by
TheoJansen
The third public evolution of the Animaris Geneticus Parvus. #7 has evolved legs, with pointy feet instead of flat. Featuring a fully working Theo Jansen mechanism as used in his work "the Rhinoceros".
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.
- The best way to push it is by its nameplate. Do not push down, but forward.
- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.
Also see our new Propeller Propulsion add-on, to have your Strandbeest walk autonomously!
The mechanism is printed assembled, and will work without further assembly right after birth from the printer.
A few tips to consider:
- After birth there might be a little powder left in some joints, or it might not go supersmooth. This will fix itself after the animal has a little bit of practice!
- Some surfaces work better than others. The legs require a little friction, and a flat surface. So for example: A rough table or floor, thin flat carpeting, or a thin rubber sheet. It will slip on a too smooth surface.
- The best way to push it is by its nameplate. Do not push down, but forward.
- The beest is light, but quite strong. It can actually be dropped without breaking. It is not a "toy" however, and not suitable for children. The 3D printer material is easy to stain so clean hands are advised.
by
TheoJansen
[Note: This propeller propulsion add-on does not include a 3D printed Strandbeest, which should be bought seperately! This propeller does not fit the Ondula version!]
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
Theo Jansen’s 3D printed Strandbeest continues to evolve with the addition of a Propeller Propulsion system! The 3D printed Strandbeests can now walk autonomously, powered by the wind, just like Theo's full-scale Strandbeests. The new propeller add-on gives new and existing owners of these kinetic sculptures a new way to set them in motion!
The propeller addition is available as a separate kit, which can be mounted on the 3D printed Strandbeests. The propeller is compatible with the various evolutions of the Strandbeest, so existing owners of the “AGP” 5 and 7 model Strandbeests can use it as well. Consisting of 5 main parts, it can be mounted on the Strandbeest body in a few simple steps.
Also see our videos of the Strandbeest Propulsion in action, and the video with mounting instructions.
The 3D printed Strandbeest is sold separately.
A few tips to consider:
- Please look at our instruction video on mounting the Propeller Propulsion add-on, here.
- After mounting the Propeller Propulsion add-on it is best left mounted. Frequent dis-assembly can wear down the material which can result in play on the mechanism.
by
avandius
Dice set with percentile modeled in a Steampunk theme. The dice range from 16mm to 24mm.
by
shengchiehchang
Protective and decorative case for Iphone 4 / 4s.
It is a monocoque with double layered "brain cell" structures.
NEW pattern updated! April 2013.
For iPhone 5, please go to this page
NEW pattern updated! April 2013.
For iPhone 5, please go to this page
by
DavidSun
As seen on blog.objet.com, this is the updated model of the one shown in video.
Now you can open the doors! This is the mid size model -- 2cm long. NO ASSEMBLY REQUIRED!
You are getting one model per print/order.
Let me know if anyone needs special text version. (thank you, happy birthday, etc)
** The older model, shown in video, is also available in my shop. **
by
aegidian
Ten 1:200 scale miniatures in the the style of a 2010/2011 season Formula One car (with a small rear wing, large 'snowplough' front wing, high nose and slim 'coke-bottle' engine cover.)
Designed to be made in Stainless Steel, but equally good in white/black/transparent detail acrylic. Supplied unpainted, but with a good eye and a fine brush you should be able to recreate most team liveries.
Designed to be made in Stainless Steel, but equally good in white/black/transparent detail acrylic. Supplied unpainted, but with a good eye and a fine brush you should be able to recreate most team liveries.
by
virtox
It arrived in WSF, and it works for real :-)
Gear system based on hypotrochoid shapes.
It is printed as a 9 piece puzzle, a VERY frustrating one at that ;-)
Depending on the print batch, it might need some minor sanding to make it run properly.
Steel available on request, still untested by me.
I think steel will work but probably needs some more sanding to make it fit.
With the new pricing scheme, the steel version is no longer available.
