PayPal is currently undergoing maintenance. Rest assured your order will still be processed. More details.
by
JoshuaHarker
The filigree design over the skull symbolizes ever growing renewal over the ghost of the past. This is the original design as featured on Kickstarter. It became their #1 most funded sculpture project of all time. Small is pictured sitting in the hand. See pic of all 3 sizes together for comparison.
by
MichielCornelissen
Important notice: a lot of people have been very happy with this product, but, as can be read in some of the comments below, it's clear that this design is right on the edge of what Shapeways can produce to the right quality at this moment. If you buy it, there's a risk of having a less then perfect fit, colors can be different from what you see on the screen, and, depending on how you use your phone as well as the tolerances of the case, it has been reported that the polyamide material can give a sort of polishing/scratching effect on the metal rim of the phone (you can find descriptions online of how to remove these kind of blemishes, but it may still be annoying).
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.
Essential protection for iPhone 4S and iPhone 4
Even though 4-4 may be the worlds lightest and smallest iPhone 4 case, it still provides great protection to the vulnerable edges of the iPhones' front and back covers - while all controls and connections remain accessible. Its slightly protruding profile helps prevent protect the glass when laying your phone down; using 4-4 can also help to avoid signal loss problems.
This bumper-style case may be combined with commercially available screen protectors. 4-4 is manufactured from tough and durable 3d printed polyamide; it has a slightly textured surface that gives you great grip on your phone. Available in white, black and limited edition colors - note that in white, the 3d printed material may get dirty more quickly - but you can (seriously!) dishwash this product, so that shouldn't be too much of a problem. The 4-4 case is designed to have a tight fit around for iPhone. To put the iPhone in the case, or take it out, start at one of the bottom corners, where there are no buttons. Colors in the images above are for reference only; please check under 'select material' to get the most up-to-date preview of currently available product colors. Product is shipped in basic Shapeways packaging.
4-4 fits the GSM and CDMA/Verizon versions of iPhone 4, as well as the new iPhone 4S.
A two pack of 4-4's in the same color is available at reduced prices here.
You can have a look at all the products in my shop here. Consider buying 4-4 together with The Wrap, a handy cable winder for the European iPhone charger.
If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com.
Shapeways has, in my experience, been very good with customer service on this item, so they'll be happy to either return your money or provide a new product if you would be one of the unlucky ones; but it's up to you if you want to run the risk that you may have to go through this process.
Essential protection for iPhone 4S and iPhone 4
Even though 4-4 may be the worlds lightest and smallest iPhone 4 case, it still provides great protection to the vulnerable edges of the iPhones' front and back covers - while all controls and connections remain accessible. Its slightly protruding profile helps prevent protect the glass when laying your phone down; using 4-4 can also help to avoid signal loss problems.
This bumper-style case may be combined with commercially available screen protectors. 4-4 is manufactured from tough and durable 3d printed polyamide; it has a slightly textured surface that gives you great grip on your phone. Available in white, black and limited edition colors - note that in white, the 3d printed material may get dirty more quickly - but you can (seriously!) dishwash this product, so that shouldn't be too much of a problem. The 4-4 case is designed to have a tight fit around for iPhone. To put the iPhone in the case, or take it out, start at one of the bottom corners, where there are no buttons. Colors in the images above are for reference only; please check under 'select material' to get the most up-to-date preview of currently available product colors. Product is shipped in basic Shapeways packaging.
4-4 fits the GSM and CDMA/Verizon versions of iPhone 4, as well as the new iPhone 4S.
A two pack of 4-4's in the same color is available at reduced prices here.
You can have a look at all the products in my shop here. Consider buying 4-4 together with The Wrap, a handy cable winder for the European iPhone charger.
If you have any questions or feedback on this product, please feel free to contact me directly via michiel(at)michielcornelissen(dot)com.
by
MichielCornelissen
The product at this page is the PadFoot model that fits perfectly to iPad 2 as well as the 3d and 4th generation iPad. For PadFoot for iPad 1, go here.
