With a wall thickness of 1 mm.
The inside cavity is 4 cm wide and 6 cm high.
See pictures for details.

More
Multiple sizes and shapes available.

A slightly more robust version of Shell Ornament 2, with thicker ribs and a bit less rotation. The rib width is less than 0.7mm at the centre, but the rib depth is ~1.3mm. I expect some fusing and loss of detail in the centre, but not too much, I hope. The previous version is still available at http://www.shapeways.com/model/66469/shell_ornament_2.html.

this lamp 7,1 inches (18 cm large) is proposed with a very white led lamp.
50 ex limited edition, for each edition I change the file to change the number

interested by the lamp but prefer to receive the full version with the led bulb? let see my web site,

http://www.photophoreandco.com/en/index.html

' Seahorse Twist' , a small 3D fractal model with a loop at the top for hanging.
This 'seahorse fractal' can also be worn as a pendant.

The unellenu store on shapeways - for designer objects, fractal art, sculpture and jewelry.
shapeways.com/shops/unellenu

unellenu website unellenu.com

 twitter: unellenu http://twitter.com/unellenu

facebook : unellenu jewellery
http://www.facebook.com/unellenu
facebook: unellenu fractal sculpture & homewares
http://www.facebook.com/pages/Unellenu/188186071212813

youtube: unellenuhttp://www.youtube.com/unellenu1



Model#101218_form__018_8_0.7mm