If you want one in steel, please send me a message and we will find a way.
Gear system based on hypotrochoid shapes.
It is printed as a 9 piece puzzle, a VERY frustrating one at that ;-)
Depending on the print batch, it might need some minor sanding to make it run properly.
Steel available on request, still untested by me.
I think steel will work but probably needs some more sanding to make it fit.
With the new pricing scheme, the steel version is no longer available.
If you want one in steel, please send me a message and we will find a way.
by
MINGLES
A LEGO scaled version of the Master Sword, a blade featured in The Legend Of Zelda series.
by
Chaffmar
A custom designed electric guitar perfect for Lego minifigs. (Does not actually make sound)
Recommended Materials:
White Detail OR
Strong and Flexible
Recommended Materials:
White Detail OR
Strong and Flexible
by
virtox
A hanging cup for your double espresso the morning after ;-)
It's in such a state that it cannot stand on it's own, so it really needs some support.
Luckily it has :-)
When you order, you will get the Hangover cup and the matching stand in glazed ceramics.
Printed Ceramics
With the current process, the round bottom on the cup will likely show some minor pits in the glazing from a small tripod it stands on during the baking.
And the bottom of the stand/saucer has rougher structure.
The rest of the glazing is fully covering, so it's safe to drink from.
Also available as a more sober version (standalone)
The cup is designed for a double espresso(60 ml), but can hold a maximum of about 90 ml.
Check out this photo of black version here
It's in such a state that it cannot stand on it's own, so it really needs some support.
Luckily it has :-)
When you order, you will get the Hangover cup and the matching stand in glazed ceramics.
Printed Ceramics
With the current process, the round bottom on the cup will likely show some minor pits in the glazing from a small tripod it stands on during the baking.
And the bottom of the stand/saucer has rougher structure.
The rest of the glazing is fully covering, so it's safe to drink from.
Also available as a more sober version (standalone)
The cup is designed for a double espresso(60 ml), but can hold a maximum of about 90 ml.
Check out this photo of black version here
by
henryseg
This steampunk style knotted cog was procedurally generated using 3-dimensional spherical geometry, then stereographically projected into our (mostly) Euclidean universe.
Other sizes:
www.shapeways.com/model/231026/knotted_cog__large_.html
www.shapeways.com/model/231045/knotted_cog.html
www.shapeways.com/model/277265/knotted_cog__smaller_.html
www.shapeways.com/model/232385/knotted_cog__small_.html
Other sizes:
www.shapeways.com/model/231026/knotted_cog__large_.html
www.shapeways.com/model/231045/knotted_cog.html
www.shapeways.com/model/277265/knotted_cog__smaller_.html
www.shapeways.com/model/232385/knotted_cog__small_.html
by
noesis
The CardCase is now customizable! See Below
The CardCase for the IPhone 4 does what other card carrying IPhone cases can do and then some!
The sleek, patent pending, snap-on case not only protects your IPhone, but can also replaces your wallet or current business card holder and the integrated card slot on the side allows you to use any available card as an instant stand in portrait or landscape mode! Perfect for watching movies on the go, Facetime chatting, or using your IPhone as an alarm clock!
The CardCase can comfortably hold 2 credit or ID cards, or 4-5 business cards, and works perfectly with either the AT&T or Verizon IPhone versions.
And the CardCase is now customizable! When ordering you can change the side text to anything you'd like up to 15 characters (company name, twitter username, real name etc.) you can also choose the text orientation and alignment.
Designed by Noesis Design Lab and manufactured by Shapeways, this durable nylon polyamide case has a unique look and grippy feel to help keep your IPhone (and cards) safe.
The case is shipped worldwide directly from Shapeways.
Available in a multitude of colors If you don't specify a color, the default is white
The CardCase for the IPhone 4 does what other card carrying IPhone cases can do and then some!