PadFoot, the popular viewing stand for iPad, is now available for iPad 2 and the 3d and 4th generation iPad.
PadFoot clips to the corner of your iPad and will securely stand it upright in both landscape and portrait mode. It’s great for watching movies, clips and slideshows, for making FaceTime calls, as well as for use in presentations and (shop) displays.
At just 10 grams, PadFoot is now even lighter and smaller than its predecessor, with an increased viewing angle for even more viewing comfort - while it’s as stable and sturdy as ever.
Price information
The prices of PadFoot have been reduced by up to 20%. If you like, you can save shipping costs by combining this product with another product, like the ones from my shop; or just browse the galleries. A wholesale pack of 4 PadFoots, at up to 30% lower prices, is available here.
General information
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
It's best to use PadFoot on a stable and horizontal surface. Always make sure that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. PadFoot will only work if your iPad has no cover on it. Product ships in basic Shapeways packaging. For more information, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot: one of fastcodesign’s most wanted products...
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
PadFoot, the popular viewing stand for iPad, is now available for iPad 2 and the 3d and 4th generation iPad.
PadFoot clips to the corner of your iPad and will securely stand it upright in both landscape and portrait mode. It’s great for watching movies, clips and slideshows, for making FaceTime calls, as well as for use in presentations and (shop) displays.
At just 10 grams, PadFoot is now even lighter and smaller than its predecessor, with an increased viewing angle for even more viewing comfort - while it’s as stable and sturdy as ever.
Price information
The prices of PadFoot have been reduced by up to 20%. If you like, you can save shipping costs by combining this product with another product, like the ones from my shop; or just browse the galleries. A wholesale pack of 4 PadFoots, at up to 30% lower prices, is available here.
General information
PadFoot is manufactured in tough but lightweight, 3d printed polyamide with a fine surface texture. Check the materials section of this website for more information. Colors are seasonal; current availability is shown at the bottom of this page - this may be different from the colors shown in the images above. Each product ordered is individually manufactured, just for you. If you are new to the Shapeways site: to order, you'll be asked to create an account (it's easy; you can even log in with Facebook or Twitter).
It's best to use PadFoot on a stable and horizontal surface. Always make sure that your iPad is placed all the way into the opening in PadFoot; resting the iPad on one of its two edges without buttons. PadFoot will only work if your iPad has no cover on it. Product ships in basic Shapeways packaging. For more information, visit www.michielcornelissen.com; if you have any feedback or questions on this item, please feel free to contact me directly at michiel (at) michielcornelissen.com.
Some of the reactions on PadFoot, when it was introduced:
“PadFoot - Finally an iPad stand I can settle on. The iPad stands up perfectly, and there is absolutely no wobble or shake... PadFoot is also absolutely great to watch movies on the iPad...”
smokingapples.com
“... I was surprised by how small and lightweight it was... the PadFoot is extremely portable... PadFoot will hold the iPad securely at an angle perfect for viewing slide shows or videos.”
the-gadgeteer.com
“This Little iPad Stand Can Still Do a Lot of Standing... The PadFoot does the job and stays out of the way.”
gizmodo.com
PadFoot: one of fastcodesign’s most wanted products...
fastcodesign.com
“... I think the PadFoot... is just the perfect partner for the iPad”
gizmodiva.com
“ Simple yet adorable: The PadFoot iPad stand. At first, I thought the iPad’s inherent lack of stand was a flaw... Now I’m kind of happy that the tablet didn’t come with one. Otherwise, we wouldn’t have cute little items like this...”
todaysiphone.com
“... the Padfoot, a minuscule, efficient iPad stand that is beautiful in its simplicity.”
freshbump.com
“We’ve seen quite a few iPad stands since it hit the market, but the Padfoot by Dutch designer Michiel Cornelissen is just a bit better than what I’ve seen so far... Perfect!”
minimalissimo.com
“Padfoot ist einfach und genial.”
stilsucht.de
Padfoot on NOTCOT
notcot.org
“Received my PadFoot. Works great!”
