A replica of Cobb's totem from the film "Inception". As a below review has noted, and from my own version, the top works very well, and spins upwards of 90 seconds before toppling. You just might be in a dream.

Since the response has been so great. I am raising funds on Kickstarter to offer a more refined product with nickel plating and milled from steel. Click here to support my Kickstarter

Even if you would like to order the 3D printed version here, please consider backing the Kickstarter to help me launch the product more affordably and with greater fidelity.

Have a new MacBook? Here's a little tool to help you keep a MagSafe adapter on you at all times :) And here is a link to the converter just in case, Apple Store MagSafe Converter

Inspired by the well known mobius strip (discovered by August Ferdinand Möbius in 1858), an interest in the unusual, and 3D modelling, I created the Twin Rail mobius pendant.

A half shell and 3 rails form a bearing-like structure to encapsulate a train of 6mm balls in a mind-warping cage with a twisting, fascinating movement bringing to life the only pendent of its kind in the world.

Includes a 4mm loop for attaching to a necklace or leather cord.

See the photographs with retro-fitted 31 6mm chrome steel ball bearings... in the bottom photo, the balls have been heated until they 'blue'... check out the video to see how they move by clicking on the little icon below the camera above.

Also available smaller and in silver, Twin Rail Mobius Pendant - small


Note: this item is the shell alone, you will need to aquire and fit the balls (31 x 6mm or 29 x 1/4 in) as well as a suitable necklace to hang it from, a 3mm leather cord works well.

CableGuy is currently not available through the Shapeways site. My new product The Wrap, a handy cable winder for the European iPhone charger, can be found here.

CableGuy - cable winder and clip for Apple earphones

Many of us are familiar with two little issues related to the earphones we use with our iPhones and iPods. First, what do you do with ‘m when you’re not using them; and second, where do they go when you take out your buds for a few seconds.

CableGuy solves both of these problems for the Apple earphones that our iGadgets come with. The earbuds and plug find a home in the slots in CableGuy, while the cable can be wound neatly (or not so neatly, if you prefer) around it - making cable spaghetti a thing of the past.

But that’s not all. Clip it to your t-shirt, shirt pocket or bag, and CableGuy keeps your earphones from dropping to the floor when you’re on pause, using either the build-in cable clip or the earbud-fitting slots.

The Wrap - cable winder accessory for European iPhone charger

If you are from Europe and have a recent iPhone, you will probably recognize the charger shown here. You may also have noticed that you can almost wind your USB cable around it - but not quite, frequently resulting in pocket spaghetti.

I realized that one end of the charger is already perfectly fit for the job, and all you really need is the same shape on the other side as well. The Wrap provides just that, clipping securely onto the USB plug.

The Wrap is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Works with recent European iPhone chargers and USB cables as shown in the images, up to iPhone 4 and 4S - please check before you purchase. Does not work with iPhone 5 cables. To save on shipping costs, you may want to consider buying two or more; you know your friends will love you for it. Product is shipped in basic Shapeways packaging. Some powder residue from the 3d printing process may be found on it; if this is the case, it should be easy to clean off.

You can have a look at all the products in my shop here. If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com, or contact service@shapeways.com. If you like, follow me on twitter.

By popular demand, a US version of The Wrap is now available here.

A wholesale offer of 5 units of The (European) Wrap at reduced prices is now available here.

This steampunk-inspired pendant features three gears that spin round and round the center handle and gear. The gears, front, and clock hand all spin at different rates, producing a fascinating spin that will keep even the most fidgety hands occupied.

For the full effect, take a look at the video on youtube!

Thanks to José I. Romero for an insane amount of work on this design.

Gear Wraps are small, lightweight cable wraps to keep earbuds, charging, and USB cables organized. Designed as an addition to the everyday carry aesthetic, when printed in ABS, they're strong, light, quick to use, and a great way to keep cables organized in a backpack or messenger bag. More information here: http://work.eddielicitra.com/Gear-Wraps

Angryman - iPhone stand headphone wrap

Want to keep your headphones tidy? Want to keep your iPhone upright while watching a movie?

The Angryman is an all in one iPhone stand, cable tidy and cable shortener. Keep your headphones on a key chain when not in use, then simply unwrap them and you can use the Angryman as an iPhone stand while you watch a movie. Perfect for trains, airplanes or even for everyday use at your desk.

Holds the iPhone at various angles and positions. Also clips on to your iPhone. Available in a range of colours.

Works with iPhone 4/iPhone 4s and iPod classic

Click here to visit our site

Or click here to keep up to date on Facebook

This is a ring for the special one.
When you look at the quarter cut ball from front,
you'll see the love in there.

I made them in US size, so there's the most common sizes 6, 7, and 8.
This one is size 8 (18.1mm) Size 6 Size 7 Size 8


If any questions or different sizes to ask, please contact,

Salokannel

Contrary to popular belief, scotch whisky is best not served with ice. Ice will shut down the flavour, instead a few drops of room temperature water will open out the flavour of the whisky. Add too much and you drown the whisky! This small jug can be used to hold water for adding 'just a drop' to bring out the full flavour of your whisky. Inspired by a water droplet, this would also look nice sitting on a shelf in any home. The large hole on the side is to fill the jug, if this hole is covered with your thumb when pouring, it also helps control the water flow for maximum control of the amount of water you add!

365 Hearts Pendant  

One heart created by 365 smaller hearts, symbolizing the love you feel for someone being built up of the many little things you like/ love the person for. 

The 365 hearts also represent the 365 days in a year. Love and time merge in harmony in this meaningful design.  

Imagine with this jewel you could for example: 
• gift a year of love and kindness. 
• wear eternal love, it has bonded mankind in beautiful ways.  
• celebrate the many special moments together.  
• give 365 valentine kisses.  
a perfect present for an anniversary, birthday or wedding.  

This video shows all hearts dance together to evolve into a large one. The unique 365 Hearts Design can only be realised in solid sterling silver by combining state of the art 3D printing technique with the classical ‘lost wax process’. 

Please note that the pendant is sold without the chain. The pendant allows chains with a diameter up to 3 mm. (0,12 inch), to pass through the ring nicely. The weight of the shown sterling silver jewel is 20 grams (0,68 oz.). 

If you have any questions or feedback on the jewel, please feel free to contact me. 

‘365 Hearts’ is my way of creating a tender three dimensional poet, with a musical touch. 

Hope you enjoy my creation, 

Marc