by
fakebusker83
Version 1.6
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
A little robotic cat that transforms into a cyber cassette that fits into the deluxe War for Cybertron Soundwave figure! It comes with 2 detachable missile accessories.
Radicon thread here.
Flickr thread here.
by
fakebusker83
Version 4.5: Edited for peg locks to be sturdier.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
Finally, after a long wait and 4(!) iterations of design, here is the release version of the much anticipated Snitch! The Snitch is a robotic avian that transforms into a cyber-cassette mode which stores in the War for Cybertron deluxe Soundwave figure!
This version is successfully tested on WSF and FUD.
Radicon thread here
Flickr gallery here.
by
fakebusker83
Version 1.5
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
This is a show accurate weapon set for TF: Prime Powerizer Dreadwing!
This set contains a Big Blaster, a sword and 2 bombs! Both blaster handles are movable for adaptability, and all handles are 5mm compatible pegs. The sword features a 3mm c-clip to attach to the blaster and a 5mm peg for storage in other locations.
At the side of the blaster there is an auxiliary 5mm peg for use in storage on the figure's back.
The blaster and sword measures 149 mm and 128 mm in length respectively.
This model has been successfully tested in White Strong Flexible.
TFW2005.com thread here.
Flickr set here.
by
lorddragonmaster
Version 4
This is a completely show accurate weapon for TF: Prime Voyager Optimus Prime. This is the legendary Star Saber, featured in season 2 of TF:Prime. Weild the power of the Primes with a weapon that towers over Optimus himself!
The sword and handle separate and will fit into the 5mm hands of any Transformer.
The blade measures 186 mm in length and is an imposing sight for any Decepticon.
This model has been successfully tested in WSF and FUD!
Please note the sword does not come in colour/or painted.
by
fakebusker83
Version 2.5
Note: This version is the non-ported set. It does not have peg holes on the back fillers.
This is an upgrade set for the TF: Prime RID deluxe Knockout figure! In this set you will receive a pair of shoulders, a pair of back fillers, 1 paralyzer spear, 1 cutting saw and 1 trephinator drill accessory.
The shoulders replace the original, and they can fit nicely in alt mode. The back fillers can be pegged onto the sides of the car to act as booster rockets for Knockout. Let's face it, a bot like him needs speed as well as looks.
The saw and drill accessories have 5mm peg handles and can be held in the figure's fists, or they can also be mounted straight into his forearms.
This set is successfully tested in White Strong Flexible.
For the ported version with extra 5mm peg holes, click here.
TFW2005.com thread here.
Note: This version is the non-ported set. It does not have peg holes on the back fillers.
This is an upgrade set for the TF: Prime RID deluxe Knockout figure! In this set you will receive a pair of shoulders, a pair of back fillers, 1 paralyzer spear, 1 cutting saw and 1 trephinator drill accessory.
The shoulders replace the original, and they can fit nicely in alt mode. The back fillers can be pegged onto the sides of the car to act as booster rockets for Knockout. Let's face it, a bot like him needs speed as well as looks.
The saw and drill accessories have 5mm peg handles and can be held in the figure's fists, or they can also be mounted straight into his forearms.
This set is successfully tested in White Strong Flexible.
For the ported version with extra 5mm peg holes, click here.
TFW2005.com thread here.
by
fakebusker83
Version 1.0
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
In this set, you get a pair of Slammer accessories for Thugger 4.0!
Each order includes 2 piston pieces and 4 Slammer bits. Every piece has connection ports which allows ultimate customisability!
You can assemble 1 piston and 2 Slammer bits to form a complete Slammer accessory, or you can mount 1 Slammer bit on the Thugger's forearm to create a kick-ass knuckle duster accessory!
by
fakebusker83
Version 1.0
This is a pair of hands for the TF: Prime Powerizer Dreadwing Skyquake figure! Each hand is connected to its wrist adaptor via a ball joint, and the fingers are on a hinge to allow opened and closed poses.
The hands are shaped to hold most 5mm peg weapon accessories.
This model is tested on White Strong Flexible and that material is recommended.
This is a pair of hands for the TF: Prime Powerizer Dreadwing Skyquake figure! Each hand is connected to its wrist adaptor via a ball joint, and the fingers are on a hinge to allow opened and closed poses.
The hands are shaped to hold most 5mm peg weapon accessories.
This model is tested on White Strong Flexible and that material is recommended.
by
fakebusker83
Version 1.5
This massive accessory measures 163 high, 112mm wide and 40mm in diameter for each hammer head. Some assembly is required.
The 5mm diameter handle can be used with most compatible hands.
The Etnarium has been successfully tested in White Strong Flexible.
This massive accessory measures 163 high, 112mm wide and 40mm in diameter for each hammer head. Some assembly is required.
The 5mm diameter handle can be used with most compatible hands.
The Etnarium has been successfully tested in White Strong Flexible.