Robert, New York
...bought a PadFoot... Best iPad accessory ever! You won’t be sorry, it is so light... I love it.
‘xultar’
“Just got my beautifully minimal PadFoot iPad stand from Michiel Cornelissen. Nice!”
‘mr_phillip’, Scotland
“I’ve bought many accessories for iPad, but PadFoot is by far the most useful one I’ve come across. Simple, qualitative and ingenious.”
Mario, The Netherlands
by
nervoussystem
this piece is size MEDIUM
size LARGE also available
not sure which size you need? check out our sizing chart
An intricate, organic cuff from our Cell Cycle collection which was inspired by cellular forms. The C-shaped, flexible design fits close to the skin, is light-weight, and uses minimal material. The final product is built up layer by layer in durable nylon plastic using Selective Laser Sintering, a kind of 3D printing. Nylon is quite comfortable to wear because it is lightweight and flexible.
The design was formed in a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure. In our work, we start with a natural inspiration and translate that into interactive software which we can use to generate an infinite variety of forms and patterns.
size LARGE also available
not sure which size you need? check out our sizing chart
An intricate, organic cuff from our Cell Cycle collection which was inspired by cellular forms. The C-shaped, flexible design fits close to the skin, is light-weight, and uses minimal material. The final product is built up layer by layer in durable nylon plastic using Selective Laser Sintering, a kind of 3D printing. Nylon is quite comfortable to wear because it is lightweight and flexible.
The design was formed in a simulation of spring meshes. We created interactive software to morph, twist, and subdivide each design, transforming a simple mesh to a complex patterned structure. In our work, we start with a natural inspiration and translate that into interactive software which we can use to generate an infinite variety of forms and patterns.
by
nervoussystem
This 2in wide cuff is truly a bold accessory! It features a flexible C-shaped design that fits closely against the wrist. It was grown from 4 separate root points which gradually intertwined into a single network.
watch the video to see how it was created!
Hyphae is a collection of 3D printed artifacts constructed of rhizome-like networks. Inspired by the vein structures that carry fluids through organisms from the leaves of plants to our own circulatory systems, we created a simulation which uses physical growth principles to build sculptural, organic structures. Starting from an initial seed and a surface, we grow a hierarchical network where nodes constantly branch and merge. The densely interconnected structure is at once airy and strong.
by
Bathsheba
A pendant for metal printing. I have trouble believing that these are photos and not renders...something about this object feels very unlikely.
by
QUATRO
Product Name "CLaDOS Ring". Designed by QUATRO.
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)
If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.
Conversion chart for ring sizes:
US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm
I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)
Please note that this ring will come in a solid color/material! So please choose carefully! White plastic is good for DIY painting while steel and silver ones will shine your way to stardom :)
If you cannot find your size OR you just don't wear rings - try taking a look at my pendant!http://shpws.me/3NxX
Want to know more about the product?
Available in a variety of materials
The default size is ~20.32 mm in inner diameter but you can customize the size to your liking.
Click personalize to choose your US ring size.(Size support: # 8 to # 13.) Please refer to sizes at this page.
Conversion chart for ring sizes:
US Ring Size - Inside diameter
8 - 18.1mm
9 - 19.0mm
10 - 19.8mm
11 - 20.6mm
12 - 21.4mm
13 - 22.2mm
I hope you like this piece as much as I do:)
Be sure to tell a friend! Shop more at:
http://www.shapeways.com/shops/uncleQUATRO :)
by
Whystler
The nocturnal (or nocturlabe) is a very old instrument for telling time at night by measuring the stars. While concept is ancient, this design is all original. It is fully functional (all dials move properly) and meant to be worn as a pendant. This is now available for sale, as it has been tested and works nicely.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
How to Use the Nocturnal:
The top of the nocturnal is where you see a bit of a ring around a spike. This ring can be strung with a chain and makes it possible to wear the nocturnal as a pendant. When reading the nocturnal, this end of the piece should always be up.