The sleek, patent pending, snap-on case not only protects your IPhone, but can also replaces your wallet or current business card holder and the integrated card slot on the side allows you to use any available card as an instant stand in portrait or landscape mode! Perfect for watching movies on the go, Facetime chatting, or using your IPhone as an alarm clock!
The CardCase can comfortably hold 2 credit or ID cards, or 4-5 business cards, and works perfectly with either the AT&T or Verizon IPhone versions.
And the CardCase is now customizable! When ordering you can change the side text to anything you'd like up to 15 characters (company name, twitter username, real name etc.) you can also choose the text orientation and alignment.
Designed by Noesis Design Lab and manufactured by Shapeways, this durable nylon polyamide case has a unique look and grippy feel to help keep your IPhone (and cards) safe.
The case is shipped worldwide directly from Shapeways.
Available in a multitude of colors If you don't specify a color, the default is white
by
Mr_props
a small ball and socket character to play with and customize. Can be used with most famous bricks. Please be gentle when assembling the parts. Any comments are welcome :)
by
MINGLES
A LEGO scaled version of the Hylian Shield, a shield featured in The Legend Of Zelda: Twilight Princess.
by
stonysmith
1:220
Updated Feb 4, 2010 - fixed small problem over rear fender
Updated Feb 4, 2010 - fixed small problem over rear fender
by
mctrivia
side is read be number of planet gears on the top side. spinning any gear should cause all other gears to move. great care has been taken so die is perfectly weighted no mater what position gears are in.
Has been printed. FUD is to soft to allow gears to work. Looks really cool though.
Has been printed. FUD is to soft to allow gears to work. Looks really cool though.
by
NovastarDesign
The molar teeth-shaped Brush'eM ! Kids is a funny toothbrush-holder with holes, which in it's own little way might contribute to the dental care awareness of kids.
This work is copyright © Novastar Design, Netherlands, 2011-2012. All rights reserved.
This work is copyright © Novastar Design, Netherlands, 2011-2012. All rights reserved.
by
Oskar_van_Deventer
Magic Gears is a paradoxical set of three identical gears that can both mesh in the regular way and all in the
same direction. It was inspired by this YouTube video by Jacques Maurel. Maurel writes: "The paradoxical 2 teeth
gear set is used in the 'Mercier differential' (using the torque transfer technology) Patented in 1988 by
Renault". Oskar's addition to the work is making Chevron Gears as
invented by Andre Citroen. This way the three gears become identical and they can both mesh classically and
paradoxically.
I have performed this Magic Gears "trick" to several friends, family and colleagues. I get two types of reactions: "wow" and "so what". Apparently, there exist people who are not aware how gears are supposed to mesh :-).
Watch the YouTube video.
Read at the Shapeways Forum.
Read more at the Non-Twisty Puzzles Forum.
The set is delivered as a DIY kit. You will have to add five M3x60 bolts yourself.
I have performed this Magic Gears "trick" to several friends, family and colleagues. I get two types of reactions: "wow" and "so what". Apparently, there exist people who are not aware how gears are supposed to mesh :-).
Watch the YouTube video.
Read at the Shapeways Forum.
Read more at the Non-Twisty Puzzles Forum.
The set is delivered as a DIY kit. You will have to add five M3x60 bolts yourself.
by
JamesSaunders
Reduced price on WSF!
Display your crayons loud and proud. Don't throw them in a dingy box, stick them in the Porcupine Crayon Holder. Great for kids, art students, and anyone who likes crayons and is proud of it.
by
WelshDesigns
This is a hollow version. Very accurate representation. It is 3.0 inches in diameter. There is a very small hole at the bottom. Can be easily filled with epoxy and painted over white. It's white there because there is snow there. View in 3D and hold the up/down arrows and you'll see the hole come around. View my store for a solid and smaller version.
Rick
I just updated the design to be a bit thicker to allow the printing process to be more successful. Apologies to those who tried to print this recently and it failed. It did print before, but it was difficult to get finished, so I've had to increase the wall thickness. Again, sorry for the inconvenience.
Rick
by
JoshuaHarker
Mini desktop dumpster. Holds your pens, phone, & other crap. Plastic models are good for graffiti & stickers while the gold plated model shows how classy & rich you are. Snap on lids are sold separately so you can mix & match material & colors. Old boxes of nudie mags not included.
by
byShapeways
Turn any photo you have into something very special and personal with the Full Color Photoshaper
The full Color Photo Photoshaper is available in 3 different sizes 10x7cm - 13x9cm - 15x10cm
this is the template of the 15cm x 10cm
The full Color Photo Photoshaper is available in 3 different sizes 10x7cm - 13x9cm - 15x10cm
this is the template of the 15cm x 10cm
by
tinypurpletreehouse
Draw some attention to your hand with this adorable Robot Girl!
Also a very nice gift for the special girl in your life ;)
~
Personalize your ring by choosing a ring size.
Default size is 5 (USA) / 15 (NL)
If you want another size than listed below, please don't hesitate to ask me! ^_^
~
Sizes
~
Size 5 / 15
Inner diameter: 0.61 inch / 15.70 mm
Inner circumference: 1.94 inch / 49.21 mm
~
Size 6 / 16
Inner diameter: 0.64 inch / 16.51 mm
Inner circumference: 2.06 inch / 52.39 mm
~
Size 7 / 17
Inner diameter: 0.68 inch / 17.35 mm
Inner circumference: 2.19 inch / 55.56 mm
~
Size 8 / 18
Inner diameter: 0.71 inch / 18.19 mm
Inner circumference: 2.31 inch / 58.74 mm
~
Size 9 / 19
Inner diameter: 0.74 inch / 18.89 mm
Inner circumference: 2.44 inch / 61.91 mm
~
Size 10 / 20
Inner diameter: 0.77 inch / 19.84 mm
Inner circumference: 2.56 inch / 65.09 mm
~
Size 11 / 21
Inner diameter: 0.81 inch / 20.68 mm
Inner circumference: 2.69 inch / 68.26 mm
by
mendelheit
This little cushion is based on that great Meshlab Tutorial:
http://meshlabstuff.blogspot.com/2009/03/creating-voronoi-sphere.html
This might look good in alumide!
http://meshlabstuff.blogspot.com/2009/03/creating-voronoi-sphere.html
This might look good in alumide!
by
BAROBA
Sporty jeep with different moving parts:
-Suspension with springs allowing the jeep to go up and down.
-Doors open and close.
-Hood can open and close.
-window can open and close.
Not 100% optimised model
Wheels can turn.
-Suspension with springs allowing the jeep to go up and down.
-Doors open and close.
-Hood can open and close.
-window can open and close.
Not 100% optimised model
Wheels can turn.
by
Jiovanie
A toy car I designed for my baby boy. These make great "3d color your own car" toys.
The wheels spin! I've added an axle that runs through the body attached to the wheels for it to roll along.
The wheels spin! I've added an axle that runs through the body attached to the wheels for it to roll along.
by
MindEversion
the pictures are showing it in stainles steel.
by
richgain
A hollow cube shape based on 13x13x13 1mm cubelets.
The design replaces the straight edge between each cube vertex with a long folded spring. The White Strong and Flexible material is ideal for making a strong, springy cube that can be used to make puzzles and perhaps many other things.
The design replaces the straight edge between each cube vertex with a long folded spring. The White Strong and Flexible material is ideal for making a strong, springy cube that can be used to make puzzles and perhaps many other things.
by
notnorm
This is 2 pack of Robot Law Enforcement Dogs. The dogs are in different positions but are otherwise identical. They have a control panel on their left shoulder blades to allow programming. They are 15.5 mm in height (about waist high on a 30mm figure). They are attached at the feet by sprues which must be carefully trimmed away by a sharp razorblade. These figures are intended to be glued to a 28mm