Your first step is to set the outermost dial on the date. The months are shown as letters, with January and December at the top, and the progression of the months running *counterclockwise*. Note that the exact position of the letter actually marks the middle of that month. Look closer at the piece and you will see the line that separates the months between the letters.
Now, hold your nocturnal up to the starry night sky, making sure that the date is still properly set. Locate the North Star centred in the hole in the middle of the Nocturnal. Then use the central dial (the one that looks like a pointer) to point to the two stars at the end of the bowl of the *big* dipper.
Once you have this all set. Look closer at the pointer and you will see that within the pointer is an eliptical ring and within this is a smaller pointer. This smaller pointer points to a roman numeral, which shows you the time.
Note again, that the roman numeral is centred on the middle of the hour. So, if the little pointer points in the centre of the numeral, it is in fact half past.
So now you can tell time at night without a powered time piece. This is great for night owls, vampires, and those who appreciate a gothic or steampunk look.
by
MichielCornelissen
Don’t let unruly wires get between you and your music. Pod à porter is the easiest way to wear your music, and it’s now available for the iPod shuffle 4th generation.
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
Manufactured from tough but flexible, 3D-printed polyamide, Pod à porter is ultralight and has a finely textured surface finish; each ordered product is manufactured just for you. It fits the iPod shuffle 4th generation and its earbuds, leaving all controls accessible. It also works with other Apple earphones, including ones with a built-in remote control - make sure the plug is the same shape and size as the 4th generation shuffle's.
If you're new to the Shapeways site: to order, you'll be asked to create an account; you can sign in with twitter or facebook. Available in black, and limited edition colors shown below; check the support/materials section of this website for more information. Pod à porter is great for walking, strolling, commuting and many other activities, but it has not been specifically designed or tested for use during work-outs or sports, so it may not be suitable for your particular type of exercise. Product is shipped in basic Shapeways packaging.
Assembly is easy: just run the headphone wire through the product, and attach the Ipod shuffle. Have a look here for some images. If you have any feedback or questions on this item, please feel free to contact me directly through michiel-at-michielcornelissen-dot-com.
Some of the mentions of Pod à porter when it was originally released:
Wear your shuffle and nothing else...
gizmodo.com
Pod à porter, a 3d-printed iPod shuffle necklace
wired.com
Wanted: the cleverest way to wear an iPod shuffle
fastcodesign.com
Very smart.
joshspear.com
mocoloco.com
notcot.org
ilounge.com
design-milk.com
NY Times mentions Pod å`porter!
nytimes.com
by
dadrummond
A perfect scarab with all the little details. What an Egyptian metalsmith would have crafted, had the pharoahs dreamed of direct-metal printing.
Featured on BoingBoing, NotCot, and entymologically discerning sterna worldwide.
To wear as a pendant, a simple 2mm-thick cord works well.
Featured on BoingBoing, NotCot, and entymologically discerning sterna worldwide.
To wear as a pendant, a simple 2mm-thick cord works well.
by
byShapeways
Type in your text and we turn it into a customized metal branding iron.
Does not include the lighter.
The lighter is a BIC World, Classic, Maxi.
Want to make your own? Download the lighter attachment part here: http://www.shapeways.com/model/121517/ Do not flip/mirror the image, ie. please upload one you want as the actual result of the branding. If you have trouble uploading image like invalid file type, please make sure the filename has extension, for example, .jpg
Does not include the lighter.
The lighter is a BIC World, Classic, Maxi.
Want to make your own? Download the lighter attachment part here: http://www.shapeways.com/model/121517/ Do not flip/mirror the image, ie. please upload one you want as the actual result of the branding. If you have trouble uploading image like invalid file type, please make sure the filename has extension, for example, .jpg
by
rosethun@yahoo.com
Happy Valentines Day pendant,
or Wedding Favors,
Jewelry, key chain, or
Tschotske for your desk
Sculpture for your place
Be sure to look at all 3 dimensions!
